CO1 Commercial Operations

Research Output

Conference abstract in proceedings

Printable polyaniline-aluminum thin film batteries

Jussila, S., Valkiainen, M., Solehmainen, K. & Kielosto, S., 2010, Proceedings of the 44. Annual Conference of the Finnish Physical Society. Jyväskylä, Finland: University of Jyväskylä, p. 35 (University of Jyväskylä: Department of Physics. Research Report; No. 3/2010).

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Open Access

Printable polyaniline based thin film batteries

Jussila, S., Valkiainen, M. & Solehmainen, K., 2009, Book of Abstracts: 2nd International Symposium on Flexible Organic Electronics, IS-FOE09. Halkidiki, Greece, 130

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Protein production in filamentous fungi: cellular responses and strain improvement

Penttilä, M., Arvas, M., Pakula, T., Rautio, J., Valkonen, M. & Saloheimo, M., 2004, Plenary Lecture Abstracst. p. 43 L-7

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Open Access

Rapid gene expression analysis for evaluation of physiological state of micro-organisms

Rautio, J., Toivari, M., Smit, B., Bailey, M., Söderlund, H., Saloheimo, M. & Penttilä, M., 2006, International Specialised Symposium on Yeasts ISSY25: Systems Biology of Yeasts - from Models to Applications. Espoo: VTT Technical Research Centre of Finland, p. 58 P6. (VTT Symposium; No. 242).

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Open Access

Screening of ALD thin films for Cu diffusion barrier applications

Puurunen, R. L., Salonen, J., Nurmela, A., Ylivaara, O., Viljanen, H., Molarius, J., Monnoyer, P., Yliniemi, S., Pudas, M., Lehto, T., Lehto, T. & Li, W-M., 2013, Technical Program & Abstracts. American Vacuum Society AVS

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Silica pigment produced from silicate mining sidestreams for ink-jet paper coating application

Kenttä, E., Lamminmäki, T., Rautkoski, H., Teir, S., Bacher, J., Kettle, J. & Sarlin, J., 2012, 8th International Paper and Coating Chemistry Symposium, IPCCS 2012: Book of Abstracts. p. 78-80

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Wafer level MEMS encapsulation using SLID bonding

Suni, T., Xu, H., Heikkinen, H., Dekker, J., Vuorinen, V., Jaakkola, A., Monnoyer, P. & Paulasto-Kröckel, M., 2013, Book of abstracts. Stockholm, p. 105-106

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Conference article

A finline OMT for 20-to-30-GHz range

Jenu, M., 1994.

Research output: Contribution to conferenceConference articleScientificpeer-review

Approaching and developing strategic innovation capabilities of SMEs

Koivisto, T., Ilomäki, S-K., Airola, M. & Poikkimäki, J., 2006. 20 p.

Research output: Contribution to conferenceConference articleScientificpeer-review

A role for the COMPASS complex as determinant of brewing yeast fermentation performance

Gibson, B., Rautio, J., Huuskonen, A., Vuokko, H. & Londesborough, J., 2010.

Research output: Contribution to conferenceConference articleScientific

Characterisation of xylans and lignins isolated from various Eucalyptus species

Tamminen, T., Liitiä, T., Hyvärinen, S., Mikkonen, H., Hakala, T., Ohra-Aho, T., Rovio, S., Suurnäkki, A. & Colodette, J. L., 2011.

Research output: Contribution to conferenceConference articleScientificpeer-review

Combined far ultraviolet and thermal annealing of metal nitrate precursors for solution processed IZO TFTs

Leppäniemi, J., Ojanperä, K., Majumdar, H., Kololuoma, T. & Alastalo, A., 2014.

Research output: Contribution to conferenceConference articleScientific

Corridors: a political tool or business to be managed ?

Leviäkangas, P., Eckhardt, J., Rantala, J. & Aapaoja, A., 2016. 17 p.

Research output: Contribution to conferenceConference articleScientificpeer-review

Developing new cooperation models in winter maintenance

Aapaoja, A., Mantsinen, H., Hautala, R. & Leviäkangas, P., 2016. 13 p.

Research output: Contribution to conferenceConference articleScientific

Open Access

Development of durable pervious concrete for Finland's stormwater management needs

Kuosa, H. & Holt, E., 2014. 11 p.

Research output: Contribution to conferenceConference articleScientificpeer-review

Open Access

Digital transformation and trillion sensors in paper business

Kemppainen, A., 2016.

Research output: Contribution to conferenceConference articleScientific

Disposable roll-to-roll hot embossed electrophoresis chip applied for detection of antibiotic resistance genemecA in bacteria

Liedert, R., Amundsen, L., Hokkanen, A., Mäki, M., Scherer, J. R., Mathies, R. A., Hakalahti, L., Nevanen, T., Siitari, H. & Söderlund, H., 2011.

