Antti Vaajoki

  • Phone+358407377195
20112019

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2019

Wear of additively manufactured tool steel in contact with aluminium alloy

Huttunen-Saarivirta, E., Heino, V., Vaajoki, A., Hakala, T. J. & Ronkainen, H., 8 Jun 2019, In : Wear. 432-433, 202934.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)
2018

Design and Verification of a Wireless Readout System for Integrated Motor Axle Condition Monitoring

McCaffrey, C., Vaajoki, A., Halme, J., Sillanpää, T., Revuelta, A. & Puukko, P., 2018, 2008 IEEE SENSORS. IEEE Institute of Electrical and Electronic Engineers, 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1 Citation (Scopus)

The Effect of L-PBF Process Parameters on Surface Quality and Mechanical Properties of H13 Hot Work Tool Steel

Haapalainen, M., Riipinen, T., Jokinen, A., Puukko, P. & Vaajoki, A., 2018, Euro PM2018 Proceedings. European Power Metallurgy Association EPMA

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Tribological properties of thin films made by atomic layer deposition sliding against silicon

Kilpi, L., Ylivaara, O. M. E., Vaajoki, A., Liu, X., Rontu, V., Sintonen, S., Haimi, E., Malm, J., Bosund, M., Tuominen, M., Sajavaara, T., Lipsanen, H., Hannula, S. P., Puurunen, R. L. & Ronkainen, H., 1 Jan 2018, In : Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films. 36, 1, 01A122.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)
2017

Comparison of laboratory rolling-sliding wear tests with in-service wear of nodular cast iron rollers against wire ropes

Oksanen, V., Valtonen, K., Andersson, P., Vaajoki, A., Laukkanen, A., Holmberg, K. & Kuokkala, V. T., 1 Jan 2017, In : Wear. 340-341, p. 73-81

Research output: Contribution to journalArticleScientificpeer-review

19 Citations (Scopus)
2016

AM-prosessin integrointi tuotantoon: metalliosien valmistuksen työvaiheet

Vaajoki, A. & Metsä-Kortelainen, S., 2016, VTT Technical Research Centre of Finland. 30 p. (VTT Tutkimusraportti; No. VTT-R-03327-16).

Research output: Book/ReportReport

Design guide for additive manufacturing of metal components by SLM process

Kokkonen, P., Salonen, L., Virta, J., Hemming, B., Laukkanen, P., Savolainen, M., Komi, E., Junttila, J., Ruusuvuori, K., Varjus, S., Vaajoki, A., Kivi, S. & Welling, J., 2016, VTT Technical Research Centre of Finland. 131 p. (VTT Research Report, Vol. VTT-R-03160-16).

Research output: Book/ReportReport

Open Access

Microscratch testing method for systematic evaluation of the adhesion of atomic layer deposited thin films on silicon

Kilpi, L., Ylivaara, O. M. E., Vaajoki, A., Malm, J., Sintonen, S., Tuominen, M., Puurunen, R. L. & Ronkainen, H., 2016, In : Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films. 34, 1, 01A124.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
14 Citations (Scopus)

Static friction measurements on steel against uncoated and coated cast iron

Andersson, P., Kilpi, L., Holmberg, K., Vaajoki, A. & Oksanen, V., 2016, In : Tribologia. 34, 1-2, p. 5-40

Research output: Contribution to journalArticleScientificpeer-review

Open Access
1 Citation (Scopus)
2015

Mesoscale modelling of short crack initiation in metallic selective laser melting microstructures

Andersson, T., Laukkanen, A., Pinomaa, T., Jokinen, A., Vaajoki, A. & Laitinen, T., 2015, EURO PM2015 congress proceedings. European Power Metallurgy Association EPMA

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1 Citation (Scopus)
2014

Tribological Performance of ALD Al2O3, TiO2 and ATO nanolaminate coatings

Kilpi, L., Vaajoki, A., Varjus, S., Ylivaara, O., Puurunen, R. L. & Ronkainen, H., 2014, BALD2014 Abstract book.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Tribological Testing and Modeling of Elastomeric Materials

Vaajoki, A., Laukkanen, A., Waudby, R., Kivikytö-Reponen, P., Valtonen, K. & Kuokkala, V-T., 2014, In : Key Engineering Materials. 604, p. 87-90

Research output: Contribution to journalArticleScientificpeer-review

2013

Microstructure and tribological properties of pulsed electric current sintered alumina-zirconia nanocomposites with different solid lubricants

Erkin Cura, M., Kim, S-H., Muukkonen, T., Varjus, S., Vaajoki, A., Söderberg, O., Suhonen, T., Kanerva, U., Wohn Lee, S. & Hannula, S-P., 2013, In : Ceramics International. 39, 2, p. 2093-2105 13 p.

Research output: Contribution to journalArticleScientificpeer-review

19 Citations (Scopus)

Tribological behaviour of carbon thin films against bearing steel under continuous sliding in hydrogen environment

Vaajoki, A., Tanaka, H., Varjus, S., Ronkainen, H. & Sugimura, J., 2013, Proceedings: 5th World Tribology Congress, WTC 2013. p. 3098-3101

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2 Citations (Scopus)

Tribological testing and modeling of elastomeric materials

Vaajoki, A., Laukkanen, A., Waudby, R., Kivikytö-Reponen, P., Valtonen, K. & Kuokkala, V-T., 2013, p. 20 .

Research output: Contribution to conferenceConference articleScientific

2012

Kitkahäviöt henkilöautoissa

Vaajoki, A., Holmberg, K. & Andersson, P., 2012, In : Tie & Liikenne. 8, 4, p. 18-19 2 p.

Research output: Contribution to journalArticleProfessional

2011

Pulsed electric current sintering of the Al2O3-15wt-%ZrO2 nanocomposites with 3wt-% of different solid lubricants

Cura, E., Kim, S-H., Cho, S-H., Suhonen, T., Muukkonen, T., Vaajoki, A., Söderberg, O., Kanerva, U., Lee, S. W. & Hannula, S-P., 2011, In : Materials Science Forum. 695, p. 473-476

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)