Projects per year
Personal profile
Expertise related to UN Sustainable Development Goals
In 2015, UN member states agreed to 17 global Sustainable Development Goals (SDGs) to end poverty, protect the planet and ensure prosperity for all. This person’s work contributes towards the following SDG(s):
Fingerprint
- 1 Similar Profiles
Collaborations and top research areas from the last five years
-
VOLTCAR: Design, manufacturing, and validation of ecocycle electric traction motor
Pippuri-Mäkeläinen, J. (Manager), Keränen, J. S. (Participant), Farzam Far, M. (Participant), Vehviläinen, M. (Participant), Manninen, A. (Participant), Pasanen, A. (Participant), Lindroos, T. (Participant), Räikkönen, M. (Participant), Kivikytö-Reponen, P. (Participant), Huang, X. (Participant), Haikkala, N. (Participant), Kinnunen, K. (Participant), Rahkola, P. (Participant), Selin, K. (Participant) & Vatanen, S. (Participant)
1/02/23 → 31/01/26
Project: EU project
-
HiECSs: High-Speed Electromechanical Energy Conversion Systems
Pippuri-Mäkeläinen, J. (Manager), Keränen, J. S. (Participant), Tahkola, M. (Participant), Farzam Far, M. (Participant), Lindroos, T. (Participant), Metsä-Kortelainen, S. (Participant), Vehviläinen, M. (Participant), Riipinen, T. (Participant), Manninen, A. (Participant) & Rahkola, P. (Participant)
1/01/22 → 31/12/26
Project: Academy of Finland project
-
REFLECTIVE: Reconfigurable Light Electric Vehicle
Pippuri-Mäkeläinen, J. (Manager), Keränen, J. S. (Participant), Farzam Far, M. (Participant) & Lumiaho, A. (Participant)
1/02/21 → 31/10/24
Project: EU project
-
ADDMAG: Multiscale Optimization of Additively Manufactured Magnetic Cores for Electrical Machines
Pippuri-Mäkeläinen, J. (Manager)
1/09/20 → 31/08/24
Project: Academy of Finland project
-
Arrowhead Tools: Arrowhead Tools for Engineering of Digitalisation Solutions
Halme, J. (Manager), Keränen, J. S. (Participant), Tahkola, M. (Participant), Pippuri-Mäkeläinen, J. (Participant) & Farzam Far, M. (Participant)
1/05/19 → 31/07/22
Project: EU project
-
3D Multibody Simulation of Realistic Rolling Bearing Defects for Fault Classifier Development
Vehviläinen, M., Tahkola, M., Keränen, J., El Bouharrouti, N., Rahkola, P., Halme, J., Pippuri-Mäkeläinen, J. & Belahcen, A., Oct 2024, 2024 International Conference on Electrical Machines, ICEM 2024. IEEE Institute of Electrical and Electronic Engineers, 7 p.Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
-
Analysis of Pulsating Magnetic Fields in a Parallel Stator Winding Eccentric Rotor Induction Motor
Kumar, G., Kalita, K., Tammi, K., Kumar, P., Pippuri-Mäkeläinen, J. & Banerjee, A., 1 Feb 2024, In: IEEE Transactions on Magnetics. 60, 2, 16 p., 8200216.Research output: Contribution to journal › Article › Scientific › peer-review
2 Citations (Scopus) -
Lessons Learnt - Development Of Additive Manufacturing For Soft Magnetic Electric Motor Components
Lindroos, T., Kinos, T., Antikainen, A., Riipinen, T., Manninen, A., Bertinetti, A., Odden, J. O. & Pippuri-Mäkeläinen, J., 30 Sept 2024, Euro PM2024 Proceedings. European Powder Metallurgy Association (EPMA)Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
-
Robust Development of Active Learning-based Surrogates for Induction Motor
Keränen, J., Tahkola, M., Råback, P., Gonzalez, A., Mukherjee, V. & Pippuri-Mäkeläinen, J., 1 Mar 2024, In: IEEE Transactions on Magnetics. 60, 3, p. 1-4 4 p., 8201404.Research output: Contribution to journal › Article › Scientific › peer-review
Open AccessFile1 Citation (Scopus)42 Downloads (Pure) -
Additive manufacturing of electric motors
Riipinen, T., Pippuri-Mäkeläinen, J. & Manninen, A., 1 Sept 2023, In: Advanced Materials and Processes. 181, 6, p. 17-19 3 p.Research output: Contribution to journal › Article › Scientific › peer-review
Prizes
-
Best Paper Award - PEMD 2023
Manninen, A. (Recipient), Pippuri-Mäkeläinen, J. (Recipient), Riipinen, T. (Recipient), Keränen, J. S. (Recipient), Metsä-Kortelainen, S. (Recipient) & Lindroos, T. (Recipient), 2023
Prize: Prize for a work