Sanna Aikio

20002019
If you made any changes in Pure these will be visible here soon.

Research Output 2000 2019

Filter
Article
2018
6 Citations (Scopus)

Roll-to-roll fabrication of integrated PDMS–paper microfluidics for nucleic acid amplification

Hiltunen, J., Liedert, C., Hiltunen, M., Huttunen, O-H., Hiitola-Keinänen, J., Aikio, S., Harjanne, M., Kurkinen, M., Hakalahti, L. & Lee, L. P., 2018, In : Lab on a Chip. 18, 11, p. 1552-1559 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
Microfluidics
Molecular Pathology
Nucleic acids
Lab-On-A-Chip Devices
Nucleic Acids
2017
1 Citation (Scopus)

Influence of an Al2O3 surface coating on the response of polymeric waveguide sensors

Ahmadi, L., Hiltunen, M., Hiltunen, J., Aikio, S., Saarinen, J., Honkanen, S. & Roussey, M., 16 Oct 2017, In : Optics Express. 25, 21, p. 25102-25112 11 p.

Research output: Contribution to journalArticleScientificpeer-review

waveguides
coatings
sensors
linearity
ethyl alcohol
2016
10 Citations (Scopus)

Disposable (bio)chemical integrated optical waveguide sensors implemented on roll-to-roll produced platforms

Aikio, S., Zeilinger, M., Hiltunen, J., Hakalahti, L., Hiitola-Keinänen, J., Hiltunen, M., Kontturi, V., Siitonen, S., Puustinen, J., Lieberzeit, P. & Karioja, P., 2016, In : RSC Advances. 6, 56, p. 50414-50422

Research output: Contribution to journalArticleScientificpeer-review

Optical waveguides
Sensors
Interferometers
Polymers
Biomolecules
18 Citations (Scopus)

Disposable photonic integrated circuits for evanescent wave sensors by ultra-high volume roll-to-roll method

Aikio, S., Hiltunen, J., Hiitola-Keinänen, J., Hiltunen, M., Kontturi, V., Siitonen, S., Puustinen, J. & Karioja, P., 2016, In : Optics Express. 24, 3, p. 2527-2541

Research output: Contribution to journalArticleScientificpeer-review

Open Access
evanescent waves
integrated circuits
photonics
sensors
production engineering
7 Citations (Scopus)

Hybrid layered polymer slot waveguide Young interferometer

Ahmadi, L., Hiltunen, M., Stenberg, P., Hiltunen, J., Aikio, S., Roussey, M., Saarinen, J. & Honkanen, S., 2016, In : Optics Express. 24, 10, p. 10275-10285

Research output: Contribution to journalArticleScientificpeer-review

Open Access
slots
interferometers
waveguides
polymers
refractivity
2015
2 Citations (Scopus)

Compensation of drift by using a multichannel integrated Young interferometer

Aikio, S., Hiltunen, M. & Hiltunen, J., 2015, In : Applied Optics. 54, 15, p. 4771-4780

Research output: Contribution to journalArticleScientificpeer-review

Interferometers
interferometers
chips
Sensors
sensors

Drift compensation using a multichannel slot waveguide young interferometer

Aikio, S., Hiltunen, M., Stenberg, P. & Hiltunen, J., 2015, In : Journal of the European Optical Society: Rapid Publications. 10, 7 p., 15053.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
slots
interferometers
waveguides
readout
sensors
2014
22 Citations (Scopus)

Polymeric slot waveguide interferometer for sensor applications

Hiltunen, M., Hiltunen, J., Stenberg, P., Aikio, S., Kurki, L., Vahimaa, P. & Karioja, P., 2014, In : Optics Express. 22, 6, p. 7229-7237 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
slots
interferometers
waveguides
sensors
refractivity
2011

Kertakäyttöisiä antureita R2R-menetelmin: Nanofotonisia anturisiruja

Karioja, P., Tuominen, J., Hiltunen, J., Aikio, S. & Siitonen, S., 2011, In : Prosessori. 11-12, p. 54-56

Research output: Contribution to journalArticleProfessional

2010

Biosensing with low-index waveguides: An experimental study of a polymer-based young interferometer sensor

Uusitalo, S., Känsäkoski, M., Kärkkäinen, A., Hannu-Kuure, M., Aikio, S. & Kopola, H., 2010, In : Micro and Nanosystems. 2, 2, p. 65-69 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Interferometers
Refractive index
Waveguides
Sensors
Polymers
2006

Biomolekyyleillä lisäarvoa kuitutuotteille

Smolander, M. & Aikio, S., 2006, In : Kehittyvä elintarvike. 17, 5, p. 44-45

Research output: Contribution to journalArticleProfessional