Research output: Contribution to conferenceConference articleScientific

Finnish winter road management: innovation capacibilitycapability

Aapaoja, A., Leviäkangas, P., Hautala, R., Heikki, M. & Kinnunen, T., 2015.

Research output: Contribution to conferenceConference articleScientific

Flexible bio-based pigment nanocellulose substrate for printed electronics

Torvinen, K., Sievänen, J., Mattila, T., Alastalo, A. & Hellen, E., 2012.

Research output: Contribution to conferenceConference articleScientific

Foresight for building a regional cluster platform: Cellulosic fibre value chain technology roadmap in Green Triangle region, South Australia

Ahlqvist, T., Dufva, M., Kettle, J., Vanderhoek, N., Valovirta, V., Loikkanen, T. & Roos, G., 2014. 15 p.

Research output: Contribution to conferenceConference articleScientific

Innovation capability of Finnish Road Weather and Maintenance Network: challenges and maturity level

Afriandi, Z., Aapaoja, A., Hautala, R. & Kinnunen, T. K., 2016.

Research output: Contribution to conferenceConference articleScientific

Instrumentation and Monitoring Systems for Evaluation of Plug Responses in Geological Disposal Demonstration

Holt, E., Bohner, E., Sandén, T., Malm, R., Pacovsky, J. & Svoboda, J., 2016, p. 152-158.

Research output: Contribution to conferenceConference articleScientific

Open Access

Large area printed smart systems: From components to systems

Kemppainen, A., Kopola, H., Korhonen, R., Alastalo, A., Maaninen, A., Tuomikoski, M., Hast, J. & Laakso, P., 2009.

Research output: Contribution to conferenceConference articleScientific

New approach to classification of cellulose fibrils and suitable methods for their characterization

Sneck, A., Pitkänen, M., Kangas, H., Tammelin, T. & Hellen, E., 2011.

Research output: Contribution to conferenceConference articleScientificpeer-review

6 Citations (Scopus)

Printed diagnostics: the lab of the future will be flat

Kololuoma, T. & Liedert, R., 2014.

Research output: Contribution to conferenceConference articleScientific

Roll to roll manufacturing of flexible hybrid systems

Kemppainen, A. & Rönkä, K., 2016.

Research output: Contribution to conferenceConference articleProfessional

Roll-to-roll manufacturing of low cost diagnostics: examples of optical and microfluidic structures

Känsäkoski, M., Liebert, R., Huttunen, O-H., Hiitola-Keinänen, J., Uusitalo, S., Hakalahti, L., Kurkinen, M., Kivimäki, L., Hast, J., Kololuoma, T., Maaninen, A. & Kopola, H., 2008.

Research output: Contribution to conferenceConference articleScientific

Setting up an ITS innovation environment with many stakeholders

Kostiainen, J., Hautala, R., Hinkka, V. & Aapaoja, A., 2016. 12 p.

Research output: Contribution to conferenceConference articleScientificpeer-review

Sustainable ink binders from renewable sources

Kela, L., Ilmonen, A., Jokiaho, K. & Harlin, A., 2012.

Research output: Contribution to conferenceConference articleProfessional

The European Roadmap 2025 for Mobility as a Service

Eckhardt, J., Aapaoja, A., Nykänen, L., Sochor, J., Karlsson, M. & König, D., 2018. 9 p.

Research output: Contribution to conferenceConference articleProfessional

The Role of Binder Type in Defining Inkjet Print Quality

Lamminmäki, T., Kettle, J., Puukko, P., Ketoja, J. & Gane, P., 2009.

Research output: Contribution to conferenceConference articleScientific

Open Access

The shift from traditional printing to inkjet printing: What should be taken into account?

Kela, L., Lamminmäki, T., Pitkänen, M., Heilmann, J., Rusko, E. & Mensonen, A., 2013.

Research output: Contribution to conferenceConference articleProfessional

Transcript analysis with the aid of affinity capture and gel electrophoresis on microchips

Amundsen, L., Del Bueno, N., Rautio, J., Iljin, K., Nees, M., Ketola, K., Sirkiä, M., Saviranta, P., Kotimaa, J., Pakanen, M., Siitari, H., Söderlund, H. & Mathies, R. A., 2009.

Research output: Contribution to conferenceConference articleScientific

Transcript and gene analyses by gel electrophoresis on microchips

Amundsen, L., Del Bueno, N., Rautio, J., Pakanen, M., Iljin, K., Nees, M., Ketola, K., Hakalahti, L., Liebert, R., Uusitalo, S., Kurkinen, M., Hokkanen, A., Stuns, I., Mathies, R. A., Nevanen, T., Söderlund, H. & Siitari, H., 2010, p. 18-19.

Research output: Contribution to conferenceConference articleScientific

Uusia teollisia mittausratkaisuja kuituprosesseihin

Siikanen, S. & Solehmainen, K., 2016.

Research output: Contribution to conferenceConference articleProfessional

VTT-TRAC for focused transcript analysis

Satokari, R., Kataja, K., Rautio, J., Paju, A., Stenman, J., Saloheimo, M. & Söderlund, H., 2004.

Research output: Contribution to conferenceConference articleScientific

Conference article in proceedings

A 40-GHz MMIC frequency divider-by-two

Koivunen, K. & Jenu, M., 1997, 27th European Microwave Conference. Tel-Aviv: IEEE Institute of Electrical and Electronic Engineers , Vol. 2. p. 662-667

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

2 Citations (Scopus)

A 60-GHz LNA using commercially available PM HEMTs for intersatellite and mobile communications

Lunden, O-P., Sipilä, M. & Jenu, M., 1994, 1994 IEEE MTT-S International Microwave Symposium Digest. New York: IEEE Institute of Electrical and Electronic Engineers , p. 1341-1344

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A case study of multiple-site fatigue crack growth in the F-18 hornet bulkhead

Andersson, B., Blom, A. F., Falk, U., Wang, G. S., Koski, K., Siljander, A., Linna, J., Miettinen, A., Vaaraniemi, K. & Lahtinen, R., 2009, Proceedings of the 25th Symposium of the International Committee on Aeronautical Fatigue. Springer, p. 707-741

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Accounting for coupled deterioration mechanisms when designing durable concrete containing mineral by-products

Holt, E., Kuosa, H., Leivo, M., Al-Neshawy, F., Piironen, J. & Sistonen, E., 2010, Sustainable construction materials and technologies: Second International Conference on Sustainable Construction Materials and Technologies, 28-30 June 2010, Ancona Italy (Volumes 1-3). Zachar, J., Claisse, P., Naik, T. & Ganjian, E. (eds.). Milwaukee, Wisconsin, USA, p. 1631-1642

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A closer look into more efficient use of coating color

Kokko, A., Kettle, J. & Kunnari, V., 2011, 65th Appita Annual Conference and Exhibition: Innovate for the Future. Appita, p. 311-316

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Adding foam to papermaking: Why and how ?

Hellén, E. K. O., 2015, Paper Conference and Trade Show (PaperCon 2015). Curran Associates Inc., p. 1329-1347

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Al2O3-TiO2 nanolaminates for MEMS and optical applications: Combining the trimethylaluminum/water and titanium tetrachloride/water ALD processes

Puurunen, R., Kattelus, H., Saarilahti, J., Solehmainen, K., Lindfors, S. & Soininen, P. J., 2007, Proceedings of the 7th International Conference on Atomic Layer Deposition, ALD 2007. American Vacuum Society AVS, 28

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A low-aspect-ratio, roll-to-roll hot embossed inertial microfluidic sorter

Wang, X., Liedert, C., Liedert, R. & Papautsky, I., 2014, Proceedings of the 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2014. p. 2447-2449

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1 Citation (Scopus)

A new type of filler-nanocellulose composite substrate for printed electronics applications

Sievänen, J., Torvinen, K., Hjelt, T. & Hellen, E., 2011, Proceedings: TAPPI International Conference on Nanotechnology for Renewable Materials 2011. TAPPI Press, p. 75-84

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

3 Citations (Scopus)

Application of enzymes in wood biorefinery for high-value products

Hakala, T., Liitiä, T. & Suurnäkki, A., 2011, ITALIC 6, Science & Technology of Biomasses: Advances and Challenges, From forest and agricultural biomasses to high added value products: processes and materials. Viterbo, p. 273-276

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Application of nano-fibrillated cellulose as a paper surface treatment for inkjet printing

Luu, W. T., Bousfield, D. W. & Kettle, J., 2011, PaperCon 2011. TAPPI Press, p. 1152-1163

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

10 Citations (Scopus)

A simple 2D-model for vibration analysis of hydromechanical roll systems

Kiviniemi, T., Holopainen, T. & Katajamäki, K., 2001, Modelling and simulation of multitechnological machine systems. Espoo: VTT Technical Research Centre of Finland, p. 109-120 (VTT Symposium; No. 209).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access

Aspects on packaging safety and biomaterials

Leminen, V., Kainusalmi, M., Tanninen, P., Lindell, H., Varis, J., Ovaska, S., Backfolk, K., Pitkänen, M., Sipiläinen-Malm, T., Hartman, J., Rusko, E., Hakola, L., Ihalainen, P., Sarfraz, J. & Peltonen, J., 2013, Proceedings of 26th IAPRI Symposium on Packaging 2013. VTT Technical Research Centre of Finland, p. 483-493

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific