CO1 Commercial Operations

Research Output 1990 2019

2013
23 Citations (Scopus)

Printed half-wave and full-wave rectifier circuits based on organic diodes

Heljo, P. S., Li, M., Lilja, K. E., Majumdar, H. & Lupo, D., 2013, In : IEEE Transactions on Electron Devices. 60, 2, p. 870-874 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Diodes
Networks (circuits)
Electric potential
Rectifying circuits
Electronic equipment

Realisation of the potential in the forest industry sector through innovation, technology and commercialisation

Roos, G., Kettle, J. & Vanderhoek, N., 2013, In : Appita Journal. 66, 2, p. 82-83 2 p.

Research output: Contribution to journalArticleScientific

Realisation of the potential in the forest industry sector through innovation, technology and commercialisation: Case study the Green Triangle

Ahlqvist, T., Roos, G., Kettle, J. & Vanderhoek, N., 2013.

Research output: Contribution to conferenceOther conference contributionScientific

commercialization
innovation
industry
forest product
transform
3 Citations (Scopus)

Reliability of wafer-level SLID bonds for MEMS encapsulation

Xu, H., Broas, M., Dong, H., Vuorinen, V., Suni, T., Vähänen, S., Monnoyer, P. & Paulasto-Krockel, M., 2013, 2013 European Microelectronics Packaging Conference (EMPC). Grenoble: Institute of Electrical and Electronic Engineers IEEE, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

microelectromechanical systems
sealing
wafers
vacuum
silicon
7 Citations (Scopus)

Road surface condition detection using 24 GHz automotive radar technology

Häkli, J., Säily, J., Koivisto, P., Huhtinen, I., Dufva, T., Rautiainen, A., Toivanen, H. & Nummila, K., 2013, Proceedings International Radar Symposium, IRS 2013. Institute of Electrical and Electronic Engineers IEEE, p. 702-707

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Radar
Asphalt
Backscattering
Telecommunication traffic
Friction

Screening of ALD thin films for Cu diffusion barrier applications

Puurunen, R. L., Salonen, J., Nurmela, A., Ylivaara, O., Viljanen, H., Molarius, J., Monnoyer, P., Yliniemi, S., Pudas, M., Lehto, T., Lehto, T. & Li, W-M., 2013, Technical Program & Abstracts. American Vacuum Society AVS

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

4 Citations (Scopus)

Silica pigment produced from silicate mining sidestreams for ink-jet paper coating application

Kenttä, E., Lamminmäki, T., Rautkoski, H., Teir, S., Bacher, J., Kettle, J. & Sarlin, J., 2013, In : Nordic Pulp and Paper Research Journal. 28, 1, p. 22-27 6 p.

Research output: Contribution to journalArticleScientificpeer-review

air transportation
Silicates
Coating techniques
silicates
Ink

South Australian Cellulosic Value Chain Technology Roadmap Stage 1: Assessment of the present state and future potential of forest industry in Mt Gambier region, South Australia

Ahlqvist, T., Vanderhoek, N., Dufva, M., Kettle, J., Valovirta, V., Kivimaa, A. & Loikkanen, T., 2013, VTT Technical Research Centre of Finland. 59 p. (VTT Customer Report; No. VTT-CR-02233-13).

Research output: Book/ReportReport

Open Access
bioenergy
forestry
limestone
coast
industry

Strategic roadmapping, industry renewal, and cluster creation: Case Green Triangle

Ahlqvist, T., Dufva, M., Kettle, J., Vanderhoek, N., Hytönen, E., Niemelä, K., Kivimaa, A., Valovirta, V. & Loikkanen, T., 2013, Proceedings: 6th ISPIM Innovation Symposium: Innovation In The Asian Century. Worsley, Manchester, UK: International Society for Professional Innovation Management ISPIM

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Roadmapping
Industry
Renewal
Pathway
Management of innovation

Supporting renewable energy business innovation - identifying system delivery network's synergies

Jussila, A. & Ryynänen, T., 2013, Proceedings of 6th ISPIM Innovation Symposium: Innovation in the Asian century. International Society for Professional Innovation Management ISPIM

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Innovation
Industry
Life cycle
Costs

The shift from traditional printing to inkjet printing: What should be taken into account?

Kela, L., Lamminmäki, T., Pitkänen, M., Heilmann, J., Rusko, E. & Mensonen, A., 2013.

Research output: Contribution to conferenceConference articleProfessional

Printing
Ink
Substrates
Textile printing
Biotechnology
5 Citations (Scopus)

Wafer-Level AuSn and CuSn Bonding for MEMS Encapsulation

Suni, T., Xu, H., Vuorinen, V., Heikkinen, H., Vähänen, S., Jaakkola, A., Monnoyer, P. & Paulasto-Kröckel, M., 2013, 2013 European Microelectronics Packaging Conference (EMPC). Grenoble: Institute of Electrical and Electronic Engineers IEEE

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Encapsulation
MEMS
Interdiffusion (solids)
Seals
Liquids

Wafer level MEMS encapsulation using SLID bonding

Suni, T., Xu, H., Heikkinen, H., Dekker, J., Vuorinen, V., Jaakkola, A., Monnoyer, P. & Paulasto-Kröckel, M., 2013, Book of abstracts. Stockholm, p. 105-106

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Encapsulation
MEMS
Tin
Interdiffusion (solids)
Electroplating
22 Citations (Scopus)

Wafer-level SLID bonding for MEMS encapsulation

Xu, H., Suni, T., Vuorinen, V., Li, J., Heikkinen, H., Monnoyer, P. & Paulasto-Kröckel, M., 2013, In : Advances in Manufacturing. 1, 3, p. 226- 235 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Interdiffusion (solids)
Encapsulation
Microelectronics
Liquids
Metals
2012

A Management Accounting Perspective on Safety

Tappura, S., Sievänen, M., Jussila, A., Heikkilä, J. & Nenonen, N., 2012, Proceedings of the 6th International Conference of Working on Safety Network: Towards Safety Through Advanced Solutions. Warsaw, p. 76 - 77

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Assessing the extent of AAR in Finland

Pyy, H., Ferreira, M. & Holt, E., 2012, 14th ICAAR 2012,14th International Conference on Alkali-Aggregate Reaction. University of Texas at Austin, 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Deterioration
Concretes
Geology
Alkalinity
Service life

Betonin säilyvyyden kenttätutkimukset: Merkitys ja tuloksia

Translated title of the contribution: Field testing research of concrete: Significance and resultsKuosa, H. & Holt, E., 2012, In : Betoni. 1, p. 46-49 4 p.

Research output: Contribution to journalArticleProfessional

Open Access
testing

Concrete durability based on coupled deterioration by frost, carbonation and chloride

Kuosa, H., Ferreira, M. & Holt, E., 2012, ICDC 2012, International Congress on Durability of Concrete, Trondheim, Norway, 18-21 June 2012: Book of abstracts and proceedings. Trondheim, Norway: Norsk Betongforening, 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Carbonation
Deterioration
Durability
Concretes
Service life
43 Citations (Scopus)

Disposable roll-to-roll hot embossed electrophoresis chip for detection of antibiotic resistance gene mecA in bacteria

Liedert, R., Amundsen, L., Hokkanen, A., Mäki, M., Aittakorpi, A., Pakanen, M., Schrerer, J. R., Mathies, R. A., Kurkinen, M., Uusitalo, S., Hakalahti, L., Nevanen, T., Siitari, H. & Söderlund, H., 2012, In : Lab on a Chip. 12, 2, p. 333-339 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Microfluidics
Antibiotics
Lab-On-A-Chip Devices
Microbial Drug Resistance
Electrophoresis

Effect of chlorides on moisture content and sorption isotherms

Leivo, M., Kuosa, H., Holt, E., Vesikari, E. & Ferreira, R. M., 2012, Concrete Repair, Rehabilitation and Retrofitting III: Proceedings of the 3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR 2012. p. 358-363

