No photo of Jarmo Alanen

Jarmo Alanen

Master of Science, Senior Scientist

  • Phone+358405015813
1990 …2019

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2019

Demonstration of a conformity assessment data model

Linnosmaa, J. & Alanen, J., Jul 2019, 2019 IEEE 17th International Conference on Industrial Informatics, INDIN 2019. IEEE Institute of Electrical and Electronic Engineers, p. 369-373 5 p. 8972077. (IEEE International Conference on Industrial Informatics (INDIN)).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Early hybrid safety and security risk assessment based on interdisciplinary dependency models

Papakonstantinou, N., Linnosmaa, J., Alanen, J., Bashir, A. Z., O'Halloran, B. & Van Bossuyt, D. L., 1 Jan 2019, RAMS 2019 - 2019 Annual Reliability and Maintainability Symposium, Proceedings. IEEE Institute of Electrical and Electronic Engineers, 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Remote diagnostics application software for remote handling equipment

Alanen, J., Ruiz Morales, E., Muhammad, A., Saarinen, H. & Minkkinen, J., 29 Jan 2019, (Accepted/In press) In : Fusion Engineering and Design.

Research output: Contribution to journalArticleScientificpeer-review

2018

Automatic fault tree generation from multidisciplinary dependency models for early failure propagation assessment

Papakonstantinou, N., Alanen, J., Linnosmaa, J. & O'Halloran, B., 2018, ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 38th Computers and Information in Engineering Conference. American Society of Mechanical Engineers ASME, Vol. 1B. 10 p. DETC2018-85189

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1 Citation (Scopus)
2017

A model driven approach for early assessment of defense in depth capabilities of complex sociotechnical systems

Papakonstantinou, N., Tommila, T., O'Halloran, B., Alanen, J. & Bossuyt, D. L. V., 1 Jan 2017, 37th Computers and Information in Engineering Conference. American Society of Mechanical Engineers ASME, Vol. 1. 10 p. 67257

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2 Citations (Scopus)

Conformity assessment data model

Alanen, J., Linnosmaa, J. & Tommila, T., 2017, VTT Technical Research Centre of Finland. 34 p. (VTT Research Report, Vol. VTT-R-06743-17).

Research output: Book/ReportReport

Integrated safety assessment and justification of nuclear power plant automation (SAUNA)

Pakonen, A., Alanen, J., Björkman, K., Buzhinsky, I., Helminen, A., Hirvonen, A., Holmberg, J-E., Koskinen, H., Laarni, J., Linnosmaa, J., Nevalainen, R., Papakonstantinou, N., Porthin, M., Tommila, T., Tyrväinen, T., Uusitalo, E., Valkonen, J., Varkoi, T. & Vyatkin, V., 2017, SAFIR2018 - The Finnish Research Programme on Nuclear Power Plant Safety 2015-2018: Interim Report. VTT Technical Research Centre of Finland, p. 40-65 (VTT Technology, Vol. 294).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access
2016

A reference model for the NPP I&C qualification process and safety demonstration data

Alanen, J. & Tommila, T., 2016, VTT Technical Research Centre of Finland. 43 p. (VTT Research Report, Vol. VTT-R-00478-16).

Research output: Book/ReportReport

Systems engineering management plan template - V1

Alanen, J. & Salminen, K., 2016, VTT Technical Research Centre of Finland. 90 p. (VTT Research Report, Vol. VTT-R-00153-16).

Research output: Book/ReportReport

Views on safety demonstration and systems engineering for digital I&C

Valkonen, J., Tommila, T., Alanen, J., Linnosmaa, J. & Varkoi, T., 2016. 13 p.

Research output: Contribution to conferenceConference articleScientific

Open Access
2015

Conceptual model for safety requirements specification and management in nuclear power plants

Tommila, T. & Alanen, J., 2015, Espoo: VTT Technical Research Centre of Finland. 120 p. (VTT Technology; No. 238).

Research output: Book/ReportReport

Open Access

Implementation of RegIF for the Simantics platform

Mätäsniemi, T. & Alanen, J., 2015, VTT Technical Research Centre of Finland. 22 p. (VTT Research Report, Vol. VTT-R-04722-15).

Research output: Book/ReportReport

Open Access

Requirements traceability in simulation driven development

Alanen, J., Isto, P., Tommila, T. & Tikka, P., 2015, Espoo: VTT Technical Research Centre of Finland. 111 p. (VTT Technology; No. 236).

Research output: Book/ReportReport

Open Access
2013

Evaluating performance levels of machine control functions

Hietikko, M., Malm, T., Alanen, J. & Saha, H., 2013, In : CAN Newsletter. 2, June, p. 32-37 6 p.

Research output: Contribution to journalArticleProfessional

Open Access

OSA I - Näkökulmia monimutkaisten järjestelmien hallintaan

Leino, S-P., Viitaniemi, J., Alanen, J., Karvonen, I., Uoti, M., Sääski, J. & Granholm, G., 2013, Katsaus kompleksisten järjestelmien elinkaaren suunnitteluun. Granholm, G. (ed.). Espoo: VTT Technical Research Centre of Finland, p. 13-48 (VTT Technology; No. 121).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

Saksinostimen teknisten prosessien hallinta

Alanen, J. & Valkama, P., 2013, Katsaus kompleksisten järjestelmien elinkaaren suunnitteluun. Granholm, G. (ed.). Espoo: VTT Technical Research Centre of Finland, p. 136-169 (VTT Technology; No. 121).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

SE-toimintatavan implementointi verkostoympäristössä

Uoti, M., Karvonen, I. & Alanen, J., 2013, Katsaus kompleksisten järjestelmien elinkaaren suunnitteluun. Granholm, G. (ed.). Espoo: VTT Technical Research Centre of Finland, p. 85-112 (VTT Technology; No. 121).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

Vaatimusten luokittelu

Alanen, J., 2013, Katsaus kompleksisten järjestelmien elinkaaren suunnitteluun. Granholm, G. (ed.). Espoo: VTT Technical Research Centre of Finland, p. 113-134 (VTT Technology; No. 121).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access
2012

Evaluating performance levels of machine control functions

Hietikko, M., Malm, T., Alanen, J. & Saha, H., 2012, Proceedings of the 7th International Conference on the Safety of Industrial Automated Systems: SIAS 2012. Montreal, p. 121-126

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

2011

Engineering Data Model for Machine Automation Systems

Alanen, J., Vidberg, I., Nikula, H., Papakonstantinou, N., Pirttioja, T. & Sierla, S., 2011, Espoo: VTT Technical Research Centre of Finland. 137 p. (VTT Tiedotteita - Research Notes; No. 2583).

Research output: Book/ReportReport

Open Access
2 Citations (Scopus)

Ensuring systems engineering data integrity with a central data repository

Alanen, J., Sierla, S. & Pirttioja, T., 2011, Automaatio XIX: Seminaari 15.-16.3. 2011. Visala, A. (ed.). Helsinki: Suomen Automaatioseura ry, 6 p. (Suomen automaatioseura. Julkaisusarja; No. 41).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Risk estimation studies in the context of a machine control function

Hietikko, M., Malm, T. & Alanen, J., 2011, In : Reliability Engineering and System Safety. 96, 7, p. 767-774 8 p.

Research output: Contribution to journalArticleScientificpeer-review

21 Citations (Scopus)

Systeemisuunnittelusta IEC 61131-3 ohjelmointiin ja sähkösuunnittelukuvien piirtoon

Alanen, J. & Nikula, H., 2011, In : Automaatioväylä. 4, p. 18-20

Research output: Contribution to journalArticleProfessional

2010

A safety process reference model and tool for the development of machine control systems

Hietikko, M., Alanen, J. & Malm, T., 2010, SIAS 2010: The 6th International Conference on Safety of Industrial Automated Systems, Tampere, 14.-15.6.2010. Suomen Automaatioseura ry, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Assessing safety of CAN-communications systems

Alanen, J., 2010, SIAS 2010: The 6th International Conference on Safety of Industrial Automated Systems, Tampere, 14.-15.6.2010. Helsinki: Suomen Automaatioseura ry, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Koneenohjausjärjestelmien suunnitteluprosessi turvakuriin

Alanen, J. & Sierla, S., 2010, In : Automaatioväylä. 2010, 3, p. 26-28

Research output: Contribution to journalArticleProfessional

Operating Hazard Analysis Using Supplemented Use Case Descriptions

Alanen, J. & Tiusanen, R., 2010, SIAS 2010: The 6th International Conference on Safety of Industrial Automated Systems, Tampere, 14.-15.6.2010. Helsinki: Suomen Automaatioseura ry, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Reducing Redesign of Safety Critical Control Systems by Early Risk Assessment

Papakonstantinou, N., Sierla, S., Alanen, J. & Koskinen, K., 2010, Proceedings: 8th IEEE International Conference on Industrial Informatics, INDIN 2010. Osaka, Japan: IEEE Institute of Electrical and Electronic Engineers, p. 460-465

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

4 Citations (Scopus)

Rigorous work flow and data model for risk assessments of machine control systems

Alanen, J., Tiusanen, R., Sierla, S., Papakonstantinou, N. & Koskinen, K., 2010, SIAS 2010: The 6th International Conference on Safety of Industrial Automated Systems, Tampere, 14.-15.6.2010. Helsinki: Suomen Automaatioseura ry, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Safety-related systems in machinery: Variety of software

Malm, T., Hietikko, M. & Alanen, J., 2010, SIAS 2010: The 6th International Conference on Safety of Industrial Automated Systems, Tampere, 14.-15.6.2010. Helsinki: Suomen Automaatioseura ry, 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

