Research Output

2020

Foam Forming under Dynamic Conditions

Lehmonen, J., Retulainen, E., Kraft, M., Paltakari, J. & Kinnunen-Raudaskoski, K., 2020, In : BioResources. 15, 3, p. 23

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
13 Downloads (Pure)

Fouling dynamics of SMUF on a plate heat exchanger

Jäsberg, A., Turpeinen, T., Tanaka, A., Ketola, A., Järvinen, M., Ojaniemi, U., Pättikangas, T. & Koponen, A., Jan 2020, Proceedings of International Conference on Heat Exchanger Fouling and Cleaning – 2019 (Peer-reviewed) . Zettler, H. (ed.). Heat Transfer Research, p. 322-328 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
2019

Unique compression behavior of foam-formed sheets in wet pressing and calendering

Järvinen, M., Pihko, R., Nurminen, I. & Ketoja, J., 8 May 2019, Proceedings of the International Paper Physics Conference (PaperCon 2019). TAPPI Press, p. 181-194

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Upscaling of foam forming technology for pilot scale

Lehmonen, J., Rantanen, T. & Kinnunen-Raudaskoski, K., 2019, In : Tappi Journal. 18, 8, p. 461-471

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)
2018

Density development in foam forming: Wet pressing dynamics

Järvinen, M., Pihko, R. & Ketoja, J. A., 26 Jul 2018, In : Nordic Pulp and Paper Research Journal. 33, 2, p. 226-236 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
2 Citations (Scopus)
2016

Interfacial Stabilization of Fiber-Laden Foams with Carboxymethylated Lignin toward Strong Nonwoven Networks

Li, S., Xiang, W., Järvinen, M., Lappalainen, T., Salminen, K. & Rojas, O. J., 2016, In : ACS Applied Materials & Interfaces. 8, 30, p. 19827-19835

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)
2015

Foam forming: Effects of different variables on fiber foam characteristics

Salminen, K., Lappalainen, T., Kiiskinen, H. T. & Sinkkonen, M., 2015, Paper Conference and Trade Show (PaperCon 2015). Curran Associates Inc., p. 1379-1389

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2014

Foam forming revisited: Part II. Effect of surfactant on the properties of foam-formed paper products

Lappalainen, T., Salminen, K., Kinnunen, K., Järvinen, M., Mira, I. & Andersson, M., 2014, In : Nordic Pulp and Paper Research Journal. 29, 4, p. 689-699 10 p.

Research output: Contribution to journalArticleScientificpeer-review

18 Citations (Scopus)
2013

Global energy consumption due to friction in paper machines

Holmberg, K., Siilasto, R., Laitinen, T., Andersson, P. & Jäsberg, A., 2013, In : Tribology International. 62, p. 58-77 20 p.

Research output: Contribution to journalArticleScientificpeer-review

45 Citations (Scopus)
2012

Laboratory scale investigation of foam forming

Lappalainen, T., Salminen, K., Kinnunen, K., Järvinen, M., Mira, I., Boge, L., Andersson, M. & Carlsson, G., 2012.

Research output: Contribution to conferenceConference PosterScientific

Spray application of biopolymers and tailored refining as tools in the production of formable paper material for novel applications

Vishtal, A., Retulainen, E., Vuoti, S. & Rantanen, T., 2012, NWBC 2012: The 4th Nordic Wood Biorefinery Conference, Helsinki, Finland, 23 - 25 October 2012. Niemelä, K. (ed.). Kuopio: VTT Technical Research Centre of Finland, p. 380-381 (VTT Technology; No. 53).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Open Access

The effects of guar gum on wet web runnability: Laboratory and pilot-scale studies

Salminen, K., Kataja-aho, J., Lindqvist, H., Retulainen, E., Rantanen, T. & Sundberg, A., 1 Dec 2012, Paper Conference and Trade Show 2012, PaperCon 2012: Growing the Future - Co-located with Control Systems 2012. Vol. 1. p. 473-482 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1 Citation (Scopus)

The effects of sequential polymer addition on wet- and dry-web mechanical characteristics: Laboratory, semi-pilot, and pilot studies

Kataja-aho, J., Salminen, K., Retulainen, E. & Rantanen, T., 2012, Proceedings of the Paper Conference and Trade Show, PaperCon 2012: Growing the Future . New Orleans, LA, USA: TAPPI Press, Vol. 1. p. 180-186

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2011

Improving wet web runnability and paper quality by an uncharged polysaccharide

Oksanen, A., Rantanen, T., Retulainen, E., Salminen, K. & Brumer, H., 2011, In : Journal of Biobased Materials and Bioenergy. 5, 2, p. 187-191 5 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

The effects of certain polymers on tensile strength and tension relaxation of wet web

Salminen, K., Kataja-Aho, J., Lindqvist, H., Retulainen, E., Rantanen, T. & Sundberg, A., Dec 2011, Paper Conference and Trade Show 2011: PaperCon 2011. Vol. 1. p. 431-438 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

3 Citations (Scopus)
2010

Improving recyclability of chemical pulp by introducing non-charged cross-linked polysaccharide on fiber surface

Oksanen, A., Retulainen, E., Rantanen, T. & Brumer, H., 2010, 2010 PEERS Conference and 9th Research Forum on Recycling Conference Proceedings: Norfolk, VA, 17-20 Oct. 2010. TAPPI Press, p. 59-87

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Improving wet web runnability and paper quality by an uncharged polysaccharide

Oksanen, A., Rantanen, T., Retulainen, E., Salminen, K. & Brumer, H., 2010, Research Progress in Paper Industry and Biorefinery. South China University of Technology, p. 1444-1447

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2004

600 MHz direct modulation of short external cavity wavelength-tunable diode laser

Heikkinen, V., Ollila, J., Rantanen, T., Vanhatalo, K. & Karioja, P., 2004, In : Electronics Letters. 40, 14, p. 871 - 872 2 p.

Research output: Contribution to journalArticleScientificpeer-review

2002

Optinen profilometri paperin karheuden mittauksessa: Jyväskylän Ammattikorkeakoulun opinnäytetyö

Translated title of the contribution: Optical profilometer in paper roughness measurements: Diploma Project of the Jyväskylä PolytechnicPöntynen, R., 2002, Jyväskylä. 47 p.

Research output: ThesisBachelor's thesis

Puupolttoaineen laadun ja tuotantotehokkuuden parantaminen haketustekniikkaa kehittämällä: PUUT18

Translated title of the contribution: Improving wood fuel quality and chipping capacity by developing the chipping techniqueSeppänen, V., Kaipainen, H., Kovanen, S. & Nikala, L., 2002, Puuenergian teknologiaohjelman vuosikirja 2002: Puuenergian teknologiaohjelman vuosiseminaari. Espoo: VTT Technical Research Centre of Finland, p. 189-204 (VTT Symposium; No. 221).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access
2001

Puupolttoaineen laadun ja tuotantotehokkuuden parantaminen haketustekniikkaa kehittämällä: PUUT18

Translated title of the contribution: Improving wood fuel quality and chipping capasity by developing chipping tehniqueSeppänen, V., Aalto, J., Kovanen, S., Nikala, L., Nousiainen, I., Salonen, J. & Vartiala, H., 2001, Puuenergian teknologiaohjelman vuosikirja 2001: Puuenergian teknologiaohjelman vuosiseminaari. Espoo: VTT Technical Research Centre of Finland, p. 329-341 (VTT Symposium; No. 216).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access
1993

Mineral-filled polypropylene manufactured by a twin-screw extruder

Järvelä, P., Minkkinen, H. & Rantanen, T., 1993.

Research output: Contribution to conferenceConference PosterScientific

The comparison of fatigue loading and dynamic mechanical properties of plastic composites

Rantanen, T., Järvelä, P. & Minkkinen, H., 1993, p. M-12.

Research output: Contribution to conferenceConference articleScientific

The effect of physical damage on dynamic mechanical properties of composites

Rantanen, T., Järvelä, P. & Minkkinen, H., 1993.

Research output: Contribution to conferenceConference PosterScientific

1992

Dynamic mechanical properties of plastic composites measured by DMTA technique

Järvelä, P., Rantanen, T. & Minkkinen, H., 1992, Textiles and composites '92. Espoo: VTT Technical Research Centre of Finland, p. 132-137 (VTT Symposium; No. 133).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1991

A fatigue testing device for composites based on compression bending

Minkkinen, H., Rantanen, T. & Parviainen, H., 1991, p. 229-232.

Research output: Contribution to conferenceConference articleScientific

1990

DMTA-laitteiston käyttöalueet muovien tutkimuksessa

Rantanen, T., 1990. 6 p.

Research output: Contribution to conferenceConference articleProfessional

Effect of weathering on dynamic mechanical properties of composites

Rantanen, T., Järvelä, P. & Järvelä, P., 1990.

Research output: Contribution to conferenceConference PosterScientific

Rakenteen vaikutus muovikomposiitin dynaamisiin mekaanisiin ominaisuuksiin

Translated title of the contribution: Effect of struck on dynamic technical properties of compositesRantanen, T., Järvelä, P. & Järvelä, P., 1990, Espoo. 42 p. (Valtion teknillinen tutkimuskeskus. Tiedotteita; No. 1186).

Research output: Book/ReportReport

1989

Composites testing by dynamic mechanical thermal analyser

Järvelä, P., Rantanen, T. & Järvelä, P., 1989.

Research output: Contribution to conferenceConference PosterScientific

Muovien tunnistaminen: Luentotiivistelmä

Rantanen, T., 1989. 8 p.

Research output: Contribution to conferenceConference articleProfessional

Muovien tunnistaminen yksinkertaisin välinein

Pääkkönen, E. & Rantanen, T., 1989, In : Laborantti. 4

Research output: Contribution to journalArticleProfessional

Muovimateriaalit (muovipinnoitteet)

Rantanen, T., 1989, Muovit laivaputkistoissa ja kattilajärjestelmien korroosio: Koulutusjulkaisu. Rauma, 20 p.

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Viskoelastisen materiaalin dynaamiset mekaaniset ominaisuudet: Kirjallisuustutkimus

Rantanen, T. & Järvelä, P., 1989, Espoo: VTT Technical Research Centre of Finland. 38 p. (Valtion teknillinen tutkimuskeskus. Tiedotteita; No. 934).

Research output: Book/ReportReport

Weather and heat durability of polypropylene compunds

Järvelä, P., Rantanen, T. & Järvelä, P., 1989, p. 3-19.

Research output: Contribution to conferenceConference articleScientific