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2 Citations (Scopus)

Effect of varying surface ageing on frost-salt scaling

Kuosa, H., Leivo, M., Holt, E. & Ferreira, R. M., 2012, Bridge Maintenance, Safety, Management, Resilience and Sustainability: Proceedings of the Sixth International IABMAS Conference, Stresa, Lake Maggiore, Italy, 8-12 July 2012. Biondini, F. & Frangopol, D. M. (eds.). CRC Press, p. 974-981

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Aging of materials
Salts
Carbonation
Concretes
Service life

Enzyme-aided analysis of galactoglucomannan (GGM) isolated from pine wood chips by hot water extraction

Mikkelson, A., Hyvärinen, S., Tamminen, T. & Hakala, T., 2012, 12th European Workshop on Lignocellulosics and Pulp: EWLP 2012 : August 27-30, 2012, Espoo, Finland : Proceedings. Mäkelä, V. (ed.). Helsinki: University of Helsinki, p. 378-381

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

wood chips
oligosaccharides
Pinus
xylan
enzymatic hydrolysis
11 Citations (Scopus)

Fabrication and electrical characterization of high aspect ratio poly-silicon filled through-silicon vias

Dixit, P., Vehmas, T., Vähänen, S., Monnoyer, P. & Henttinen, K., 2012, In : Journal of Micromechanics and Microengineering. 22, 5, 9 p., 055021.

Research output: Contribution to journalArticleScientificpeer-review

Acoustic impedance
Silicon
Aspect ratio
Stadiums
Polysilicon

Fiber-based substrate for printed electronics

Torvinen, K., Sievänen, J., Hjelt, T. & Hellen, E., 2012, In : Paperi ja puu. 1

Research output: Contribution to journalArticleProfessional

Flexible bio-based pigment nanocellulose substrate for printed electronics

Torvinen, K., Sievänen, J., Mattila, T., Alastalo, A. & Hellen, E., 2012.

Research output: Contribution to conferenceConference articleScientific

Pigments
Electronic equipment
Substrates
Plastics
Dimensional stability

Growing inks from trees

Kela, L., Ilmonen, A., Jokiaho, K. & Harlin, A., 2012, In : European Coatings Journal. 11, p. 5-8 3 p.

Research output: Contribution to journalArticleScientific

Ink
Byproducts
Pulp
Printing
Packaging

Hemicellulose and lignin fractions obtained by hot water extraction and organosolv cooking of Scots pine

Hyvärinen, S., Hakala, T., Tamminen, T., Ohra-aho, T., Liitiä, T. & Suurnäkki, A., 2012, 12th European Workshop on Lignocellulosics and Pulp: EWLP 2012 : August 27-30, 2012, Espoo, Finland : Proceedings. Helsinki: University of Helsinki, p. 288-291

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

hemicellulose
Pinus sylvestris
cooking
lignin
water

Improving flood forecasting using multi-source remote sensing data together with in situ measurements: Report of the Floodfore project

Kolhinen, V. (ed.), Metsämäki, S. (ed.), Vehviläinen, B. (ed.), Kuitunen, T. (ed.), Lemmetyinen, J. (ed.), Pulliainen, J. (ed.), Rautiainen, K. (ed.), Smolander, T. (ed.), Antropov, O. (ed.), Berglund, R. (ed.), Kiviniemi, J. (ed.), Rauste, Y. (ed.) & Kärnä, J-P., 2012, Helsinki. 47 p. (Finnish Environment; No. 12, Vol. 2012).

Research output: Book/ReportReport

flood forecasting
in situ measurement
snow water equivalent
remote sensing
microwave radiometer

Maltoosin ja maltotrioosin kuljetus- ja metaboliageenien transkription vertailu hybridi Sacchamoryces pastorianus -panimokannassa suhteessa geenien alkuperään

Vidgren, V., Londesborough, J., Rautio, J., Mattinen, L. & Gibson, B., 2012, In : Mallas ja Olut. 78, 3, p. 76-86 11 p.

