Research Output

Design and Manufacture of Micromechanical Components and Devices

Salmi, T., Jokinen, A., Kosonen, T. & Heilala, J., 2005. 72 p.

Research output: Contribution to conferenceOther conference contributionProfessional

Exploring the Design Freedom of Additive Manufacturing through Simulation: Event Summary

Reijonen, J., 2019, In : Benchmark . July 2019 , p. 32-35

Research output: Contribution to journalArticleProfessional

Mechanical and magnetic properties of Fe-Co-V alloy produced by Selective Laser Melting

Riipinen, T., Lindroos, T., Metsä-Kortelainen, S., Keränen, J., Lagerbom, J., Manninen, A. & Pippuri-Mäkeläinen, J., 2018, Euro PM 2018 Congress and Exhibition. European Power Metallurgy Association EPMA, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Mikromekaniikka: Nykytila, haasteet & visiot

Jokinen, A., Koskinen, J., Kosonen, T., Saarinen, M., Salmi, T. & Väätäinen, O., 2004, VTT Technical Research Centre of Finland. 156 p. (VTT Tuotteet ja tuotanto. Tutkimusraportti; No. TUO27-033070).

Research output: Book/ReportReport

On the effect of shielding gas flow on porosity and melt pool geometry in laser powder bed fusion additive manufacturing

Reijonen, J., Revuelta, A., Riipinen, T., Ruusuvuori, K. & Puukko, P., Mar 2020, In : Additive Manufacturing. 32, 101030.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
1 Citation (Scopus)

Properties of soft magnetic Fe-Co-V alloy produced by laser powder bed fusion

Riipinen, T., Metsä-Kortelainen, S., Lindroos, T., Keränen, J., Manninen, A. & Pippuri-Mäkeläinen, J., 13 May 2019, In : Rapid Prototyping Journal. 25, 4, p. 699-707 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
3 Citations (Scopus)

Topology Optimization for Additive Manufacturing of Switched Reluctance Machines

Manninen, A., Keränen, J., Pippuri-Mäkeläinen, J., Metsä-Kortelainen, S., Lindroos, T. & Riipinen, T., 28 Oct 2018, (Submitted).

Research output: Contribution to conferenceConference articleScientificpeer-review

Topology Optimization of 3D Printed Switched Reluctance Motor

Manninen, A., Keränen, J., Pippuri-Mäkeläinen, J., Metsä-Kortelainen, S., Riipinen, T. & Lindroos, T., 10 Dec 2018, Proceedings of the NAFEMS Nordic Seminar.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsProfessional

Topology optimized soft magnetic cores by laser powder bed fusion

Riipinen, T., Pippuri-Mäkeläinen, J., Lindroos, T., Metsä-Kortelainen, S., Keränen, J. & Manninen, A., 2019, Euro PM2019 Congress Proceedings. USB ed. European Power Metallurgy Association EPMA, 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Wear of additively manufactured tool steel in contact with aluminium alloy

Huttunen-Saarivirta, E., Heino, V., Vaajoki, A., Hakala, T. J. & Ronkainen, H., 8 Jun 2019, In : Wear. 432-433, 202934.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)