No photo of Pertti Lintunen

Pertti Lintunen

  • Phone+358405370124
20032020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020

Ferrochrome Slag Feasibility as a Raw Material in Refractories: Evaluation of Thermo-physical and High Temperature Mechanical Properties

Karhu, M., Talling, B., Piotrowska, P., Matas Adams, A., Sengottuvelan, A., Huttunen-saarivirta, E., Boccaccini, A. R. & Lintunen, P., 2020, In : Waste and Biomass Valorization.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2018

Valorization of the steel industry slag and by-products as raw material asset for innovative refractories

Karhu, M., Piotrowska, P., Talling, B., Hum, J., Boccaccini, A. R. & Lintunen, P., 2018.

Research output: Contribution to conferenceConference AbstractScientific

2017

Characterisation of steel industry slag suitability as raw material for refractory castables

Karhu, M., Lintunen, P., Lagerbom, J. & Lindroos, T., 2017, 5th International Slag Valorisation Symposium . KU Leuven, p. 71-74

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

High wear resistance TiC metal matrix composites based on reactive hot pressing

Lindroos, T., Lintunen, P. & Lagerbom, J., 2017, Euro PM2017 Proceedings USB. European Power Metallurgy Association EPMA

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2016

Economical Processing Route of ODS Material by Controlled Surface Oxidation of FE 9Cr Powder

Lagerbom, J., Lintunen, P., Ivanchenko, M., Metsäjoki, J., Oksa, M. & Virta, J., 2016, Proceedings of World PM2016. European Power Metallurgy Association EPMA

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2015

Novel titanium carbide based hard metal alternative for traditional WC-Co

Lindroos, T., Lintunen, P., Karhu, M. & Kemppainen, J., 2015, Proceedings of International Power Metallurgy Congress and Exhibition, Euro PM2015. European Power Metallurgy Association EPMA

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

2013

Materiaalien sähköisten ja magneettisten parametrien räätälöinti RF-taajuusalueella

Lintunen, P., Lindroos, T. & Hujanen, A., 2013, Puolustusministeriö. 8 p. (Maanpuolustuksen tieteellinen neuvottelukunta. Raporttisarja B; No. MAT 842).

Research output: Book/ReportReport

Open Access

RMC on substitution under extreme conditions using powder technological concepts

Kivikytö-Reponen, P., Lindroos, T., Lintunen, P. & Laitinen, T., 2013.

Research output: Contribution to conferenceConference PosterScientific

Open Access
2011

Characterisation of plasma-sprayed SrFe12O19 coatings for electromagnetic wave absorption

Bobzin, K., Bolelli, G., Bruehl, M., Hujanen, A., Lintunen, P., Lisjak, D., Gyergyek, S. & Lusvarghi, L., 2011, In : Journal of the European Ceramic Society. 31, 8, p. 1439-1449 11 p.

Research output: Contribution to journalArticleScientificpeer-review

22 Citations (Scopus)

Hexaferrite/polyester composite coatings for electromagnetic-wave absorbers

Lisjak, D., Bégard, M., Bruehl, M., Bobzin, K. B., Hujanen, A., Lintunen, P., Bolelli, G., Lusvarghi, L., Ovtar, S. & Drofenik, M., 2011, In : Journal of Thermal Spray Technology. 20, 3, p. 638-644 7 p.

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

Hexaferrite/polyethylene Composite coatings prepared with flame spraying

Lisjak, D., Lintunen, P., Hujanen, A., Varis, T., Bolelli, G., Lusvarghi, L., Jagodic, M. & Drofenik, M., 2011, In : Materials Letters. 65, 3, p. 534-536 3 p.

Research output: Contribution to journalArticleScientificpeer-review

9 Citations (Scopus)

Matalaemissiivinen ja tutkasäteitä absorboiva hybridimaali

Lintunen, P. & Hujanen, A., 2011, Helsinki: Puolustusministeriö. (Maanpuolustuksen tieteellinen neuvottelukunta. Raporttisarja B; No. 803, Vol. 2011).

Research output: Book/ReportReport

Open Access
2010

Development of Ba-hexaferrite coatings for electromagnetic wave absorption applications

Bobzin, K., Schlaefer, T., Bégard, M., Bruehl, M., Bolelli, G., Lusvarghi, L., Lisjak, D., Hujanen, A., Lintunen, P., Kanerva, U., Varis, T. & Pasquale, M., 2010, In : Surface and Coatings Technology. 205, 4, p. 1015-1020 6 p.

Research output: Contribution to journalArticleScientificpeer-review

16 Citations (Scopus)

Magnetic phase formation in CoTi-substituted Ba hexaferrite coatings prepared with atmospheric plasma spraying

Lisjak, D., Bolelli, G., Lusvarghi, L., Bégard, M., Bruehl, M., Bobzin, K., Lintunen, P., Kanerva, U., Pasquale, M. & Drofenik, M., 2010, In : Journal of the American Ceramic Society. 93, 9, p. 2579-2584 6 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Microstructure and properties of TiC metal matrix composite

Lagerbom, J., Ritvonen, T., Lintunen, P., Keskiaho, K., Tiusanen, J., Rauta, V. & Cingi, C., 2010, Proceedings: World PM2010. European Power Metallurgy Association EPMA, Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Termisellä ruiskutuksella tutkasäteilyä vaimentava pinta

Lintunen, P., Hujanen, A., Varis, T. & Ritvonen, T., 2010, 9 p. (MATINEn raporttisarja B; No. 2010/782).