Research output: Contribution to journalArticleProfessional

MegaCentre Planning Project

Pykälä, M-L., Lehtomäki, V., Kansola, M., Valkokari, K., Holttinen, H., Peltola, E. & Siljander, A., 2012, Espoo: VTT Technical Research Centre of Finland. 72 p. (VTT Technology; No. 37).

Research output: Book/ReportReport

Open Access
Planning
Wind power
Industry
Wind turbines

Modeling of the underfill flow process in the flip chip bonded pixel detectors

Gädda, A., Salonen, J., Vähänen, S., Monnoyer, P., Heikkinen, H., Pohjonen, H. & Eränen, S., 2012, Proceedings: IMAPS Nordic Conference 2012. Kutilainen, J. (ed.). p. 82-85

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Computational methods
Pixels
Detectors
Polymers
Epoxy resins

Ohralajikkeen, dormanssin ja kasvuolojen vaikutuksia geenien ilmentymiseen sekä ohran prosessoitavuuteen tutkittiin IMRO-projektissa

Wilhelmson, A., Sarlin, T., Laitila, A., Ritala, A., Schulman, A., Gillberg, J., Suvitaival, T., Rautio, J., Manninen, O. & Reinikainen, P., 2012, In : Mallas ja Olut. 78, 4, p. 116-120 5 p.

Research output: Contribution to journalArticleProfessional

16 Citations (Scopus)

On the origin of decay of spin current with temperature in organic spintronic devices

Majumdar, S. & Majumdar, H., 2012, In : Organic Electronics. 13, 11, p. 2653-2658 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Magnetoelectronics
Semiconducting organic compounds
organic semiconductors
decay
Giant magnetoresistance

Optimization of Lignofiber (LGF) organosolv process for fractionation of lignocellulosics

Kangas, H., Hakala, T., Hyvärinen, S. & Määttänen, M., 2012, 12th European Workshop on Lignocellulosics and Pulp: EWLP 2012 : August 27-30, 2012, Espoo, Finland : Proceedings. Mäkelä, V. (ed.). Helsinki: University of Helsinki, p. 312-315

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Fractionation
Lignin
Pulp
Pulp cooking
Recovery

Packaging barriers from renewable sources

Hartman, J., 2012, Research highlights in industrial biomaterials. Espoo: VTT Technical Research Centre of Finland, p. 52-58 (VTT Research Highlights; No. 2).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access
4 Citations (Scopus)

Printed hybrid systems

Karioja, P., Mäkinen, J-T., Keränen, K., Aikio, J., Alajoki, T., Jaakola, T., Koponen, M., Keränen, A., Heikkinen, M., Tuomikoski, M., Suhonen, R., Hakalahti, L., Kopola, P., Hast, J., Liedert, R., Hiltunen, J., Masuda, N., Kemppainen, A., Rönkä, K. & Korhonen, R., 2012, Proceedings of SPIE: Nanosensors, Biosensors, and Info-Tech Sensors and Systems 2012. Varadan, V. K. (ed.). International Society for Optics and Photonics SPIE, 13 p. 83440G. (Proceedings of SPIE, Vol. 8344).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Hybrid systems
Electronic equipment
Injection molding
Polymers
Medical applications

Role of process gases in making tapered through-silicon vias for 3D MEMS packaging

Dixit, P., Vähänen, S., Salonen, J. & Monnoyer, P., 2012, Proceedings: 7th International Microsystems, Packaging, Assembly and Circuits Technology Conference, IMPACT 2012. Institute of Electrical and Electronic Engineers IEEE, p. 35-38

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

MEMS
Etching
Packaging
Passivation
Silicon
15 Citations (Scopus)

Short timescale inkjet ink component diffusion: An active part of the absorption mechanism into inkjet coatings

Lamminmäki, T., Kettle, J., Puukko, P., Ridgway, C. J. & Gane, P. A. C., 2012, In : Journal of Colloid and Interface Science. 365, 1, p. 222-235 14 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
Latex
Latexes
Ink
Polyvinyl Alcohol
Styrene

