Pertti Auerkari

  • Phone+358505666850
1977 …2019

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Book (editor)

BALTICA VII - Life Management and Maintenance for Power Plants. Vol. 2

Veivo, J. (ed.) & Auerkari, P. (ed.), 2007, Espoo: VTT Technical Research Centre of Finland. 241 p. (VTT Symposium; No. 247).

Research output: Book/ReportBook (editor)

Open Access

BALTICA VI - Life Management and Maintenance for Power Plants. Vol. 1

Veivo, J. (ed.) & Auerkari, P. (ed.), 2004, Espoo: VTT Technical Research Centre of Finland. 354 p. (VTT Symposium; No. 233).

Research output: Book/ReportBook (editor)

Open Access

BALTICA VI - Life management and maintenance for power plants. Vol. 2

Veivo, J. (ed.) & Auerkari, P. (ed.), 2004, Espoo: VTT Technical Research Centre of Finland. 354 p. (VTT Symposium; No. 234).

Research output: Book/ReportBook (editor)

Open Access
Open Access
Chapter or book article

Comparison of potential drop and unloading compliance methods in determining ductile crack extension

Wallin, K., Saario, T., Auerkari, P., Saarelma, H. & Törrönen, K., 1985, Elastic-Plastic Fracture Test Methods: The User's Experience. Wessel, E. T. & Loss, F. J. (eds.). Philadelphia: American Society for Testing and Materials ASTM, p. 363-374

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleScientificpeer-review

2 Citations (Scopus)

Creep, fatigue and microstructural degradation in gas turbine superalloys

Auerkari, P., 2011, Power plant life management and performance improvement. Oakey, J. E. (ed.). Woodhead Publishing, p. 307-329 (Woodhead publishing series in energy, Vol. 23).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Enhanced weld creep strength modelling based on parent material master curves Case: 9Cr steels

Holmström, S. & Auerkari, P., 2009, Pressure Vessels and Piping : Manufacturing and Performance. Raj, B., Choudhary, B. K. & Albert, S. K. (eds.). New Delhi, India, p. 271-280

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleScientific

Kaasuturbiinien materiaalit

Auerkari, P., 2002, Materiaalit energiatekniikan palveluksessa. KESTO-teknologiaohjelma 1997-2001. Loppuraportti. Helsinki: TEKES, p. 7-19 (Tekes. Teknologiaohjelmaraportti, Vol. 7).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Plant life and integrity assessment for asset management

Solin, J., Auerkari, P. & Rintamaa, R., 2005, Industrial Systems Review 2005. Kleemola, H. (ed.). VTT Technical Research Centre of Finland, p. 72-77 (Industrial systems review; No. 2005).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Practical determination of probability of failure in risk-based inspection and life management of coal power plants

Jovanovic, A., Auerkari, P. & Bareiss, J. M., 2014, Coal Power Plant Materials and Life Assessment: Developments and Applications. Cambridge, UK: Elsevier, p. 288-317 (Woodhead publishing series in energy, Vol. 62).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Tehokasta ja ennakoivaa kunnossapitoa ja eliniän hallintaa voima- ja prosessilaitoksille

Oksa, M., Auerkari, P. & Saarela, O., 2017, Teollinen internet uudistaa palveluliiketoimintaa ja kunnossapitoa. Helsinki: Kunnossapitoyhdistys Promaint ry., p. 194-201

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access
Conference Abstract

Assessing resilience in the energy supply sector

Tuurna, S., Auerkari, P., Molarius, R., Pohja, R., Jovanovic, A., Koivisto, R. & Hapuli, H., May 2019.

Research output: Contribution to conferenceConference AbstractProfessional

Risk and resilience assessment for an energy supply system

Pohja, R., Auerkari, P., Tuurna, S., Hapuli, H. & Jovanovic, A., 19 Jun 2018. 7 p.

Research output: Contribution to conferenceConference AbstractScientificpeer-review

Uncertainties, decision criteria and resilience to damage and failure of a heat exchanger

Auerkari, P., Pohja, R., Tuurna, S., Tuhti, A., Laaksonen, L. & McNiven, U., 2017.

