Peter Andersson

  • Phone+358407532310
1987 …2017

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference article in proceedings
2009

Experimental wear evaluation of starved oil-lubricated heavily loaded, oscillating journal bearings

Strand, H., Johansson, S., Andersson, P. & Pettersson, A., 2009, Proceedings of World Tribology Congress 2009. Japanese Society of Tribologists, p. 104 F-135

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2005

The low-friction engines project

Andersson, P., Murtonen, T., Valkonen, A., Tamminen, J. & Sandström, C-E., 2005, COST 532 Conference - Triboscience and Tribotechnology - Superior Friction and Wear Control in Engines and Transmissions. et al. (eds). Andrade Ferreira, L. (ed.). p. 215-222

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2004

Low-friction engines

Andersson, P., Kytö, M., Murtonen, T., Valkonen, A., Tamminen, J. & Sandström, C-E., 2004, COST 532 Conference, Triboscience and Tribotechnology : Superior Friction and Wear Control in Engines and Transmissions. Holmberg, K., De Baets, P. & Celis, J. P. (eds.). Ghent University, p. 113-120

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2003

A new tribometer for piston ring friction measurements

Andersson, P., 2003, Tribological Research and Design for Engineering Systems: Proceedings of the 29th Leeds-Lyon Symposium on Tribology. Dowson, D., Priest, M., Dalmaz, G. & Lubrecht, A. A. (eds.). Elsevier, p. 501-510 (Tribology Series, Vol. 41).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

3 Citations (Scopus)
2002

Measurement of sedimentation stability of magnetorheological fluids

Tervo, J., Andersson, P. & Varjus, S., 2002, 8th International Conference on New Actuators, ACTUATOR 2002: Bremen, Germany, 10-12 June 2002. Messe Bremen GmbH, 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Measurements on piston ring friction using a newly developed tribometer

Andersson, P., 2002, 10th Nordic Symposium on Tribology - Nordtrib 2002. KTH Royal Institute of Technology, 10 p. (Trita-MKK; No. 2002/03).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

1998

Methods to monitor the running situation of grease lubricated rolling bearings

Miettinen, J. & Andersson, P., 1998, COST 516 Tribology Symposium. Espoo: VTT Technical Research Centre of Finland, p. 92-101 (VTT Symposium; No. 180).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Procedure for ferrographic analysis of grease samples from bearing tests

Andersson, P., Sainio, H. & Miettinen, J., 1998, COST 516 Tribology Symposium. Espoo: VTT Technical Research Centre of Finland, p. 82-91 (VTT Symposium; No. 180).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1997

Comprehensive failure analysis (kokonaisvaltainen vaurioanalyysi)

Säynätjoki, M. & Andersson, P., 1997, Käyttövarmuus kilpailutekijänä. Espoo: VTT Technical Research Centre of Finland, p. 93-106 (VTT Symposium; No. 175).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1995

Influence of water and oil lubrication in sliding contacts with diamond-like coatings

Holmberg, K., Ronkainen, H., Varjus, S. & Andersson, P., 1995, Meeting of the International Research Group on Wear of Materials, IRG OECD . 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

1994

Keraamilaakereiden käyttövarmuus

Translated title of the contribution: Operation reliability of ceramic bearingsAndersson, P., 1994, Koneiden käyttövarmuustekniikan seminaari. Holmberg, K. & Andersson, P. (eds.). Espoo: VTT Technical Research Centre of Finland, p. 93-99 (VTT Valmistustekniikka. Tutkimusraportti; No. VALB20).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Tribology in the Nordic countries

Holmberg, K. & Andersson, P., 1994, Proceedings of the 6th Nordic Symposium on Tribology, Nordtrib '94: Monday. Hedenqvist, P., Hogmark, S. & Jacboson, S. (eds.). Uppsala, Vol. 1. p. 3-8

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Wear characteristics of water-lubricated SiC journal bearings in intermittent motion

Andersson, P., Nikkilä, A-P. & Lintula, P., 1994, Proceedings of the 6th Nordic Symposium on Tribology Nordtrib '94: Tuesday. Hedenqvist, P., Hogmark, S. & Jacobson, S. (eds.). Uppsala, Vol. 2. p. 325-332

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1993

Elastic and dry sliding characteristics of HVOF-sprayed Al2O3 and Al2O3-TiO2 coatings

Hirvonen, J-P., Kauppinen, P., Andersson, P., Lappalainen, R. & Johansson, L-S., 1993, Thermal Spray Coatings: Research, Design and Applications. Berndt, C. C. & Bernecki, T. F. (eds.). Materials Park: ASM International, p. 179-184

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

On specifying a coated surface for tribological use

Holmberg, K. & Andersson, P., 1993, Proceedings of the 18th Meeting of the International Research Group on Wear of Engineering Materials IRG-OECD. Schipper, D. J. (ed.). Enschede, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1992

Pin-on-disc tests with ceramics in air and aqueous media

Andersson, P., 1992, Proceedings of the 4th International Symposium on Ceramic Materials and Components for Engines. Carlsson, R., Johansson, T. & Kahlman, L. (eds.). London: Elsevier, p. 1240-1247

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Tribological tests with filled plastics

Säynätjoki, M. & Andersson, P., 1992, Composite materials. DiBendetto, A. T., Nicolais, L. & Watanabe, R. (eds.). Amsterdam: Elsevier, p. 95-100

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1990

Tribological properties of PM aluminium alloy matrix composites

Jokinen, A. & Andersson, P., 1990, Advances in powder metallurgy: Proceedings of the 1990 Powder Metallurgy Conference & Exhibition. Andreotti, E. R. & McGeehan, P. J. (eds.). Princeton, p. 517-530

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

9 Citations (Scopus)
1989

Engineering ceramics under low stress abrasion

Andersson, P., 1989, Proceedings of the 5th International Congress on Tribology. Holmberg, K. & Nieminen, I. (eds.). Helsinki, Vol. 4. p. 60-65

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Tribological aspects in design with ceramics

Andersson, P., 1989, New materials and processes: 5th Scandinavian Symposium on Materials Science. Hansson, I. L. H. (ed.). Copenhagen, p. 109-115

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review