Silica pigment produced from silicate mining sidestreams for ink-jet paper coating application

Kenttä, E., Lamminmäki, T., Rautkoski, H., Teir, S., Bacher, J., Kettle, J. & Sarlin, J., 2012, 8th International Paper and Coating Chemistry Symposium, IPCCS 2012: Book of Abstracts. p. 78-80

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

46 Citations (Scopus)

Smooth and flexible filler-nanocellulose composite structure for printed electronics applications

Torvinen, K., Sievänen, J., Hjelt, T. & Hellen, E., 2012, In : Cellulose. 19, 3, p. 821-829 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Dimensional stability
Composite structures
Calendering
Kaolin
Fillers

Some xylan ethers for coating applications

Laine, C., Harlin, A., Hartman, J., Hyvärinen, S., Kammiovirta, K., Krogerus, B., Pajari, H., Rautkoski, H., Setälä, H., Sievänen, J., Uotila, J. & Vähä-Nissi, M., 2012, NWBC 2012. The 4th Nordic Wood Biorefinery Conference: Helsinki, Finland, 23 - 25 October, 2012. Niemelä, K. (ed.). Espoo: VTT Technical Research Centre of Finland, p. 246-251 (VTT Technology; No. 53).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access
Xylans
Ethers
Coatings
Natural polymers
Bleached pulp
36 Citations (Scopus)

Structural and nanomechanical properties of paperboard coatings studied by peak force tapping atomic force microscopy

Sababi, M., Kettle, J., Rautkoski, H., Claesson, P. M. & Thormann, E., 2012, In : ACS Applied Materials & Interfaces. 4, 10, p. 5534-5541 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Coating techniques
Latex
Atomic force microscopy
Latexes
Coatings

Sustainable ink binders from renewable sources

Kela, L., Ilmonen, A., Jokiaho, K. & Harlin, A., 2012.

Research output: Contribution to conferenceConference articleProfessional

substrate
sustainability
recycling
ink
material

Thermally mouldable fibre composites

Immonen, K. & Jussila, A., 2012, VTT Technical Research Centre of Finland. 25 p. (VTT Research Report; No. VTT-R-04131-12).

Research output: Book/ReportReport

3 Citations (Scopus)

The self-organization of starch on paper

Anttila, M., Kataja, K., Kela, L., Hyvärinen, S., Lampinen, H. & Toivakka, M., 2012, In : Nordic Pulp and Paper Research Journal. 27, 3, p. 621-630 9 p.

Research output: Contribution to journalArticleScientificpeer-review

self organization
Starch
starch
modified starch
polymers

Towards sustainable packaging

Lattu, J., 2012, Research highlights in industrial biomaterials. Espoo: VTT Technical Research Centre of Finland, p. 13-14 (VTT Research Highlights; No. 2).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

Wood-based hemicelluloses for packaging materials

Vähä-Nissi, M., Talja, R., Hartman, J., Setälä, H., Poppius-Levlin, K., Hyvärinen, S., Sievänen, J. & Harlin, A., 2012, TAPPI 2012 PLACE Conference Proceedings. TAPPI Press, p. 364 - 386

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

packaging materials
hemicellulose
xylan
chemical derivatives
water vapor
5 Citations (Scopus)

Workplace health promotion and stakeholder positions: A Finnish case study

Auvinen, A-M., Kohtamäki, K. & Ilvesmäki, A., 2012, In : Archives of Environmental and Occupational Health. 67, 3, p. 177-184 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Health Promotion
workplace
Workplace
stakeholder
Health
2011
23 Citations (Scopus)

Absorption and adsorption of dye-based inkjet inks by coating layer components and the implications for print quality

Lamminmäki, T., Kettle, J. & Gane, P. A. C., 2011, In : Colloids and Surfaces A: Physicochemical and Engineering Aspects. 380, 1-3, p. 79-88 10 p.

Research output: Contribution to journalArticleScientificpeer-review

inks
Ink
Coloring Agents
Dyes
dyes