Simo-Pekka Leino

  • Phone+358407377184
19982019

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference article in proceedings
2019

Beyond the Obvious - The Industry 5.0 by Hybrid Modelling

Lämsä, V. S., Leino, S-P., Kortelainen, J., Hemming, B., Nieminen, V., Saarela, O., Kivikytö-Reponen, P. & Kotovirta, V., 2019, Proceedings of the NAFEMS World Congress 2019. NAFEMS, 17 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2018

Digital tools to support knowledge sharing and cooperation in high-investment product-services

Aromaa, S., Leino, S. P., Reyes-Lecuona, A., Frangakis, N., Berglund, J., Bosch, T., van Rhijn, G. & Granholm, G., 1 Jan 2018, Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future - Proceedings of the AHFE 2017 International Conference on Human Aspects of Advanced Manufacturing. Springer, p. 235-246 12 p. (Advances in Intelligent Systems and Computing, Vol. 606).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2 Citations (Scopus)

Modelling of Digital Extended Enterprise

Pulkkinen, A., Vainio, V., Leino, S-P. & Anttila, J-P., 2018, Proceedings of the 20th International Dependency and Structure Modeling Conference, DSM 2018. Becerril, L., Leardi, C., Browning, T. R. & Eppinger, S. D. (eds.). Design Society, p. 139-148

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
1 Citation (Scopus)
2017

Digimaturity in Manufacturing Industry

Leino, S-P. & Anttila, J-P., 2017, Proceedings of the 2nd Annual SMACC Research Seminar. p. 25-28

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access

Role of VR throughout the life of low volume products towards digital extended enterprises

Leino, S-P., Pulkkinen, A. & Anttila, J-P., 1 Jan 2017, Product Lifecycle Management and the Industry of the Future: 14th IFIP WG 5.1 International Conference, PLM 2017, Revised Selected Papers. Rios, J., Bernard, A., Foufou, S. & Bouras, A. (eds.). Springer, p. 404-415 12 p. (IFIP Advances in Information and Communication Technology, Vol. 517).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

2016

Case study on engineering change management and digital manufacturing

Leino, S-P., Jokinen, L., Anttila, J-P. & Pulkkinen, A., 21 Apr 2016, Product Lifecycle Management in the Era of Internet of Things, PLM 2015. Springer, p. 591-600 (IFIP Advances in Information and Communication Technology, Vol. 467).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1 Citation (Scopus)

Characterising the industrial context of engineering change management

Pulkkinen, A., Huhtala, P., Leino, S. P., Anttila, J. P. & Vainio, V. V., 1 Jan 2016, Product Lifecycle Management in the Era of Internet of Things - 12th IFIP WG 5.1 International Conference, PLM 2015, Revised Selected Papers. Springer, p. 618-627 10 p. (IFIP Advances in Information and Communication Technology, Vol. 467).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1 Citation (Scopus)
2014

Reality: Virtuality phenomena model in virtual prototyping

Leino, S-P. & Riihihuhta, A., 2014, Proceedings of TMCE 2014. Delft University of Technology, p. 969-980

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2013

Are companies ready for the revolution in design: Modelling maturity for virtual prototyping

Aromaa, S., Leino, S-P. & Viitaniemi, J., 2013, Proceeding of the 19th International Conference on Engineering Design, ICED 2013: DS 75-9. Design for Harmonies, Vol.9: Design Methods and Tools. Lindemann, U., V, S., Kim, Y. S., Clarkson, J. & Cascini, G. (eds.). Design Society, Vol. 9. p. 297-304

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
2 Citations (Scopus)

Value of Virtual Prototyping: A Strategic Resource Based View

Leino, S-P., Koivisto, T. & Riitahuhta, A., 2013, Proceedings of the 19th International Conference on Engineering Design, ICED 13. Copenhagen: Danmarks Tekniske Universitet, p. 249-258

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1 Citation (Scopus)
2012

Benefits of the use of virtual environments in product design review meeting

Aromaa, S., Leino, S-P., Viitaniemi, J., Jokinen, L. & Kiviranta, S., 2012, DS 70: Proceedings of DESIGN 2012, the 12th International Design Conference, Dubrovnik, Croatia. Zagreb, Croatia: Design Society, p. 355-364

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
5 Citations (Scopus)

Design for human: Virtual engineering is a media for knowledge transfer

Leino, S-P. & Pulkkinen, A., 2012, Proceedings of DESIGN 2012. Zagreb, Croatia, p. 1507-1514

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2 Citations (Scopus)

PLM Impact Analysis Model: PIA

Leino, S-P., Anttila, J-P., Heikkilä, J., Aaltonen, J. & Helin, K., 2012, Product Lifecycle Management: Towards Knowledge-Rich Enterprises. Springer, p. 501-511 (IFIP Advances in Information and Communication Technology, Vol. 388).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1 Citation (Scopus)

State of the Art of Virtual Engineering Based Human-Machine System Lifecycle Knowledge Transfer and Management

Leino, S-P. & Riitahuhta, A., 2012, Proceedings of the Ninth International Symposium on Tools and Methods of Competitive Engineering: TMCE 2012. Delft: Delft University of Technology, p. 573-586

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2011

Customer requirements validation with VR technologie: Case Metso Minerals

Heikkilä, J., Helin, K. & Leino, S-P., 1 Dec 2011, Joint VR Conference of euroVR and EGVE, 2011 : Current and Future Perspectives of Virtual Reality, Augmented Reality and Mixed Reality: Industrial and Poster Track. 269 ed. Espoo, p. 9-15 7 p. (VTT Symposium; No. 269).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access

Product development support for complex mechatronic system engineering - case fusion reactor maintenance