Research output: Contribution to conferenceConference AbstractScientific

Conference abstract in proceedings

Creep and creep damage in copper under uniaxial/multiaxial loading

Auerkari, P., Holmström, S. & Salonen, J., 2003, Long-term Integrity of the KBS-3 Engineered Barrier System: Report from Worshop at Krägga Herrgård, Bålsta, Sweden 6-8 November 2002. Synthesis and Extended Abstracts. 3 p. (SKI Rapport; No. 29, Vol. 2003).

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Open Access

Experience on in-service damage in power plant components

Salonen, J., Auerkari, P., Lehtinen, O. & Pihkakoski, M., 2006, 2nd International Conference on Engineering Failure Analysis, ICEFA-II: Program & Abstracts . 08.1

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Life in plant - challenges and solutions

Auerkari, P., Salonen, J., Holmström, S., Viuhko, J. & Lokkiluoto, A., 2013, Baltica IX. International Conference on Life Management and Maintenance for Power Plants - Abstracts. Auerkari, P. & Veivo, J. (eds.). Espoo: VTT Technical Research Centre of Finland, p. 102 (VTT Technology; No. 107).

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Open Access

New model for steam oxidation of power plant steels

Yli-Olli, S., Holmström, S., Auerkari, P. & Penttilä, S., 2013, Baltica IX. International Conference on Life Management and Maintenance for Power Plants - Abstracts. Auerkari, P. & Veivo, J. (eds.). Espoo: VTT Technical Research Centre of Finland, p. 98 (VTT Technology; No. 107).

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Open Access

Performance of copper overpack for repository canisters

Rantala, J., Auerkari, P., Holmström, S., Laukkanen, A. & Andersson, T., 2013, Baltica IX. International Conference on Life Management and Maintenance for Power Plants - Abstracts. Auerkari, P. & Veivo, J. (eds.). Espoo: VTT Technical Research Centre of Finland, p. 56 (VTT Technology; No. 107).

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Open Access

Robust weld strength factor Prediction Case: P91 and X20 steels

Holmström, S. & Auerkari, P., 2010, First International Conference on Materials for Energy, Karlsruhe, Germany, July 4-8 2010: Extended Abstracts - Book A. Frankfurt am Main, Germany, p. 294-296

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Self-heating and autoignition of coal in rock silos

Sipilä, J., Auerkari, P., Holmström, S., Itkonen, J., Krause, U., Vela, I. & Löscher, M., 2013, Baltica IX. International Conference on Life Management and Maintenance for Power Plants - Abstracts. Auerkari, P. & Veivo, J. (eds.). Espoo: VTT Technical Research Centre of Finland, p. 44 (VTT Technology; No. 107).

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Open Access
Conference article

Accuracy requirements for life assessment

Auerkari, P. & Salonen, J., 1988. 13 p.

Research output: Contribution to conferenceConference articleScientific

Application of the replica technique in assessing the creep damage of high temperature components in Finnish power plants

Rintamaa, R., Auerkari, P. & Salonen, J., 1987. 15 p.

Research output: Contribution to conferenceConference articleScientific

Creep damage and long term life of steam line components: Case X20

Holmström, S., Auerkari, P., Salonen, J., Laukkanen, A., Rantala, J., Nikkari, R. & Junttanen, J., 2012. 16 p.

Research output: Contribution to conferenceConference articleScientific

Creep modelling for long-term low strain regime including the limit of negligible creep

Auerkari, P., Holmström, S., Pohja, R. & Rantala, J., 2017. 6 p.

Research output: Contribution to conferenceConference articleScientificpeer-review

Creep performance of OFP copper for the overpack of repository canisters

Rantala, J., Auerkari, P., Salonen, J., Holmström, S., Laukkanen, A. & Saukkonen, T., 2012.

Research output: Contribution to conferenceConference articleScientific

Energialaitosten suorituskyvyn parantamiseen tähtäävät materiaalitekniset tutkimukset VTT:ssa

Auerkari, P., Törrönen, K. & Forsten, J., 1982. 11 p.

Research output: Contribution to conferenceConference articleProfessional

European approach for considering creep of engineering materials under multiaxial stresses in design codes and for remanent life estimations of elevated temperature plant components

Hurst, R., Auerkari, P., Maile, K. & Balladon, P., 2004. 10 p.

Research output: Contribution to conferenceConference articleScientific

Flexible future of power plants - challenges and solutions

Tuurna, S., Auerkari, P., Pohja, R., McNiven, U., Lilja, M. & Rydl, O., 13 Mar 2018.