Research output: Book/ReportReport

Valujen sula-lujiterajapintojen ymmärtäminen ja hallittujen FG-rakenteiden kehittäminen (Sulataju): Loppuraportti

Lagerbom, J., Lintunen, P., Ritvonen, T., Turunen, E., Kiviö, M., Väyrynen, P., Niittynen, L., Heikkinen, H., Rauta, V., Cingi, C., Niini, E., Holappa, L., Louhenkilpi, S., Orkas, J., Oksanen, V., Niemi, M., Tiusanen, J., Rissa, K., Keskiaho, K., Itävuori, E. & 2 others, Tiainen, T. & Lepistö, T., 2010, Tampere: VTT Technical Research Centre of Finland. 25 p. (VTT Tutkimusraportti; No. VTT-R-08817-10).

Research output: Book/ReportReport

Open Access
2009

Preparation of barium hexaferrite coatings using atmospheric plasma spraying

Lisjak, D., Bobzin, K., Richardt, K., Bégard, M., Bolelli, G., Lusvarghi, L., Hujanen, A., Lintunen, P., Pasquale, M., Olivetti, E., Drofenik, M. & Schläfer, T., 2009, In : Journal of the European Ceramic Society. 29, 11, p. 2333-2341 9 p.

Research output: Contribution to journalArticleScientificpeer-review

30 Citations (Scopus)

The preparation of barium hexaferrite coatings using HVOF

Lisjak, D., Makovec, D., Gyrgyek, S., Hujanen, A., Lintunen, P., Varis, T., Bolelli, G., Lusvarghi, L. & Drofenik, M., 2009, In : Journal of the American Ceramic Society. 92, 4, p. 818-824 7 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Thermally-sprayed BaCoTiFe10O19 layers as microwave absorbers

Bolelli, G., Lusvarghi, L., Lisjak, D., Hujanen, A., Lintunen, P., Kanerva, U., Varis, T., Bégard, M., Richardt, K., Schläfer, T., Bobzin, K. & Pasquale, M., 2009, Expanding Thermal Spray Performance to New Markets and Applications : Proceedings of the 2009 International Thermal Spray Conference, ITSC 2009. p. 628-633

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Thermal spraying of Co,Ti-substituted Ba-hexaferrite coatings for electromagnetic wave absorption applications

Bégard, M., Bobzin, K., Bolelli, G., Hujanen, A., Lintunen, P., Lisjak, D., Gyergyek, S., Lusvarghi, L., Pasquale, M., Richardt, K., Schläfer, T. & Varis, T., 2009, In : Surface and Coatings Technology. 203, 20-21, p. 3312-3319 8 p.

Research output: Contribution to journalArticleScientificpeer-review

32 Citations (Scopus)
2008

The Effect of Annealing on the Formation of Jexaferrite Absorber Coatings Produced by Thermal Spraying Technologies

Lisjak, D., Lintunen, P., Varis, T., Hujanen, A., Bobzin, K., Richarde, K., Begard, M., Bolelli, G., Lusvarghi, L., Pasquale, M., Olivetti, E. S., Drofenik, M. & Schläfer, T., 2008.

Research output: Contribution to conferenceConference articleScientific

2006

Development of nano-reinforced HVOF sprayed ceramic coatings

Turunen, E., Keskinen, J., Heczko, O., Lintunen, P., Gustafsson, T., Ge, Y., Arponen, M. & Hannula, S-P., 2006, In : Advanced Engineering Materials. 8, 7, p. 669-673

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Improved mechanical properties by nanoreinforced HVOF-sprayed ceramic composite coatings

Turunen, E., Varis, T., Gustafsson, T. E., Keskinen, J., Lintunen, P., Lintula, P. & Hannula, S-P., 2006, Applied Material Research at VTT: Symposium on Applied Materials. Espoo: VTT Technical Research Centre of Finland, p. 188-199 (VTT Symposium; No. 244).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access

Process optimization for nanostructured HVOF -sprayed Al2O3-based ceramic coatings

Turunen, E., Varis, T., Gustafsson, T. E., Keskinen, J., Lintunen, P., Fält, T., Nowak, R. & Hannula, S-P., 2006, In : Key Engineering Materials. 317-318, p. 545-548

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)
2005

Nanoreinforced HVOF - sprayed ceramic coatings

Turunen, E., Varis, T., Hannula, S-P., Keskinen, J., Lintunen, P. & Fält, T., 2005, Proceedings of the International Thermal Spray Conference and Exposition, ITSC 2005: Thermal Spray Connects: Explore its Surfacing Potential. Dusseldorf: DVS Verlag

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Process optimization and performance of nanoreinforced HVOF-sprayed ceramic coatings

Turunen, E., Varis, T., Gustafsson, T. E., Hannula, S-P., Keskinen, J., Lintunen, P. & Fält, T., 2005, Proceedings of 16th International Plansee Seminar: Powder metallurgical high performance materials . Reutte, Vol. 1. p. 422 - 433

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2004

Industrial application of nanomaterials - changes and risks: Technology analysis

Luther, W., Nass, R., Schuster, F., Kallio, M., Lintunen, P. & et al., 2004, 119 p. (Future Technologies; No. 54).

Research output: Book/ReportReport

Open Access
2003

Processing and properties of metal matrix composites synthesized by SHS

Hannula, S-P., Lintula, P., Lintunen, P. & Lindroos, T., 2003, In : Materials Science Forum. 426-432, 7, p. 1971-1978 8 p.

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)

SHS- materials and claddings

Lintunen, P., Lintula, P., Jansson, A. & Turunen, E., 2003, Proceedings of Joint Nordic Conference in Powder Technology.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific