No photo of Kimmo Ruusuvuori

Kimmo Ruusuvuori

19992017
If you made any changes in Pure these will be visible here soon.

Research Output 1999 2017

2017
Melting
Lasers
Machining
Tool steel
Design of experiments
2016

3D Printing of Soft Magnetic Cores For Electrical Machines

Pippuri, J., Metsä-Kortelainen, S., Lindroos, T., Savolainen, M., Jokinen, A., Revuelta, A., Pasanen, A. & Ruusuvuori, K., 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. Aaltonen, J., Virkkunen, R., Koskinen, K. T. & Kuivanen, R. (eds.). Tampere University of Technology, p. 48-51 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access
3D printers
Magnetic cores
Printing
Machine design
Steel sheet
Open Access
Open Access
Magnetic cores
Printing
Melting
Topology
Lasers
20 Citations (Scopus)

Optimization and simulation of SLM process for high density H13 tool steel parts

Laakso, P., Riipinen, T., Laukkanen, A., Andersson, T., Jokinen, A., Revuelta, A. & Ruusuvuori, K., 2016, Physics Procedia. Elsevier, Vol. 83. p. 26-35

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
Tool steel
Melting
Lasers
Hatches
High strength steel

Suunnittelun avulla enemmän lisäarvoa 3D-tulostukseen: Case venttiililohko

Laakso, P., Komi, E., Puukko, P., Kokkonen, P., Ruusuvuori, K., Jokinen, A. & Savolainen, M., 2016, In : Hitsaustekniikka. 66, 1, p. 18-20

Research output: Contribution to journalArticleProfessional

2015
14 Citations (Scopus)

High temperature corrosion of thermally sprayed NiCr and FeCr coatings covered with a KCl-K2SO4 salt mixture

Varis, T., Bankiewicz, D., Yrjas, P., Oksa, M., Suhonen, T., Tuurna, S., Ruusuvuori, K. & Holmström, S., 2015, In : Surface and Coatings Technology. 265, p. 235-243

Research output: Contribution to journalArticleScientificpeer-review

sprayed coatings
corrosion
biomass
Salts
Sprayed coatings
2014

Material challenges in the manufacturing of tailored structures with direct write technologies

Metsä-Kortelainen, S., Ronkainen, H., Varis, T., Ruusuvuori, K., Roozeman, R., Vehmas, T., Kupiainen, V., Ahlroos, T., Lagerbom, J. & Suhonen, T., 2014, Materials Challenges and Testing for Manufacturing, Mobility, Biomedical Applications and Climate. Udomkichdecha, W., Böllinghaus, T., Manonukul, A. & Lexow, J. (eds.). Springer, p. 57-66

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Thermal spraying
Molten materials
Powders
Substrates
Hot Temperature
6 Citations (Scopus)

Performance testing of iron based thermally sprayed HVOF coatings in a biomass-fired fluidised bed boiler

Oksa, M., Varis, T. & Ruusuvuori, K., 2014, In : Surface and Coatings Technology. 251, p. 191-200 10 p.

Research output: Contribution to journalArticleScientificpeer-review

boilers
biomass
Boilers
beds
Biomass
2013
1 Citation (Scopus)

Materials for electronics by thermal spraying

Ronkainen, H., Kanerva, U., Varis, T., Ruusuvuori, K., Turunen, E., Peräntie, J., Putaala, J., Juuti, J. & Jantunen, H., 2013, Physical and numerical simulation of materials processing VII. Karjalainen, L. P., Porter, D. A. & Järvenpää, S. A. (eds.). Trans Tech Publications, p. 451 - 456 (Materials Science Forum, Vol. 762).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Thermal spraying
Aluminum Oxide
Electronic equipment
Coatings
Powders
1 Citation (Scopus)

Miniature plasma sprayed strain gauges for torque sensing

Tervo, J., Vuorio, J., Paro, J., Ruusuvuori, K. & Ronkainen, H., 2013, In : Powder Metallurgy. 56, 5, p. 335-336 1 p.

Research output: Contribution to journalArticleScientificpeer-review

strain gages
Strain gages
torque
Torque
Plasmas
3 Citations (Scopus)

Surface embedded temperature sensor on tool part for real time injection moulding process monitoring

Schonberg, T., Ruusuvuori, K., Christensen, B. H., Boivie, K., Berild, J. P., Ronkainen, H. & Gellein, R. T., 2013, Proceedings: Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems, Transducers and Eurosensors XXVII, 2013. Institute of Electrical and Electronic Engineers IEEE, p. 116-119

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Process monitoring
Temperature sensors
Injection molding
Polymers
Thermocouples
2012

Miniature plasma sprayed strain gauges for torque sensing

Tervo, J., Vuorio, J., Paro, J., Ruusuvuori, K. & Ronkainen, H., 2012, Proceedings of Euro PM 2012. UK: European Power Metallurgy Association EPMA

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Strain gages
Torque
Plasmas
Gages
Plasma spraying

Plasmaruiskutus sulautettujen anturien valmistusmenetelmänä

Tervo, J., Paro, J., Ruusuvuori, K., Ronkainen, H. & Vuorio, J., 2012, In : Promaint. 26, 1, p. 50-53 4 p.

Research output: Contribution to journalArticleProfessional

2011
4 Citations (Scopus)

Optimised selection of new protective coatings for biofuel boiler applications

Tuurna, S., Varis, T., Penttilä, K., Ruusuvuori, K., Holmström, S. & Yli-Olli, S., 2011, In : Materials and Corrosion. 62, 7, p. 642-649 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Biofuels
Protective coatings
biofuel
Boilers
coating

Thermally sprayed coatings protecting biomass fired FB boiler

Oksa, M., Varis, T., Suhonen, T., Ruusuvuori, K., Tuurna, S. & Holmström Stefan, 2011, Proceedings of EUROCORR 2011: European Federation of Corrosion. Curran Associates Inc., Vol. 1. p. 2395-2401 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

2010

Fireside corrosion of superheater materials in oxyfuel combustion

Pohjanne, P., Yli-Olli, S., Auerkari, P., Tuurna, S., Jauhiainen, P., Turunen, E., Varis, T., Ruusuvuori, K. & Mäkipää, M., 2010, Proceedings of the Corrosion 2010 Conference and Expo. Houston, TX, p. 2438-2451 10200

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

High temperature corrosion of thermally sprayed NiCr- and amorphous Fe-based coatings covered with a KCl-K2SO4 salt mixture

Varis, T., Bankiewicz, D., Yrjas, P., Suhonen, T., Tuurna, S., Ruusuvuori, K., Holmström, S. & Salonen, J., 2010, Materials for advanced power engineering 2010: Proceedings of the 9th Liege Conference on Materials for Advanced Power Engineering, September 27-29th, 2010, Liège, Belgium. Lecomte-Beckers, J., Contrepois, Q., Beck, T. & Kuhn, B. (eds.). p. 846-856 (Schriften des Forschungszentrums Jülich: Reihe Energie & Umwelt/Energy & Environment, Vol. 94).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Managing corrosion in biomass boilers: Benefits and limitations of coatings

Tuurna, S., Varis, T., Ruusuvuori, K., Holmström, S., Salonen, J., Auerkari, P., Kinnunen, T., Yrjas, P., Finne, R., Nupponen, M., McNiven, U., Ahonen, H. & Kapulainen, A., 2010, Baltica VIII: Life Management and Maintenance for Power Plants. Espoo: VTT Technical Research Centre of Finland, Vol. 2. p. 22-36 (VTT Symposium; No. 265).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access
Boilers
Biomass
Corrosion
Coatings
Sprayed coatings
2008

The effect of thermal history on properties of WC-CoCr coatings

Varis, T., Suhonen, T., Ruusuvuori, K. & Turunen, E., 2008, Proceedings of the International Thermal Spray Conference and Exposition, ITSC 2008 . DVS Verlag, p. 1042-1044

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2005

Controlled HVOF hard coating removal method

Ruusuvuori, K., Oksa, M., Turunen, E., Lahdenperä, K., Kauppila, J. & van Wonderen, M., 2005, Proceedings of the 2005 WJTA American Waterjet Conference. Houston, Texas, 10 p. Paper 5B-2

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
Hard coatings
Coatings
Abrasives
Water
Eddy currents

Controlled removal of HVOF hard coatings by abrasive water jet

Ruusuvuori, K., Lahdenperä, K., Oksa, M., Turunen, E. & Lundberg, R., 2005, Thermal Spray Connects: Explore its Surfacing Potential: Proceedings, International Thermal Spray Conference and Exposition (ITSC 2005). Basel, Switzerland, 2-4 May 2005. Dusseldorf, Germany: DVS Verlag

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

2003

Functionally graded HVOF sprayed NiCr-Al2O3 coatings for demanding applications

Turunen, E., Varis, T., Ruusuvuori, K., Gustafsson, T. E., Hannula, S-P., Antila, E. & Gasik, M., 2003, Proceedings of the International Thermal Spray Conference, ITSC 2003. ASM International, Vol. 2. p. 1531 - 1534

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2002

Menetelmä ja materiaali raskasmetallien erottamiseksi jätevedestä: Förfarande och material för separering av tungmetaller från spillvatten

Mahiout, A., Koskinen, J., Lahtinen, R., Ruusuvuori, K., Siivinen, J., Pirkonen, P., Mursunen, H. & Heikkinen, J., 29 Sep 2002, IPC No. C02F 1/ 62 A I, Patent No. FI20020598, Priority date 28 Mar 2002, Priority No. FI20020000598

Research output: PatentPatent

1999

Kromatoinnilla kestävyyttä sinkitylle teräsohutlevylle

Ruusuvuori, K. & Hilden, J., 1999, In : Kunnossapito. 13, 8, p. 6-11

Research output: Contribution to journalArticleProfessional