CO1 Commercial Operations

Research Output 1990 2019

2009
14 Citations (Scopus)

Effects of commercial cellobiohydrolase treatment on fiber strength and morphology of bleached hardwood pulp

Suchy, M., Hakala, T., Kangas, H., Kontturi, E., Tammelin, T., Pursula, T. & Vuorinen, T., 2009, In : Holzforschung. 63, 6, p. 731-736 6 p.

Research output: Contribution to journalArticleScientificpeer-review

Cellulose 1,4-beta-Cellobiosidase
Hardwoods
Pulp
Fibers
Scanning electron microscopy
6 Citations (Scopus)

Evaluation of printed electronics manufacturing line with sensor platform application

Halonen, E., Kaija, K., Mäntysalo, M., Kemppainen, A., Osterbacka, R. & Björklund, N., 2009, 2009 European Microelectronics and Packaging Conference. IEEE Institute of Electrical and Electronic Engineers

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Printing
Electronic equipment
Sensors
Ink
Throughput

Experiences on the integration of automation CAE and process simulation tools: Case FupRos

Paljakka, M., Talsi, J. & Olia, H., 2009, Automaatio XVIII. Helsinki, (Suomen automaatioseura. Julkaisusarja; No. 36).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Computer aided engineering
Automation
Computer simulation

Impregnation efficiency studies of dextran and cellulase on Norway spruce chips aiming at reduced energy consumption in TMP refining

Liukkonen, S., Blomstedt, M., Nyman, K., Hakala, T. & Pere, J., 2009, Proceedings of the 2009 International Mechanical Pulping Conference, IMPC 2009. Stockholm, p. 325-329 (SPCI-meddelande; No. 79).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

9 Citations (Scopus)

Inkjet print quality: The role of polyvinyl alcohol in speciality CaCO3 coatings

Lamminmäki, T., Kettle, J., Puukko, P., Gane, P. & Ridgway, C., 2009, In : Journal of Pulp and Paper Science. 35, 3-4, p. 137-147 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Polyvinyl Alcohol
Polyvinyl alcohols
Pore structure
Coatings
Binders

Inkjet print quality: The role of polyvinyl alcohol in speciality CaCO3 coatings

Lamminmäki, T., Kettle, J., Puukko, P., Ridgeway, C. & Gane, P. A. C., 2009, Preprint - 7th International Paper and Coating Chemistry Symposium, . p. 195-207

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access

Java Implementation of OPC Unified Architecture

Paljakka, M., Kalajainen, T., Aro, J., Hannelius, T., Salonen, E., Suihkonen, K., Salmenperä, M., Salonen, M. & Seilonen, I., 2009, Automaatio XVIII Seminaari 2009. Helsinki, 6 p. (Suomen automaatioseura. Julkaisusarja; No. 36).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Servers
Automation

Kehittämisen painopiste ja kasvu ovat paikkasidonnaisissa palveluissa

Kiviniemi, J., 2009, In : GT-lehti. 4, p. 6-7

Research output: Contribution to journalArticleProfessional

Large area printed sensors: System and manufacturing integration

Kemppainen, A., Kopola, H., Maaninen, A., Tukkiniemi, K., Sumén, J., Hast, J., Koskinen, J. & Laakso, P., 2009, Plastic Electronics Europe 2009.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Sensors
Microelectronics
Electronic equipment
Display devices
Antennas

Large area printed smart systems: From components to systems

Kemppainen, A., Kopola, H., Korhonen, R., Alastalo, A., Maaninen, A., Tuomikoski, M., Hast, J. & Laakso, P., 2009.

Research output: Contribution to conferenceConference articleScientific

Microelectronics
Electronic equipment
Systems analysis
Display devices
Antennas
11 Citations (Scopus)

Negative differential resistance in polymeric memory devices containing disordered block copolymers with semiconducting block

Vilkman, M., Solehmainen, K., Laiho, A., Sandberg, H. & Ikkala, O., 2009, In : Organic Electronics. 10, 8, p. 1478-1482 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Polystyrenes
block copolymers
Block copolymers
polystyrene
Data storage equipment

Printable polyaniline based thin film batteries

Jussila, S., Valkiainen, M. & Solehmainen, K., 2009, Book of Abstracts: 2nd International Symposium on Flexible Organic Electronics, IS-FOE09. Halkidiki, Greece, 130

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

SEFRAM Service Framework for Process Industry Information Exchange

Paljakka, M., Söderman, J., Karaila, M., Syrjänen, T., Uusitalo, M. & Heikkilä, H., 2009, Automaatio XVIII Seminaari 17.-18.3.2009. Ketonen, M. (ed.). Helsinki

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Information exchange
Process industry
Information management
Industry
Readiness
14 Citations (Scopus)

Sintering of printed nanoparticle structures using laser treatment

Laakso, P., Ruotsalainen, S., Halonen, E., Mäntysalo, M. & Kemppainen, A., 2009, Proceedings of ICALEO 2009: 28th International Congress on Applications of Lasers and Electro-Optics. Orlando: Laser Institute of America, p. 1360-1366

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

sintering
nanoparticles
lasers
conductivity
printers

Sintering of printed nanoparticle structures using laser treatment

Laakso, P., Ruotsalainen, S., Halonen, E., Kemppainen, A. & Mäntysalo, M., 2009, Fifth International WLT-Conference on Lasers in Manufacturing, LIM, Munich 15.-18.6.2009. Stuttgart, p. 527-532

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Teräspalvelutoiminnan tulevaisuus Suomessa

Poikkimäki, J., Valkokari, K. & Anttila, J-P., 2009, Espoo: VTT Technical Research Centre of Finland. 74 p. (VTT Tiedotteita - Research Notes; No. 2510).

Research output: Book/ReportReport

Open Access

The Role of Binder Type in Defining Inkjet Print Quality

Lamminmäki, T., Kettle, J., Puukko, P., Ketoja, J. & Gane, P., 2009.

Research output: Contribution to conferenceConference articleScientific

Open Access

Towards zero emission energy production: VTT Intelligence Forum 2009

Lind, I. (ed.), Ernvall, O. (ed.) & Halme, S. (ed.), 2009, Espoo: VTT Technical Research Centre of Finland. 97 p. (VTT Symposium; No. 254).

Research output: Book/ReportBook (editor)

Open Access

Transcript analysis with the aid of affinity capture and gel electrophoresis on microchips

Amundsen, L., Del Bueno, N., Rautio, J., Iljin, K., Nees, M., Ketola, K., Sirkiä, M., Saviranta, P., Kotimaa, J., Pakanen, M., Siitari, H., Söderlund, H. & Mathies, R. A., 2009.

Research output: Contribution to conferenceConference articleScientific

Electrophoresis
Gels
Cells
Messenger RNA
Genes
18 Citations (Scopus)

Unobtrusive dynamic modelling of TV programme preferences in a Finnish household

Vildjiounaite, E., Kyllönen, V., Hannula, T. & Alahuhta, P., 2009, In : Multimedia Systems. 15, 3, p. 143 - 157 15 p.

Research output: Contribution to journalArticleScientificpeer-review

Metadata
Learning systems
Classifiers
Recommender systems
Merging
5 Citations (Scopus)

Wideband adaptive isolator for UHF RFID reader

Pursula, P., Marttila, I. & Nummila, K., 2009, In : Electronics Letters. 45, 12, p. 636-637 2 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
Radio frequency identification (RFID)
Antennas
Adaptive systems
Transceivers
2010

Accounting for coupled deterioration mechanisms when designing durable concrete containing mineral by-products

Holt, E., Kuosa, H., Leivo, M., Al-Neshawy, F., Piironen, J. & Sistonen, E., 2010, Sustainable construction materials and technologies: Second International Conference on Sustainable Construction Materials and Technologies, 28-30 June 2010, Ancona Italy (Volumes 1-3). Zachar, J., Claisse, P., Naik, T. & Ganjian, E. (eds.). Milwaukee, Wisconsin, USA, p. 1631-1642

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Carbonation
Byproducts
Deterioration
Sustainable development
Durability
68 Citations (Scopus)

A review of modified surfaces for high speed inkjet coating

Kettle, J., Lamminmäki, T. & Gane, P., 2010, In : Surface and Coatings Technology. 204, 12-13, p. 2103-2109 7 p.

Research output: Contribution to journalArticleScientificpeer-review

inks
Ink
high speed
coatings
Coatings

A role for the COMPASS complex as determinant of brewing yeast fermentation performance

Gibson, B., Rautio, J., Huuskonen, A., Vuokko, H. & Londesborough, J., 2010.

Research output: Contribution to conferenceConference articleScientific

Automaatio liiketoimintaprosessien tukena

Ylén, J-P., Ventä, O., Tommila, T., Lappalainen, J., Hirvonen, J., Karhela, T., Paljakka, M., Lehtinen, H., Heilala, J., Peltonen, J., Malm, T., Valkonen, J., Voho, P. & Savioja, P., 2010, Helsinki: TEKES. 112 p. (Tekesin katsaus, Vol. 271).

