Research output per year
Research output per year
Research output
- 18 results
Search results
-
2019
Dynamic and Flexible Data Acquisition and Data Analytics System Software Architecture
Hästbacka, D., Halme, J., Larranaga, M., More, R., Mesiä, H., Björkbom, M., Barna, L., Pettinen, H., Elo, M., Jaatinen, A. & Hoikka, H., 30 Oct 2019, IEEE Sensors 2019. IEEE Institute of Electrical and Electronic Engineers, 4 p. 8956662Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
4 Citations (Scopus) -
Monitoring of Production Processes and the Condition of the Production Equipment through the Internet
Halme, J., Jantunen, E., Hästbacka, D., Hegedűs, C., Varga, P., Björkbom, M., Mesiä, H., More, R., Jaatinen, A., Barna, L., Tuominen, P., Pettinen, H., Elo, M. & Larrañaga, M., 2019, 6th International Conference on Control, Decision and Information Technologies, CoDIT 2019. IEEE Institute of Electrical and Electronic Engineers, p. 1295-1300 6 p. 8820688Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
11 Citations (Scopus) -
2018
Design and Verification of a Wireless Readout System for Integrated Motor Axle Condition Monitoring
McCaffrey, C., Vaajoki, A., Halme, J., Sillanpää, T., Revuelta, A. & Puukko, P., 26 Dec 2018, 2008 IEEE SENSORS. IEEE Institute of Electrical and Electronic Engineers, 4 p. 8589513. (Proceedings of IEEE Sensors, Vol. 2018-October).Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
2 Citations (Scopus) -
2017
Machine performance and availability prediction through the lifetime
Kivikytö-Reponen, P., Tiusanen, R., Halme, J., Raunio, K. & Saarela, O., 2017, Proceedings. Tampere University of Technology, p. 5-7Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
-
2006
Condition monitoring of a material handling industrial robot
Halme, J., 12 Jun 2006, Condition Monitoring and Diagnostic Engineering Management: COMADEM 2006. Luleå University of Technology, p. 415-424Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific
-
Condition monitoring of industrial robots and concept for prognostics
Halme, J., 2006, Prognostics for industrial machinery availability: Final seminar. Espoo: VTT Technical Research Centre of Finland, p. 66-85Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific
Open Access -
Towards adaptive grease lubrication
Parikka, R., Jantunen, E., Halme, J., Vaajoensuu, E. & Sainio, H., 1 Dec 2006, Prognostics for Industrial Machinery Availabitity: Final Seminar. Helle, A. (ed.). VTT Technical Research Centre of Finland, p. 49-65 17 p. (VTT Symposium; No. 243).Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
Open Access -
2005
Prognostics for industrial machinery availability
Holmberg, K., Helle, A. & Halme, J., 2005, Proceedings of the 2nd international seminar on Maintenance, condition monitoring and diagnostics. University of Oulu, p. 17-29Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific
-
Robotin kunnonvalvonta
Halme, J., 2005, Kunnossapito ja prognostiikka : Prognos-vuosiseminaari 2005. Espoo: VTT Technical Research Centre of Finland, p. 57-72 16 p. (VTT Symposium; No. 239).Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
Open Access -
2003
Wireless communication methods in condition monitoring
Halme, J., Vidqvist, V. & Helle, A., 2003, Condition Monitoring and Diagnostic Engineering Management (COMADEM 2003): Proceedings of the 16th International Congress. Växjö: Växjö University, p. 185-197Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
-
2002
Condition monitoring of oil lubricated ball bearing using wear debris and vibration analysis
Halme, J., 2002, Frontiers in tribology: Proceedings of the 6th International Tribology Conference. University of Western Australia, Vol. 2. p. 549-553Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
-
Wear particle recognition based on neural networks, fuzzy logic and pattern recognition methods
Halme, J., 2002, Mechanical Engineering Research: Proceedings of the 3.1.2002 TUKEVA seminar on Mechanical Engineering Research, New Possibilities by Co-operation. Tampere: Tampere University of Technology, 4 p.Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific
-
2000
Mikroantureiden soveltaminen kunnonvalvontaan
Halme, J., 2000, Käyttövarmuussuunnittelu ja diagnostiikka. Espoo: VTT Technical Research Centre of Finland, p. 25-31 (VTT Symposium; No. 206).Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
-
1999
MEMS-mikroantureiden kehitys koneiden kunnonvalvontaan
Halme, J., 1999, Käyttövarmuus ja käyttökunnon hallinta. Espoo: VTT Technical Research Centre of Finland, p. 103-114 (VTT Symposium; No. 196).Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific
-
1998
Flexible expert system for the diagnosis of centrifugal pumps
Jantunen, E., Halme, J. & Vähä-Pietilä, K., 1998, COMADEM '98: Proceedings of the 11th International conference on condition monitoring and diagnostic engineering management. Monash University Publishing, 10 p.Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific
-
1997
Mikroanturit kunnonvalvonnassa
Halme, J., 1997, Käyttövarmuus kilpailutekjijänä. Espoo: VTT Technical Research Centre of Finland, p. 119-130 (VTT Symposium; No. 175).Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific
-
Simulation of faults in rotating machines
Jantunen, E., Vähä-Pietilä, K., Halme, J., Katajamäki, K., Virtanen, J. & Volkov, T., 1997, COMADEM '97: 10th international congress and exhibition on condition monitoring and diagnostic engineering management. Espoo: VTT Technical Research Centre of Finland, Vol. 1. p. 283-292 (VTT Symposium; No. 171).Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
-
The torque of mill drive shafts at a hot strip mill
Säynätjoki, M., Halme, J. & Pajukoski, M., 1997, COMADEM '97: 10th international congress and exhibition on condition monitoring and diagnostic engineering management. Espoo: VTT Technical Research Centre of Finland, Vol. 2. p. 390-399 (VTT Symposium; No. 172).Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review