No photo of Markku Järviluoma

Markku Järviluoma

  • Phone+358408208919
19882013

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2013

Extending automation of building construction: Survey on potential sensor technologies and robotic applications

Vähä, P., Heikkilä, T., Kilpeläinen, P., Järviluoma, M. & Gambao, E., 2013, In : Automation in Construction. 36, p. 168-178 10 p.

Research output: Contribution to journalArticleScientificpeer-review

76 Citations (Scopus)

Low intrusive ehealth monitoring: Human posture and activity level detection with an intelligent furniture network

Heikkilä, T., Strömmer, E., Kivikunnas, S., Järviluoma, M., Korkalainen, M., Kyllönen, V., Sarjanoja, E-M. & Peltomaa, I., 2013, In : IEEE Wireless Communications. 20, 4, p. 57-63 6 p.

Research output: Contribution to journalArticleScientificpeer-review

9 Citations (Scopus)

Survey on automation of the building construction and building products industry

Pentti, V., Heikkilä, T., Kilpeläinen, P., Järviluoma, M. & Heikkilä, R., 2013, Espoo: VTT Technical Research Centre of Finland. 86 p. (VTT Technology; No. 109).

Research output: Book/ReportReport

Open Access
2011

Towards intelligent environments: Human posture and activity monitoring in furniture with wireless low cost sensors

Heikkilä, T., Järviluoma, M., Strömmer, E., Kivikunnas, S., Korkalainen, M. & Kyllönen, V., 2011, p. 31-36.

Research output: Contribution to conferenceConference articleScientific

34 Citations (Scopus)

Vuorovaikutteisen 3D mittausjärjestelmän CAD-perusteinen ohjelmointi ja liittäminen robotin ohjaukseen

Heikkilä, T., Ahola, J. M., Viljamaa, E. & Järviluoma, M., 2011.

Research output: Contribution to conferenceConference articleProfessional

2010

An interactive 3D sensor system and its programming for target localizing in robotics applications

Heikkilä, T., Ahola, J. M., Viljamaa, E. & Järviluoma, M., 2010, Proceedings of the IASTED International Conference Robotics 2010, Robo 2010. p. 89-96

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
5 Citations (Scopus)
2007

Data reduction using random sampling in wireless vibration measurement

Määttä, K. & Järviluoma, M., 2007, Proceedings: Workshop on Digital Alias-free Signal Processing, WDASP 07 . p. 40-44

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

SULAROTOR - Intelligent control of resonance vibration of industrial rotors

Tammi, K. & Järviluoma, M., 2007, Intelligent Products and Systems: Technology theme – Final report. Ventä, O. (ed.). Espoo: VTT Technical Research Centre of Finland, p. 227-239 (VTT Publications; No. 635).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access
2004

A robotized system for prototype manufacturing of castings with various sizes of pieces

Sallinen, M., Järviluoma, M., Sirviö, M., Väinölä, J. & Ruusu, R., 2004, Proceedings of the 5th International Conference on Machine Automation ICMA 2004. p. 517-522

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2003

ADAMS/Simulink simulation of active damping of a heavy roller

Järviluoma, M. & Kortelainen, J., 2003, VTT Technical Research Centre of Finland. 38 p. (VTT Research Report; No. BTUO57-031129).

Research output: Book/ReportReport

Open Access
2002

Värähtelyn ja melun vaimennuskeinot kulkuvälineissä ja liikkuvissa työkoneissa: Laskentaperiaatteita ja käyttöesimerkkejä

Hentinen, M., Hynnä, P., Lahti, T., Nevala, K., Vähänikkilä, A. & Järviluoma, M., 2002, Espoo: VTT Technical Research Centre of Finland. 286 p. (VTT Tiedotteita - Research Notes; No. 2160).

Research output: Book/ReportReport

Open Access
1 Citation (Scopus)
2001

Modern design and active control methods in mobile machine vibration control

Järviluoma, M., Nevala, K. & Vessonen, I., 2001, Smart machines and systems: Recent advances in mechatronics in Finland. Espoo: Helsinki University of Technology, p. 187 - 212 (Helsinki University of Technology Publications in Machine Design; No. 1/2001).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Simulation based design of mobile machine vibration control and active cabin suspension prototype

Vessonen, I. & Järviluoma, M., 2001, Modelling and simulation of multitechnological machine systems. Espoo: VTT Technical Research Centre of Finland, p. 121-138 (VTT Symposium; No. 209).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
1 Citation (Scopus)
1999

Aktiivinen värähtelyn hallinta poistaa turhat tärinät

Translated title of the contribution: The active control of the vibration removes the unnecessary vibrationsNevala, K. & Järviluoma, M., 1999, In : Automaatioväylä. 4, p. 20-21

