Research Output

2004

Mikromekaniikka: Nykytila, haasteet & visiot

Jokinen, A., Koskinen, J., Kosonen, T., Saarinen, M., Salmi, T. & Väätäinen, O., 2004, VTT Technical Research Centre of Finland. 156 p. (VTT Tuotteet ja tuotanto. Tutkimusraportti; No. TUO27-033070).

Research output: Book/ReportReport

2005

Design and Manufacture of Micromechanical Components and Devices

Salmi, T., Jokinen, A., Kosonen, T. & Heilala, J., 2005. 72 p.

Research output: Contribution to conferenceOther conference contributionProfessional

2018

Mechanical and magnetic properties of Fe-Co-V alloy produced by Selective Laser Melting

Riipinen, T., Lindroos, T., Metsä-Kortelainen, S., Keränen, J., Lagerbom, J., Manninen, A. & Pippuri-Mäkeläinen, J., 2018, Euro PM 2018 Congress and Exhibition. European Power Metallurgy Association EPMA, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Topology Optimization for Additive Manufacturing of Switched Reluctance Machines

Manninen, A., Keränen, J., Pippuri-Mäkeläinen, J., Metsä-Kortelainen, S., Lindroos, T. & Riipinen, T., 28 Oct 2018, (Submitted).

Research output: Contribution to conferenceConference articleScientificpeer-review

Topology Optimization of 3D Printed Switched Reluctance Motor

Manninen, A., Keränen, J., Pippuri-Mäkeläinen, J., Metsä-Kortelainen, S., Riipinen, T. & Lindroos, T., 10 Dec 2018, Proceedings of the NAFEMS Nordic Seminar.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsProfessional

2019

Exploring the Design Freedom of Additive Manufacturing through Simulation: Event Summary

Reijonen, J., 2019, In : Benchmark . July 2019 , p. 32-35

Research output: Contribution to journalArticleProfessional

Properties of soft magnetic Fe-Co-V alloy produced by laser powder bed fusion

Riipinen, T., Metsä-Kortelainen, S., Lindroos, T., Keränen, J., Manninen, A. & Pippuri-Mäkeläinen, J., 13 May 2019, In : Rapid Prototyping Journal. 25, 4, p. 699-707 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
3 Citations (Scopus)

Topology optimized soft magnetic cores by laser powder bed fusion

Riipinen, T., Pippuri-Mäkeläinen, J., Lindroos, T., Metsä-Kortelainen, S., Keränen, J. & Manninen, A., 2019, Euro PM2019 Congress Proceedings. USB ed. European Power Metallurgy Association EPMA, 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Wear of additively manufactured tool steel in contact with aluminium alloy

Huttunen-Saarivirta, E., Heino, V., Vaajoki, A., Hakala, T. J. & Ronkainen, H., 8 Jun 2019, In : Wear. 432-433, 202934.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)
2020

On the effect of shielding gas flow on porosity and melt pool geometry in laser powder bed fusion additive manufacturing

Reijonen, J., Revuelta, A., Riipinen, T., Ruusuvuori, K. & Puukko, P., Mar 2020, In : Additive Manufacturing. 32, 101030.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
1 Citation (Scopus)