Pertti Auerkari

  • Phone+358505666850
1977 …2019

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference article
2018

Flexible future of power plants - challenges and solutions

Tuurna, S., Auerkari, P., Pohja, R., McNiven, U., Lilja, M. & Rydl, O., 13 Mar 2018.

Research output: Contribution to conferenceConference articleProfessional

Risk and resilience assessment for an urban system of energy supply

Molarius, R., Auerkari, P., Koivisto, R., Tuurna, S., Pohja, R., Jovanovic, A. & Hapuli, H., 30 Oct 2018. 13 p.

Research output: Contribution to conferenceConference articleProfessional

2017

Creep modelling for long-term low strain regime including the limit of negligible creep

Auerkari, P., Holmström, S., Pohja, R. & Rantala, J., 2017. 6 p.

Research output: Contribution to conferenceConference articleScientificpeer-review

Practical aspects of applying risk-based approaches in asset management for power plant

Auerkari, P., Jovanovic, A., Husta, S., Pohja, R., Tuurna, S., Pohjanne, P., McNiven, U. & Laaksonen, L., 2017. 10 p.

Research output: Contribution to conferenceConference articleScientific

Predicted life of thick-wall P91 steel for cyclic high temperature service

Pohja, R., Holmström, S., Auerkari, P. & Nurmela, A., 2017.

Research output: Contribution to conferenceConference articleScientificpeer-review

2016

RBI and assessment of component life for high temperature service

Auerkari, P., Pohja, R., Yli-Olli, S., Tuurna, S., Pohjanne, P., McNiven, U. & Husta, S., 2016.

Research output: Contribution to conferenceConference articleScientific

2014

Influence of temperature and surface treatment on steamside oxidation

Tuurna, S., Yli-Olli, S., Auerkari, P., Coda Zabetta, E. & Vänskä, K., 2014. 11 p.

Research output: Contribution to conferenceConference articleScientificpeer-review

2012

Creep damage and long term life of steam line components: Case X20

Holmström, S., Auerkari, P., Salonen, J., Laukkanen, A., Rantala, J., Nikkari, R. & Junttanen, J., 2012. 16 p.

Research output: Contribution to conferenceConference articleScientific

Creep performance of OFP copper for the overpack of repository canisters

Rantala, J., Auerkari, P., Salonen, J., Holmström, S., Laukkanen, A. & Saukkonen, T., 2012.

Research output: Contribution to conferenceConference articleScientific

Predicting creep life from small sets of test data and reference material characteristics

Holmström, S. & Auerkari, P., 2012.

Research output: Contribution to conferenceConference articleScientific

2011

Progress in material technology: Opportunities to improve efficiency in energy production

Auerkari, P., Ehrnstén, U., Rintamaa, R. & Tuurna, S., 2011, p. 5.1 - 5.17.

Research output: Contribution to conferenceConference articleScientific

2005

VTT experience with the life assessment of P91 components

Auerkari, P., Holmström, S., Salonen, J. & Rantala, J., 2005.

Research output: Contribution to conferenceConference articleScientific

2004

European approach for considering creep of engineering materials under multiaxial stresses in design codes and for remanent life estimations of elevated temperature plant components

Hurst, R., Auerkari, P., Maile, K. & Balladon, P., 2004. 10 p.

Research output: Contribution to conferenceConference articleScientific

Kokemuksia kattilalaitosten elinikätarkasteluista

Auerkari, P. & Lehtinen, O., 2004. 11 p.

Research output: Contribution to conferenceConference articleProfessional

Models and methods for predicting creep life and creep strength of ferritic steels

Auerkari, P. & Holmström, S., 2004.

Research output: Contribution to conferenceConference articleScientificpeer-review

Survey of RIMAP project: practical application of the concept and methodology to components in power plants

Jovanovic, A. S. & Auerkari, P., 2004.

Research output: Contribution to conferenceConference articleScientificpeer-review

2003

Risk of failure incidents in plant - experience and examples

Auerkari, P., 2003. 9 p.