Research output: Contribution to journalArticleProfessional

Robot based surface inspection system with estimation of spatial uncertainties

Heikkilä, T., Sallinen, M. & Järviluoma, M., 1999, Intelligent Robots and Computer Vision XVIII: Algorithms, Techniques, and Active Vision. Bellingham, Washington: International Society for Optics and Photonics SPIE, p. 242-253 (Proceedings of SPIE, Vol. 3837).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

3 Citations (Scopus)

Robotized surface inspection with careful design of measurements

Sallinen, M., Heikkilä, T. & Järviluoma, M., 1999, Proceedings Scandinavian Symposium on Robotics 1999. p. 133-141

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

1997

Holonic control for manufacturing systems: Functional design of a manufacturing robot cell

Heikkilä, T., Järviluoma, M. & Juntunen, T., 1997, In : Integrated Computer-Aided Engineering. 4, 3, p. 202 - 218 17 p.

Research output: Contribution to journalArticleScientificpeer-review

23 Citations (Scopus)

Modelling the positioning accuracy of sensor-based robots

Järviluoma, M. & Heikkilä, T., 1997, Intelligent Robots and Computer Vision XVI: Algorithms, Techniques, Active Vision, and Materials Handling. International Society for Optics and Photonics SPIE, p. 540-550 (Proceedings of SPIE, Vol. 3208).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1 Citation (Scopus)

Servohydraulisen vastatäristimen mallinnus MATLAB-tilamallilla

Järviluoma, M. & Linjama, J., 1997, VTT Technical Research Centre of Finland. 2 p. (VALB; No. 130/1).

Research output: Book/ReportReport

1995

An ultrasonic multi-sensor system for object locating applications

Järviluoma, M. & Heikkilä, T., 1995, In : Mechatronics. 5, 4, p. 433-440

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)

An ultrasonic multi-sensor system for object locating applications

Järviluoma, M. & Heikkilä, T., 1995, In : Mechatronics. 5, 4, p. 433-440

Research output: Contribution to journalArticleScientificpeer-review

Holonic control of a manufacturing robot cell

Heikkilä, T., Järviluoma, M. & Hasemann, J-M., 1995, Proceedings of the 5th International FAIM Conference. Flexible Automation and Intelligent Manufacturing. p. 861-871

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Holoninen robottisolun ohjaus

Heikkilä, T., Järviluoma, M. & Hasemann, J-M., 1995, Automaatio 95. Finnish Society of Automation, p. 657-665

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

1994

Holoniset järjestelmät

Heikkilä, T. & Järviluoma, M., 1994. 11 p.

Research output: Contribution to conferenceConference articleProfessional

On the representation and propagation of uncertainty in position and orientation relations

Järviluoma, M. & Heikkilä, T., 1994, Proceedings of the SPRANN '94. p. 49-54

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Simulation studies on creating verified specifications for distributed control in manufacturing

Heikkilä, T., Järviluoma, M. & Juntunen, T., 1994, Proceedings of the 2nd CKBS Working Conference. 17 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

1993

An object locating method with uncertainties applied to an ultrasonic multi-sensor system

Heikkilä, T. & Järviluoma, M., 1993, In : Journal of Robotics and Mechatronics. 5, 2, p. 134 - 140 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
1992

Locating regular objects by an ultra-sonic multi-sensor system based on interactive estimation with uncertainty

Heikkilä, T., Järviluoma, M. & Voutilainen, O., 1992, Proceedings of the 2nd International Conference on Automation, Robots and Computer Vision, ICARCV '92.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

1991

Maintaining world model consistency by matching parametrized object models to 3D measurements

Järviluoma, M., Pieskä, S. & Heikkilä, T., 1991, Robotic Systems. Springer, p. 515-522 (Microprocessor-Based and Intelligent Systems Engineering, Vol. 10).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Planning of an active range sensor structure for pose estimation of 3-D regular objects

Marszalec, J., Järviluoma, M. & Heikkilä, T., 1991, Intelligent Robots and Computer Vision X: Neural, Biological, and 3-D Methods. International Society for Optics and Photonics SPIE, (Proceedings of SPIE, Vol. 1608).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1990

Dynamic range data acquisition and pose estimation for 3-D regular objects

Marszalec, J., Heikkilä, T. & Järviluoma, M., 1990, Intelligent Robots and Computer Vision IX: Neural, Biological, and 3D Methods. International Society for Optics and Photonics SPIE, (Proceedings of SPIE, Vol. 1382).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1989

Digital servo controller design using knowledgebased pole placement method

Yli-Niemi, J., Järviluoma, M., Leiviskä, K. & Vähä, P., 1989.

Research output: Contribution to conferenceConference articleScientific

1988

An intelligent hydraulic actuator for varying loads

Järviluoma, M., Nevala, K. & Parkkinen, R., 1988, Fluid Power 8. Heron, R. (ed.). Elsevier, p. 53-86

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review