Research output: Book/ReportReport

2 Citations (Scopus)

Characterization of curtain coating colors

Kokko, A., Kettle, J., Rautkoski, H. & Shen, Y., 2010, TAPPI 11th Advanced Coating Fundamentals Symposium: The Latest Advances in Coating Research and Development. Munich, Germany, 11-13 Oct. 2010. TAPPI Press, p. 436-454

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Color
Coatings
Surface tension
Viscosity
Air entrainment
2 Citations (Scopus)

Effect of printing parameters on delamination of board in sheet fed offset printing

Vähä-Nissi, M., Kela, L., Kulachenko, A., Puukko, P. & Kariniemi, M., 2010, In : Appita Journal. 63, 4, p. 315 - 322

Research output: Contribution to journalArticleScientificpeer-review

Offset printing
Delamination
Printing
Ink
Printing presses

Effect of xylanase and endoglucanase treatment on dewatering properties of birch kraft pulp

Hakala, T., Blomstedt, M., Lähdeniemi, A., Asikainen, J., Ylönen, T. & Paltakari, J., 2010, Lignobiotech One Symposium: 1st Symposium on Biotechnology Applied to Lignocelluloses : March 28th - April 1st 2010, Reims, France. Presses universitaires de Reims, 74

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

kraft pulp
dewatering
xylanases
Betula
endo-1,4-beta-glucanase
16 Citations (Scopus)

Effect of xylanase treatment on dewatering properties of birch kraft pulp

Blomstedt, M., Asikainen, J., Lähdeniemi, A., Ylönen, T., Paltakari, J. & Hakala, T., 2010, In : BioResources. 5, 2, p. 1164-1177 14 p.

Research output: Contribution to journalArticleScientificpeer-review

Kraft pulp
Dewatering
dewatering
Pulp
Xylans

Electrical Sintering of Conductor Grids for Optoelectronic Devices

Allen, M., Suhonen, M., Leppäniemi, J., Alastalo, A., Mattila, T., Kemppainen, A. & Seppä, H., 2010, Proceedings of LOPE-C 2010.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Optoelectronic devices
Sintering
Printing
Substrates
Ovens

Enzyme-assisted extraction of hemicelluloses and lignin from organosolv pulps

Hakala, T., Hyvärinen, S., Liitiä, T. & Suurnäkki, A., 2010, Proceedings of 11th European Workshop on Lignocellulosics and Pulp: Proceedings. p. 153-157

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

hemicellulose
pulp
lignin
enzymatic treatment
enzymes
44 Citations (Scopus)

Finger friction measurements on coated and uncoated printing papers

Skedung, L., Danerlöv, K., Olofsson, U., Aikala, M., Niemi, K., Kettle, J. & Rutland, M. W., 2010, In : Tribology Letters. 37, 2, p. 389-399 11 p.

Research output: Contribution to journalArticleScientificpeer-review

friction measurement
printing
Printing
Friction
coefficient of friction
4 Citations (Scopus)

Indium-tin bump deposition for the hybridization of CdTe sensors and readout chips

Heikkinen, H., Gädda, A., Salonen, J., Monnoyer, P., Tlustos, L. & Campbell, M., 2010, Proceedings: IEEE Nuclear Science Symposuim & Medical Imaging Conference, NSSMIC 2010. IEEE Institute of Electrical and Electronic Engineers , p. 3891-3895

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Soldering alloys
Indium
Tin
Sensors
Melting point
2 Citations (Scopus)

Influence of ink chemistry and surface energy on flexographic print quality

Luu, W. T., Bousfield, D. W., Kettle, J. & Aspler, J., 2010, TAPPI 11th Advanced Coating Fundamentals Symposium: The Latest Advances in Coating Research and Development. Munich, Germany, 11-13 Oct. 2010. TAPPI Press, p. 309-332

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Interfacial energy
Ink
Dimers
2-Propanol
Printing

Influence of ink chemistry and uncoated paper surface energy on setting and transfer of water-based flexographic inks

Luu, W. T., Bousfield, D. W. & Kettle, J., 2010, Paper Conference and Trade Show 2010 (PaperCon 2010): Atlanta, Georgia, USA, 2-5 May 2010. TAPPI Press, Vol. 4. p. 3212-3253

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Interfacial energy
Ink
Water
Binders
Newsprint

Model checking methodology for verification of safety logics

Valkonen, J., Björkman, K., Frits, J. & Niemelä, I., 2010, Proceedings of the 6th International Conference on Safety of Industrial Automated Systems, SIAS 2010.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Model checking
Logic design
Formal methods
Programmable logic controllers
Systems analysis

Multi-scale modeling environment for nanocellulose applications

Ketoja, J., Hellén, E. K. O., Lappalainen, J., Kulachenko, A., Puisto, A., Alava, M., Penttilä, A., Lumme, K., Paavilainen, S., Róg, T., Vattulainen, I., Vidal, D. & Uesaka, T., Dec 2010, International Conference on Nanotechnology for the Forest Products Industry 2010. TAPPI Press, p. 731-758 28 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