Research output: Contribution to conferenceConference articleProfessional

Fracture testing of silicate composites

Auerkari, P., Kumpulainen, J. & Wallin, K., 1987. 15 p.

Research output: Contribution to conferenceConference articleScientific

Influence of temperature and surface treatment on steamside oxidation

Tuurna, S., Yli-Olli, S., Auerkari, P., Coda Zabetta, E. & Vänskä, K., 2014. 11 p.

Research output: Contribution to conferenceConference articleScientificpeer-review

Intelligent software systems for inspection planning - the BE5935 project

Jovanovic, A., Auerkari, P., Kautz, H., Ellingsen, H. & Psomas, S., 1995. 19 p.

Research output: Contribution to conferenceConference articleScientific

Jäännöseliniän määrittämisen perusteet

Auerkari, P., 1986. 15 p.

Research output: Contribution to conferenceConference articleProfessional

Kannettavien kovuusmittarien vertailu

Translated title of the contribution: Comparison of portable hardness testersAuerkari, P., Kallio, H., Kaskinen, P., Sirviö, R. & Laukkanen, A., 1999. 11 p.

Research output: Contribution to conferenceConference articleProfessional

Kattilalaitoksen elinikätutkimukset

Auerkari, P., 1988. 9 p.

Research output: Contribution to conferenceConference articleProfessional

Keraamien testaus

Auerkari, P. & Kauppinen, P., 1987. 4 p.

Research output: Contribution to conferenceConference articleProfessional

Kokemuksia kattilalaitosten elinikätarkasteluista

Auerkari, P. & Lehtinen, O., 2004. 11 p.

Research output: Contribution to conferenceConference articleProfessional

Kuumien putkistojen kunnon määrittäminen

Auerkari, P., 1986. 14 p.

Research output: Contribution to conferenceConference articleProfessional

Models and methods for predicting creep life and creep strength of ferritic steels

Auerkari, P. & Holmström, S., 2004.

Research output: Contribution to conferenceConference articleScientificpeer-review

Practical aspects of applying risk-based approaches in asset management for power plant

Auerkari, P., Jovanovic, A., Husta, S., Pohja, R., Tuurna, S., Pohjanne, P., McNiven, U. & Laaksonen, L., 2017. 10 p.

Research output: Contribution to conferenceConference articleScientific

Predicted life of thick-wall P91 steel for cyclic high temperature service

Pohja, R., Holmström, S., Auerkari, P. & Nurmela, A., 2017.

Research output: Contribution to conferenceConference articleScientificpeer-review

Predicting creep life from small sets of test data and reference material characteristics

Holmström, S. & Auerkari, P., 2012.

Research output: Contribution to conferenceConference articleScientific

Progress in material technology: Opportunities to improve efficiency in energy production

Auerkari, P., Ehrnstén, U., Rintamaa, R. & Tuurna, S., 2011, p. 5.1 - 5.17.

Research output: Contribution to conferenceConference articleScientific

RBI and assessment of component life for high temperature service

Auerkari, P., Pohja, R., Yli-Olli, S., Tuurna, S., Pohjanne, P., McNiven, U. & Husta, S., 2016.

Research output: Contribution to conferenceConference articleScientific

Recent experiences on the non-destructive inspections of high temperature equipment

Auerkari, P., Sillanpää, J., Kauppinen, P. & Salonen, J., 1989. 10 p.

Research output: Contribution to conferenceConference articleScientific

Relation between creep damage, strain and residual life in power plant steam pipes

Auerkari, P. & Vierros, P., 1987. 9 p.

Research output: Contribution to conferenceConference articleScientific

Risk and resilience assessment for an urban system of energy supply

Molarius, R., Auerkari, P., Koivisto, R., Tuurna, S., Pohja, R., Jovanovic, A. & Hapuli, H., 30 Oct 2018. 13 p.

Research output: Contribution to conferenceConference articleProfessional

Risk of failure incidents in plant - experience and examples

Auerkari, P., 2003. 9 p.

Research output: Contribution to conferenceConference articleScientific

Survey of RIMAP project: practical application of the concept and methodology to components in power plants

Jovanovic, A. S. & Auerkari, P., 2004.

Research output: Contribution to conferenceConference articleScientificpeer-review

Suunnittelu ja todellinen elinikä

Auerkari, P., 1986. 13 p.

Research output: Contribution to conferenceConference articleProfessional