No photo of Jarno Petäjä

Jarno Petäjä

  • Phone+358408205061
20032019

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

  • 17 Conference article in proceedings
  • 10 Article
  • 2 Conference article
  • 2 Conference Poster
Filter
Conference article in proceedings
2015

Optical coupling structure made by imprinting between single-mode polymer waveguide and embedded VCSEL

Karppinen, M., Salminen, N., Korhonen, T., Alajoki, T., Petäjä, J., Bosman, E., Van Steenberge, G., Justice, J., Khan, U., Corbett, B. & Boersma, A., 2015, Optical Interconnects XV: 93680H. International Society for Optics and Photonics SPIE, (Proceedings of SPIE, Vol. 9368).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2 Citations (Scopus)
2012

Long single-mode waveguides made by imprint patterning for optical interconnects and sensors

Karppinen, M., Hiltunen, J., Kokkonen, A., Petäjä, J., Masuda, N., Hiltunen, M., Tuominen, J. & Karioja, P., 2012, Proceedings of SPIE 8428: Micro-Optics 2012. Thienpon, H. (ed.). International Society for Optics and Photonics SPIE, 842814. (Proceedings of SPIE, Vol. 8428).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2 Citations (Scopus)
2009

In-mould integration of electronics into mechanics and reliability of overmoulded electronic and optoelectronic components

Alajoki, T., Koponen, M., Juntunen, E., Petaja, J., Heikkinen, M., Ollila, J., Sitomaniemi, A., Kosonen, T., Aikio, J. & Makinen, J-T., 2009, European Microelectronics and Packaging Conference. IEEE Institute of Electrical and Electronic Engineers, p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

6 Citations (Scopus)
2008

Active matrix flexible display array fabricated by MEMS printing techniques

Lo, C-Y., Huttunen, O-H., Hiitola-Keinänen, J., Petäjä, J., Hast, J., Maaninen, A., Kopola, H., Fujita, H. & Toshiyoshi, H., 2008, Proceedings of the 15th International Display Workshop. p. 1353-1356

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Adhesion of Flexible Printed Circuit Substrate to Overmoulded Polymer and Characterization of Overmoulded Electronic Components

Koponen, M., Alajoki, T., Kosonen, T., Petäjä, J., Heikkinen, M., Vuorinen, T. & Mäkinen, J-T., 2008, IMAPS Nordic Annual Conference Denmark 2008. IMAPS Nordic, p. 207-212

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

3 Citations (Scopus)

Low cost printed flexible multilayer substrates

Jaakola, T., Lahti, M., Petäjä, J., Kautio, K., Rönkä, K. & Lenkkeri, J., 2008, Proceedings: 10th Electronics Packaging Technology Conference, EPTC 2008. Piscataway, NJ, USA: IEEE Institute of Electrical and Electronic Engineers, p. 344-349

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

8 Citations (Scopus)

Low operation voltage non self-emissive MEMS color filter pixels

Lo, C., Hast, J., Huttunen, O-H., Petäjä, J., Hiitola-Keinänen, J., Maaninen, A., Kopola, H., Fujita, H. & Toshiyoshi, H., 2008, 2008 IEEE/LEOS International Conference on Optical MEMS and Nanophotonics, OPT MEMS. Freiburg, Germany, 11 - 14 Aug. 2008. IEEE Institute of Electrical and Electronic Engineers, p. 116-117

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2 Citations (Scopus)
2007

Capability of Realization of Roll-to-Roll Printed MEMS Fabry-Pérot Display Pixels

Lo, C., Huttunen, O-H., Petäjä, J., Hast, J., Maaninen, A., Kopola, H., Fujita, H. & Toshiyoshi, H., 2007, Proceedings of the 2nd International Student Conference "Printing Future Days 2007". p. 19-24

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access

Multilayer flexible wiring board based on screen printed conductors

Petäjä, J., Kautio, K., Funck, H., Karppinen, M., Karioja, P. & Vatanparast, R., 2007, 16th European Microelectronics and Packaging Conference and Exhibition: EMPC 2007.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2 Citations (Scopus)

Novel Printing Processes for MEMS Fabry-Perot Display Pixel

Lo, C., Huttunen, O-H., Petäjä, J., Hast, J., Maaninen, A., Kopola, H., Fujita, H. & Toshiyoshi, H., 2007, 14th International Display Workshops (IDW '07). p. 1968-1971

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2006

High-power module integrated in LTCC substrate

Lahti, M., Kautio, K., Juntunen, E., Petäjä, J. & Karioja, P., 2006, 4th European Microelectronics and Packaging Symposium. p. 155-158

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Towards Roll-to-roll fabricated integrated modules

Hast, J., Kololuoma, T., Kopola, H., Maaninen, A., Petäjä, J., Sandberg, H. & Tuomikoski, M., 2006, Proceedings of Printed Electronics Europe 06. 19.-21. 4.. Canbridge

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

2005

Advanced heat management methods in LTCC technology

Lahti, M., Kautio, K., Juntunen, E., Petäjä, J. & Karioja, P., 2005, EMRS DTC 2nd Annual Technical Conference. 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Lämmönhallinnan haasteita elektroniikan komponenteissa, moduuleissa ja liitoksissa

Lenkkeri, J., Juntunen, E., Petäjä, J., Jaakola, T., Lahti, M., Keränen, K. & Kautio, K., 2005, New exploratory technologies 2005. Tuominen, A. (ed.). Turku Centre for Computer Science, p. 311 - 319 (TUCS national publication; No. 8).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

2004

Cost-effective packaging of laser modules using LTCC substrates

Keränen, K., Mäkinen, J-T., Heilala, J., Väätäinen, O., Kautio, K., Ollila, J., Petäjä, J., Karppinen, M., Heikkinen, V. & Karioja, P., 2004, Photonics Packaging and Integration IV. International Society for Optics and Photonics SPIE, p. 111-121 (Proceedings of SPIE, Vol. 5358).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

9 Citations (Scopus)

Design for photonics modules - combining optical geometrical and assembly process tolerance simulation in concept creation

Heilala, J., Väätäinen, O., Keränen, K., Mäkinen, J-T., Kautio, K., Ollila, J., Petäjä, J., Karppinen, M., Heikkinen, V. & Karioja, P., 2004, Proceeding of the IPAS 2004 International Precision Assembly Seminar. p. 199-204

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2003

Thermal management of power MMIC on LTCC substrate

Jaakola, T., Kautio, K., Petäjä, J. & Lenkkeri, J., 2003, 14th European Microelectronics and Packaging Conference & Exhibition. IMAPS Nordic, p. 86-91

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific