No photo of Jukka Ranta

Jukka Ranta

  • Phone+358407094501
1977 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020

Predictors of Access to Rehabilitation in the Year Following Traumatic Brain Injury: A European Prospective and Multicenter Study

Jacob, L., Cogné, M., Tenovuo, O., Røe, C., Andelic, N., Majdan, M., Ranta, J., Ylen, P., Dawes, H. & Azouvi, P., 2020, (Accepted/In press) In : Neurorehabilitation and Neural Repair.

Research output: Contribution to journalArticleScientificpeer-review

2017

Advancing Open Innovation in Data-Driven Preventive Healthcare

Iivari, M., Pikkarainen, M., Ylén, P., Francis Gomes, J. & Ranta, J., 2017.

Research output: Contribution to conferenceConference articleScientificpeer-review

Predictive Health Technology and Policy Assessment of Socioeconomic Impacts

Ranta, J., Jokinen, T. & Ylén, P., 1 Jan 2017, EMBEC and NBC 2017 - Joint Conference of the European Medical and Biological Engineering Conference EMBEC 2017 and the Nordic-Baltic Conference on Biomedical Engineering and Medical Physics, NBC 2017. Eskola, H., Vaisanen, O., Viik, J. & Hyttinen, J. (eds.). Springer, Vol. 65. p. 1081-1084 4 p. (IFMBE Proceedings, Vol. 65).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

System dynamics-modelling as a tool to foster innovation orchestration in the context of data-driven policy making

Pikkarainen, M., Iivari, M., Francis Gomes, J., Ylén, P., Ranta, J. & Hurmelinna-Laukkanen, P., 2017, Proceedings of the ISPIM Innovation Summit . International Society for Professional Innovation Management ISPIM

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2014

CORSICA 2013 work report: Test set generation, FPGA model checking, and fault injection

Lahtinen, J., Ranta, J. & Lötjönen, L., 2014, Espoo: VTT Technical Research Centre of Finland. 49 p. (VTT Research Report, Vol. VTT-R-00212-14).

Research output: Book/ReportReport

Open Access

Modelling and simulating complicated service networks in healthcare

Ylen, P., Koivula, O., Tuovinen, J. & Ranta, J., 2014, Serviceology for Service: Selected papers of the 1st International Conference of Serviceology. Mochimaru, M., Ueda, K. & Takenaka, T. (eds.). Tokio: Springer, p. 143-150

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

2013

Coverage and rationality of the software I&C safety assurance (CORSICA)

Lahtinen, J., Lötjönen, L., Nevalainen, R., Ranta, J. & Varkoi, T., 2013, SAFIR2014: The Finnish Research Programme on Nuclear Power Plant Safety 2011-2014: Interim Report. Espoo: VTT Technical Research Centre of Finland, p. 39-50 (VTT Technology; No. 80).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Kohti asiakaslähtöisiä hyvinvointipalveluita: Työpaja toimijoista muutoksen takaajina

Kivisaari, S., Kohl, J., Tuovinen, J., Ylén, P., Ranta, J. & Leväsluoto, J., 2013, VTT Technical Research Centre of Finland. 13 p. (Kurkiaura Policy Brief; No. Policy Brief II).

Research output: Book/ReportReport

Open Access

Kohti asiakaslähtöisiä hyvinvointipalveluja

Kivisaari, S., Kohl, J., Tuovinen, J., Ranta, J., Leväsluoto, J. & Ylén, P., 2013, VTT Technical Research Centre of Finland. 9 p. (Kurkiaura Policy Brief; No. Policy Brief III).

Research output: Book/ReportReport

Open Access

Kurkiauran tie käytännöiksi: Strada-hankkeen I työpajan tulosten analyysi

Kivisaari, S., Kohl, J., Tuovinen, J., Ranta, J., Leväsluoto, J. & Ylén, P., 2013, VTT Technical Research Centre of Finland. 9 p. (Kurkiaura Policy Brief; No. Policy Brief I).

Research output: Book/ReportReport

Open Access

Use of field-programmable gate arrays in nuclear I&C safety systems : Case stepwise shutdown system

Lötjönen, L., Ranta, J., Lahtinen, J., Valkonen, J. & Holmberg, J-E., 2013, Proceedings of the AutomaatioXX seminar: Publication series of FSA No. 42. Finnish Society of Automation, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Virusten detektio ja hallintakeinot prosessiympäristöissä

Rättö, M., Tsitko, I., Miettinen, H., Salo, S., Maunula, L., Rönnqvist, M., Tuominen, P., Mikkelä, A. & Ranta, J., 2013, VTT Technical Research Centre of Finland. (VTT Tutkimusraportti; No. VTT-R-02609-13).

Research output: Book/ReportReport

Virusten hallinta on kurinalaista toimintaa

Rättö, M., Tsitko, I., Miettinen, H., Salo, S., Maunula, L., Rönnqvist, M., Tuominen, P., Mikkelä, A. & Ranta, J., 2013, In : Kehittyvä elintarvike. 5, p. 20-22 3 p.

Research output: Contribution to journalArticleProfessional

Open Access
2012

The current state of FPGA technology in the nuclear domain

Ranta, J., 2012, Espoo: VTT Technical Research Centre of Finland. 67 p. (VTT Technology; No. 10).

Research output: Book/ReportReport

Open Access
2011

Certification Facilities for Software (CERFAS): CERFAS summary report

Harju, H., Lahtinen, J., Ranta, J. & Nevalainen, R., 2011, SAFIR2010: The Finnish Research Programme on Safety 2007-2010: Final Report. Espoo: VTT Technical Research Centre of Finland, p. 66-76 (VTT Tiedotteita - Research Notes; No. 2571).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

Certification Facilities for Software (CERFAS): Certification facilities for software: Evaluation by Safety Case Templates

Harju, H., Lahtinen, J., Ranta, J. & Nevalainen, R., 2011, SAFIR2010: The Finnish Research Programme on Safety 2007-2010: Final Report. Espoo: VTT Technical Research Centre of Finland, p. 77-86 (VTT Tiedotteita - Research Notes; No. 2571).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

Model-based analysis of an automated changeover switching unit for a busbar: MODSAFE 2009 work report

Björkman, K., Valkonen, J. & Ranta, J., 2011, Espoo: VTT Technical Research Centre of Finland. 24 p. (VTT Working Papers; No. 177).

Research output: Book/ReportReport

Open Access

Model-based Safety Evaluation of Automation Systems (MODSAFE): MODSAFE summary report

Valkonen, J., Björkman, K., Lahtinen, J., Ranta, J., Frits, J., Heljanko, K. & Niemelä, I., 2011, SAFIR2010: The Finnish Research Programme on Safety 2007-2010: Final Report. Espo: VTT Technical Research Centre of Finland, p. 55-65 (VTT Tiedotteita - Research Notes; No. 2571).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

Simulation of effects of alternative strategies in health care services: The dynamics of lung cancer

Ranta, J., Ylén, P. & Jaakkola, K., 2011, VTT Symposium on Service Innovation. Espoo: VTT Technical Research Centre of Finland, p. 231-241 (VTT Symposium; No. 271).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
2010

Comparison between IEC 60880 and IEC 61508 for Certification Purposes in the Nuclear Domain

Lahtinen, J., Johansson, M., Ranta, J., Harju, H. & Nevalainen, R., 2010, Computer Safety, Reliability, and Security: 29th International Conference, SAFECOMP 2010, Vienna, Austria, September 14-17, 2010. Proceedings. Berlin Heidelberg: Springer, p. 55-67

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleScientificpeer-review

13 Citations (Scopus)

Software safety standards for the basis of certification in the nuclear domain

Harju, H., Lahtinen, J., Ranta, J., Nevalainen, R. & Johansson, M., 2010, Proceedings of the Seventh International Conference on the Quality of Information and Communications Technology, QUATIC 2010. Los Alamitos, CA, USA: IEEE Institute of Electrical and Electronic Engineers, p. 54-62

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

4 Citations (Scopus)

Verification of automated changeover swithcing unit by model checking

Björkman, K., Valkonen, J. & Ranta, J., 2010, Proceedings of 7th International Topical Meeting on Nuclear Plant Instrumentation, Control and Human-Machine Interface Technologies, NPIC & HMIT 2010. LaGrange, Park, Illinois: American Nuclear Society ANS, Vol. 3. p. 1719-1728

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
2 Citations (Scopus)
2009

Certification facilities for software (CERFAS): CERFAS summary report

Harju, H., Lahtinen, J. & Ranta, J., 2009, SAFIR2010: The Finnish Research Programme on Nuclear Power Plant Safety 2007-2010: Interim Report. Espoo: VTT Technical Research Centre of Finland, p. 71-83 (VTT Tiedotteita - Research Notes; No. 2466).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access
2008

Use of results of microbiological analyses for risk-based control of Listeria monocytogenes in marinated broiler legs

Aarnisalo, K., Vihavainen, E., Rantala, L., Maijala, R., Suihko, M-L., Hielm, S., Tuominen, P., Ranta, J. & Raaska, L., 2008, In : International Journal of Food Microbiology. 121, 3, p. 275 - 284 10 p.

Research output: Contribution to journalArticleScientificpeer-review

9 Citations (Scopus)
2006

Software qualification: Error types and error management in software life-cycles (QETES)

Harju, H., Ranta, J. & Välisuo, M., 2006, SAFIR: The Finnish Research Programme on Nuclear Power Plant Safety 2003-2006: Final Report. Espoo: VTT Technical Research Centre of Finland, p. 290-299 (VTT Tiedotteita - Research Notes; No. 2363).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access
2005

Ennakoiva simulointi titaanidioksidin tuotannon ohjauksessa

Ranta, J., Valkonen, J., Tamminen, T., Laitinen, J., Harju, I. & Hämäläinen, J., 2005, Automaatio 05. Helsinki: Finnish Society of Automation, p. 43-48

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

1999

Workload balancing in the manufacturing environment: A multicriteria trade-off analysis

Kuula, M., Stam, A., Leino, S., Ranta, J. & Wallenius, J., 1999, In : International Journal of Production Research. 37, 7, p. 1459-1477

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)
1998

Verkostojen vallankumous: Miten johtaa verkostoyritystä?

Ollus, M. (ed.), Ranta, J. (ed.) & Ylä-Anttila, P. (ed.), 1998, Vantaa: Taloustieto oy. 172 p. (SITRA. Suomen itsenäisyyden juhlavuoden 1967 rahasto., Vol. 202).

Research output: Book/ReportReport

Yritysverkostot: kilpailua tiedolla, nopeudella ja joustavuudella

Ollus, M. (ed.), Ranta, J. (ed.) & Ylä-Anttila, P. (ed.), 1998, Vantaa: Taloustieto oy. 134 p. (SITRA. Suomen itsenäisyyden juhlavuoden 1967 rahasto., Vol. 201).

Research output: Book/ReportReport

1994

Evolution and Diffusion of Advanced Manufacturing Systems

Ranta, J., 1994, Organization and Management of Advanced Manufacturing. Karwowski, W. & Salvendy, G. (eds.). p. 29-59

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleScientificpeer-review

Uusi teollinen Suomi

Ranta, J., Ollus, M., Eloranta, E. & Suvanto, P., 1994, Porvoo: WSOY. 136 p. (SITRA. Suomen itsenäisyyden juhlavuoden 1967 rahasto., Vol. 137).

Research output: Book/ReportBook (author)

1993

On the dynamics and evolution of production paradigms: A study of the shifting rationality and advantages in the manufacturing industries

Ranta, J., 1993, Helsinki: SITRA. 85 p. (SITRA. Suomen itsenäisyyden juhlavuoden 1967 rahasto., Vol. 130).

Research output: Book/ReportBook (author)

Towards a new system concept in the paper production automation

Smolander, A., Kallela, J., Ollus, M. & Ranta, J., 1993, CIM in process and manufacturing industries: IFAC Workshop. Leiviskä, K. (ed.). Oxford: Pergamon Press, p. 85-88

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Workload balancing in the manufacturing environment: A multicriteria tradeoff analysis

Kuula, M., Stam, A., Leino, S. & Ranta, J., 1993, Helsinki. 43 p. (Helsingin kauppakorkeakoulu. F Työpapereita, Vol. 307).

Research output: Book/ReportBook (author)

1992

A non-linear multi-criteria model for strategic FMS selection decisions

Kuula, M., Stam, A. & Ranta, J., 1992, In : Journal of Multi-Criteria Decision Analysis. 1, 3, p. 165-184 20 p.

Research output: Contribution to journalArticleScientificpeer-review

Information technology and structural change in the paper and pulp industry: Some technological, organizational and managerial implications

Ranta, J., Ollus, M. & Leppänen, A., 1992, In : Computers in Industry. 20, 3, p. 255-269 15 p.

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)

Information technology in the industrial production: Managing the structural change and the new way to compete

Ranta, J., 1992. 17 p.

Research output: Contribution to conferenceConference articleScientific

1991

Costs, benefits, user characteristics and successful implementation strategies of flexible manufacturing systems: An international comparison and survey

Ranta, J. & Tchijov, J., 1991, Computer-integrated Manufacturing: perspectives for international economic development and competitiveness. Geneve: United nations, p. 83-103

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Flexible metal-working technologies

Ayres, R., Ranta, J. & Warnecke, H-J., 1991, Computer Integrated Manufacturing: The Past, the Present and the Future. Ayres, R. U., Merchant, M. E. & Ranta, J. (eds.). London, Vol. 2. p. 95-109

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Flexible Technologies in Manufacturing

Ranta, J., 1991, Computer Integrated Manufacturing: The Past, the Present and the Future. Ayres, R. U., Merchant, M. E. & Ranta, J. (eds.). London, Vol. 2. p. 1-11

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

The technical perspective and outlook

Ebel, K-H. & Ranta, J., 1991, Computer Integrated Manufacturing: The Past, the Present and the Future. Ayres, R. U., Merchant, M. E. & Ranta, J. (eds.). London, Vol. 2. p. 183-197

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

The Technology Push: Electronics, Computers and Communication

Ranta, J., 1991, Computer Integrated Manufacturing: The Past, the Present and the Future. Ayres, R. U., Merchant, M. E. & Ranta, J. (eds.). London, Vol. 2. p. 43-59

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Economics and Success Factors of Flexible Manufacturing Systems: The Conventional Explanation Revisited

Ranta, J. & Tchijov, J., 1990, In : International Journal of Flexible Manufacturing Systems. 2, 3, p. 169-190

Research output: Contribution to journalArticleScientificpeer-review

46 Citations (Scopus)

Issues and Problems of Flexible Paper Production

Ranta, J., Ollus, M. & Leppänen, A., 1990, Control Systems 90: From loop control to business control. Helsinki, 12. (Suomen säätöteknillinen seura. Julkaisu, Vol. 15).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Tuotannonohjauksella käytännön joustavuutta

Ranta, J., 1990, In : Suomen Materiaalitalous. 26, 7-8, p. 30-32

Research output: Contribution to journalArticleProfessional

1989

Joustavat valmiusjärjestelmät yleistyvät nopeasti

Ranta, J., 1989, In : Tekniikan näköalat. 4, p. 6-8

Research output: Contribution to journalArticleProfessional

Joustavuus, joustavat tuotantojärjestelmät ja teollisuuden rakennemuutos

Ranta, J., 1989, In : TTT katsaus. 17, 3, p. 83-94

Research output: Contribution to journalArticleProfessional

The impact of electronics and information technology on the future trends and application of CIM technologies

Ranta, J., 1989, In : Technological Forecasting and Social Change. 35, 2-3, p. 231-260

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

Tomorrow's industries structural changes and the need for work organizations: Options, possibilities and a new way to compete

Ranta, J., 1989, Människan i komplexa system: Nordisk människa-maskinkonferens. Espoo: VTT Technical Research Centre of Finland, p. 303-330 (VTT Symposium; No. 106).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review