Research output: Contribution to conferenceConference articleScientific

Uncertainties in long-term life prediction: example of nuclear fuel repository canisters

Auerkari, P. & Holmström, S., 2003. 6 p.

Research output: Contribution to conferenceConference articleScientific

1999

Kannettavien kovuusmittarien vertailu

Translated title of the contribution: Comparison of portable hardness testersAuerkari, P., Kallio, H., Kaskinen, P., Sirviö, R. & Laukkanen, A., 1999. 11 p.

Research output: Contribution to conferenceConference articleProfessional

1995

Intelligent software systems for inspection planning - the BE5935 project

Jovanovic, A., Auerkari, P., Kautz, H., Ellingsen, H. & Psomas, S., 1995. 19 p.

Research output: Contribution to conferenceConference articleScientific

Theoretical and practical basis of advanced inspection planning

Auerkari, P., 1995. 10 p.

Research output: Contribution to conferenceConference articleScientific

1989

Recent experiences on the non-destructive inspections of high temperature equipment

Auerkari, P., Sillanpää, J., Kauppinen, P. & Salonen, J., 1989. 10 p.

Research output: Contribution to conferenceConference articleScientific

1988

Accuracy requirements for life assessment

Auerkari, P. & Salonen, J., 1988. 13 p.

Research output: Contribution to conferenceConference articleScientific

Kattilalaitoksen elinikätutkimukset

Auerkari, P., 1988. 9 p.

Research output: Contribution to conferenceConference articleProfessional

Voimalaitoksen käyttökunnon ja eliniän arviointi

Auerkari, P., 1988. 15 p.

Research output: Contribution to conferenceConference articleProfessional

Werkstofftechnische Möglichkeiten fur die mittel- und langfristige Restlegensdauervorhersage von kriechbeanspruchten Kraftswerkskomponenten

Auerkari, P., Blum, R., Borggreen, K., Etienne, C., Ilschner, B., Neubauer, B., Riedel, H., Sauthoff, G. & Solenthaler, C., 1988, p. 1-11.

Research output: Contribution to conferenceConference articleScientific

1987

Application of the replica technique in assessing the creep damage of high temperature components in Finnish power plants

Rintamaa, R., Auerkari, P. & Salonen, J., 1987. 15 p.

Research output: Contribution to conferenceConference articleScientific

Fracture testing of silicate composites

Auerkari, P., Kumpulainen, J. & Wallin, K., 1987. 15 p.

Research output: Contribution to conferenceConference articleScientific

Keraamien testaus

Auerkari, P. & Kauppinen, P., 1987. 4 p.

Research output: Contribution to conferenceConference articleProfessional

Relation between creep damage, strain and residual life in power plant steam pipes

Auerkari, P. & Vierros, P., 1987. 9 p.

Research output: Contribution to conferenceConference articleScientific

1986

Jäännöseliniän määrittämisen perusteet

Auerkari, P., 1986. 15 p.

Research output: Contribution to conferenceConference articleProfessional

Kuumien putkistojen kunnon määrittäminen

Auerkari, P., 1986. 14 p.

Research output: Contribution to conferenceConference articleProfessional

Suunnittelu ja todellinen elinikä

Auerkari, P., 1986. 13 p.

Research output: Contribution to conferenceConference articleProfessional

1985

The replica technique in the determination of creep damage

Vierros, P., Auerkari, P. & Salonen, J., 1985. 6 p.

Research output: Contribution to conferenceConference articleScientificpeer-review

1984

The effect of welding on the mechanical properties of cold worked structural steels

Vierros, P., Rantanen, M. & Auerkari, P., 1984. 12 p.

Research output: Contribution to conferenceConference articleScientific

1982

Energialaitosten suorituskyvyn parantamiseen tähtäävät materiaalitekniset tutkimukset VTT:ssa

Auerkari, P., Törrönen, K. & Forsten, J., 1982. 11 p.

Research output: Contribution to conferenceConference articleProfessional