2009

Kokemuksia koneiden ohjausjärjestelmien turvallisuuden suoritustason (PL) laskemisesta

Malm, T., Hietikko, M. & Alanen, J., 2009, Automaatio XVIII seminaari 2009. Helsinki: Suomen Automaatioseura ry, 6 p. (Suomen automaatioseura. Julkaisusarja; No. 36).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Open Access

Safety-critical software in machinery

Malm, T., Hietikko, M., Alanen, J., Vepsäläinen, T. & Katara, M., 2009, Scientific activities in Safety & Security 2009. Rouhiainen, V. (ed.). VTT Technical Research Centre of Finland, p. 64-65

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

Towards Automatic Testing of Control Systems for Intelligent Mobile Machines

Hyvönen, M., Multanen, P., Mantere, P., Kolu, A., Vallas, A., Alanen, J. & Rantala, S., 2009.

Research output: Contribution to conferenceOther conference contributionScientific

Turvallisuusprosessin referenssimalli koneenohjausjärjestelmien suunnitteluun

Alanen, J., Malm, T. & Hietikko, M., 2009. 6 p.

Research output: Contribution to conferenceConference articleScientific

2008

Safety Regulations of Programmable Control Systems

Alanen, J., 2008.

Research output: Contribution to conferenceConference articleScientific

System Safety Concept for Machinery Systems

Tiusanen, R., Hietikko, M., Alanen, J., Pátkai, N. & Venho, O., 2008, Espoo: VTT Technical Research Centre of Finland. 57 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 2437).

Research output: Book/ReportReport

Open Access
2007

System safety concept for remotely controlled mobile machine systems

Tiusanen, R., Hietikko, M. & Alanen, J., 2007, Proceedings: 5th International Conference Safety Of Industrial Automated Systems, SIAS 2007. p. 52-57

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Trends in vehicle communication and consumer electronics connectivity

Tarkiainen, M., Kauvo, K., Koskinen, H. & Alanen, J., 2007, Proceedings of the 14th World Congress on Intelligent Transport Systems (ITS). Held Beijing. October 2007. Intelligent Transportation Society of America - ITS America, 2068

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2 Citations (Scopus)
2006

Diagnostics of mobile work machines

Alanen, J., Haataja, K., Laurila, O., Peltola, J. & Aho, I., 2006, Espoo: VTT Technical Research Centre of Finland. 126 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 2343).

Research output: Book/ReportReport

Open Access
2 Citations (Scopus)
2004
Open Access

Safety of Digital Communications in Machines

Alanen, J., Hietikko, M. & Malm, T., 2004, Espoo: VTT Technical Research Centre of Finland. 98 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 2265).

Research output: Book/ReportReport

Open Access
2003

A safety analysis tool for a distributed machine control system

Hietikko, M., Alanen, J. & Malm, T., 2003, SIAS 2003, 3rd International conference: safety of industrial automated systems: Proceedings. INRS Institut national de recherche et de sécurité, p. 6-41 - 6-46

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Kenttäväylien sanomaliikenteen analysointimenetelmä

Alanen, J., Hietikko, M., Malm, T. & Tiusanen, R., 2003, Automaatio 03 Seminaaripäivät: Automaation sovellukset ja käyttökokemukset. Helsinki: Suomen Automaatioseura ry, p. 305-310 (Suomen automaatioseura. Julkaisusarja, Vol. 27).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

2002

Diagnostics of mobile machinery: Future trends

Vidqvist, V., Alanen, J. & Tervo, J., 2002, VTT Technical Research Centre of Finland. 51 p. (VTT Tuotteet ja tuotanto. Tutkimusraportti; No. BTUO43-021058).

Research output: Book/ReportReport

Open Access

Distributed systems for safety related applications in machinery

Malm, T., Hietikko, M. & Alanen, J., 2002, Human-friendly reliable mechatronics: Proceedings of the ICMA'02. Tampere: Tampere University of Technology, p. 395-402

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Procedure and analysis methods for risk assessment of automated working machinery

Tiusanen, R., Hietikko, M. & Alanen, J., 2002, VTT Industrial Systems Review 2002. p. 42-47

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleScientific

Risk analysis of a large-scale mine automation system

Tiusanen, R., Hietikko, M. & Alanen, J., 2002, Human-friendly reliable mechatronics: Proceedings of the ICMA'02. Tampere: Tampere University of Technology, p. 475-782

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2001

Wireless communication in work machines

Vähä, P., Alanen, J., Känsälä, K. & Lehtinen, H., 2001, Automation Technology Review 2001. Kelhä, V. (ed.). Espoo: VTT Technical Research Centre of Finland, p. 6 - 11

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

2000

CAN-väylätekniikan perusteet - Osa 1. Sanomat eetteriin

Alanen, J., 2000, In : Suomen Autolehti. 3

Research output: Contribution to journalArticleProfessional