9 Citations (Scopus)

Nanofibrillar cellulose: In vitro study of cytotoxic and genotoxic properties

Pitkänen, M., Honkalampi, U., Von Wright, A., Sneck, A., Hentze, H-P., Sievänen, J., Hiltunen, J. & Hellen, E., 2010, Proceedings of the 2010 International Conferene on Nanotechnology for the Forest Products Industry. TAPPI Press, p. 246-261

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
nanomaterials
in vitro studies
cellulose
toxicity testing

Nano-particle products from new mineral resources in Europe: EU FP7 Project "ProMine"

Sarlin, J., Harlin, A., Teir, S., Räsänen, L. & Kettle, J., 2010, International Conference on Nanotechnology for the Forest Products Industry 2010. TAPPI Press, p. 838-864

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Onko Suomessa ongelmaa nimeltä alkali-kiviainesreaktio?

Translated title of the contribution: Does Finland have an Alkali-Aggregate Reaction Problem?Pyy, H. & Holt, E., 2010, In : Betoni. 80, 4, p. 46-48

Research output: Contribution to journalArticleProfessional

Printable, organic, and large-area realisation of integrated circuits

Solehmainen, K., 2010, Plastic Electronics Conference & Exhibition 2010 Programme and Abstracts: Programme and Abstracts. Dresden, Germany

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Integrated circuits
Printing
Transistors
Thin film circuits
Fabrication

Printable polyaniline-aluminum thin film batteries

Jussila, S., Valkiainen, M., Solehmainen, K. & Kielosto, S., 2010, Proceedings of the 44. Annual Conference of the Finnish Physical Society. Jyväskylä, Finland: University of Jyväskylä, p. 35 (University of Jyväskylä: Department of Physics. Research Report; No. 3/2010).

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Open Access
18 Citations (Scopus)

Probing material properties of polymeric surface layers with tapping mode AFM: Which cantilever spring constant, tapping amplitude and amplitude set point gives good image contrast and minimal surface damage?

Thormann, E., Pettersson, T., Kettle, J. & Claesson, P. M., 2010, In : Ultramicroscopy. 110, 4, p. 313-319 7 p.

Research output: Contribution to journalArticleScientificpeer-review

minimal surfaces
image contrast
Materials properties
surface layers
atomic force microscopy
65 Citations (Scopus)

Tactile perception: Finger friction, surface roughness and perceived coarseness

Skedung, L., Danerlöv, K., Olofsson, U., Johannesson, C. M., Aikala, M., Kettle, J., Arvidsson, M., Berglund, B. & Rutland, M. W., 2010, In : Tribology International. 44, 5, p. 505-512 8 p.

Research output: Contribution to journalArticleScientificpeer-review

coarseness
coefficient of friction
surface roughness
friction
Surface roughness

Teräs kiiltää ja kaakelit hohtavat: VTT uudisti elintarvikepilothallinsa

Bergqvist, P. & Sibakov, J., 2010, In : Mallas ja Olut. 1, p. 21-23

Research output: Contribution to journalArticleProfessional

The challenges of high-speed inkjet printing in the offset world

Lamminmäki, T., Rautkoski, H., Kokko, A. & Kettle, J., 2010, Advances in Printing and Media Technology: Proceedings of the 37th International Research Conference of iarigai . IARIGAI - International Association of Research Organizations for the Printing, Information and Communication Industries, Vol. XXXVII. p. 73-82

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
Printing
Ink
Coatings
Offset printing
Color printing
19 Citations (Scopus)

The role of binder type in determining inkjet print quality

Lamminmäki, T., Kettle, J., Puukko, P., Ketoja, J. & Gane, P., 2010, In : Nordic Pulp and Paper Research Journal. 25, 3, p. 380-390 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Ink
coatings
Binders
coating
styrene
3 Citations (Scopus)

The role of ink component diffusion during absorption into inkjet coatings

Lamminmäki, T., Kettle, J., Puukko, P., Ridgway, C. J. & Gane, P. A. C., 2010, TAPPI 11th Advanced Coating Fundamentals Symposium: The Latest Advances in Coating Research and Development. Munich, Germany, 11-13 Oct. 2010. TAPPI Press, p. 195-214

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Ink
Binders
Coatings
Swelling
Liquids

Toward roll-to-roll printed power sources and control electronics

Hast, J., Solehmainen, K. & Vilkman, M., 2010, In : Photonics Spectra. 44, 6

Research output: Contribution to journalArticleScientificpeer-review