Leino, S. P., Mäkinen, H., Uuttu, O. & Järvenpää, J., 1 Dec 2011, ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design. Design Society, Vol. DS68-4. p. 319-328 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access

Using virtual reality in designing the assembly process of a car

Becker, I., Toivonen, V. & Leino, S. P., 1 Dec 2011, ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design. Vol. DS 68-9. p. 91-100 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
2010

Collaboration between Design and Production by exploiting VR/AR and PLM: Case Metso Minerals

Leino, S-P., Kiviranta, S., Rantanen, P., Heikkilä, J., Martikainen, T., Vehviläinen, M., Mäkiranta, A., Nuutinen, P., Hokkanen, I. & Multanen, P., 2010, Advances in Occupational, Social, and Organizational Ergonomics. Vink, P. & Kantola, J. (eds.). Boca Raton: CRC Press, 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Integration of manual work related information to PLM

Leino, S. P., Lind, S., Heikkilä, J. & Uuttu, O., 1 Dec 2010, Proceedings of DESIGN 2010, the 11th International Design Conference, Dubrovnik, Croatia. Design Society, Vol. DS 60. p. 1353-1360 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
2 Citations (Scopus)

Managing high variety products in global value systems

Pulkkinen, A., Riitahuhta, A., Leino, S-P., Lappeteläinen, I., Heikkilä, M. & Kohtamäki, M., 2010, 7th International Conference on Product Lifecycle Management, PLM 10, 12-14 July, 2010, BIBA University of Bremen, Germany. Inderscience Publishers

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

ManuVAR PLM model, methodology, architecture, and tools for manual work support throughout system lifecycle

Krassi, B., Kiviranta, S., Liston, P., Leino, S-P., Strauchmann, M., Reyes-Lecuona, A., Viitaniemi, J., Sääski, J., Aromaa, S. & Helin, K., 2010, Advances in Occupational, Social, and Organizational Ergonomics. Vink, P. & Kantola, J. (eds.). Boca Raton: CRC Press, 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1 Citation (Scopus)

Virtual Model for Supporting Communication of Manual Work Information Throughout System Lifecycle

Krassi, B., Strauchmann, M., Kiviranta, S., Leino, S-P., Viitaniemi, J., Reyes-Lecuona, A. & Sääski, J., 2010, Peroceedings: Fraunhofer Institute for Factory Operation and Automation (IFF) days 2010 . 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
2009

Adaption of virtual tools to support cost-effective maintenance of machines

Multanen, P., Mäkiranta, A., Nuutinen, P., Leino, S-P., Helin, K. & Lind, S., 2009, Proceedings of 22nd International Congress Condition Monitoring and Diagnostic Management, COMADEM 2009. p. 673-680

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A high-level haptic interface for enhanced interaction within virtools™

Poyade, M., Reyes-Lecuona, A., Leino, S. P., Kiviranta, S., Viciana-Abad, R. & Lind, S., 1 Dec 2009, Virtual and Mixed Reality - Third International Conference, VMR 2009, Held as Part of HCI International 2009, Proceedings. Berlin, Germany: Springer, p. 365-374 10 p. (Lecture Notes in Computer Science, Vol. 5622 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

5 Citations (Scopus)

A Virtual Engineering Based Method for Maintainability Design

Lind, S., Leino, S-P., Multanen, P., Mäkiranta, A. & Heikkilä, J., 2009, Proceedings of 4th International Conference in Maintenance and Facility Management. Rome, p. 117-122

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Enhanced industrial maintenance work task planning by using virtual engineering tools and haptic user interfaces

Leino, S. P., Lind, S., Poyade, M., Kiviranta, S., Multanen, P., Reyes-Lecuona, A., Mäkiranta, A. & Muhammad, A., 1 Dec 2009, Virtual and Mixed Reality - Third International Conference, VMR 2009, Held as Part of HCI International 2009, Proceedings. Berlin, Germany: Springer, p. 346-354 9 p. (Lecture Notes in Computer Science, Vol. 5622 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

15 Citations (Scopus)

Method and tools for machine maintainability design in VE

Mäkiranta, A. V., Multanen, P. P., Leino, S. P. S. & Lind, S. M., 1 Jan 2009, 6th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2009. British Institute of Non-Destructive Testing, Vol. 2. p. 876-887 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2 Citations (Scopus)
2008

Development of a virtual environment for promoting safety in machine maintenance

Lind, S., Leino, S-P., Viitaniemi, J., Helin, K., Multanen, P., Mäkiranta, A., Heikkilä, J. & Kiviranta, S., 2008, Proceedings of the 6th International Conference on Occupational Risk Prevention, ORP 2008. Coruna, ES, 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

The Virtual Environments and New Human-Centred Design Method in the Desing of Vehicular Working Machine Interfaces

Helin, K., Viitaniemi, J., Leino, S-P., Krassi, B. & Poyade, M., 2008, Proceedings of the 2nd International Conference on Applied Human Factors and Ergonomics, AHFE 2008. Las Vegas, 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2006

Dynamic behaviour of human body during operation of mobile machines

Launis, S., Leino, S. P. & Kortelainen, J. M., 1 Dec 2006, ASME 8th Biennial Conference on Engineering Systems Design and Analysis: Volume 3: Dynamic Systems and Controls, Symposium on Design and Analysis of Advanced Structures, and Tribology. American Society of Mechanical Engineers ASME, Vol. 3. p. 213-220 ESDA2006-95294

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Human comfort and motion under simulated vibration exposure of mobile machinery

Leino, S. P., Marjanen, Y., Launis, S., Kortelainen, J. & Liusvaara, M., 1 Dec 2006, 13th International Congress on Sound and Vibration 2006, ICSV 2006. Vol. 6. p. 4361-4368 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

3 Citations (Scopus)
2005

Participatory innovative design technology tools for enhancing production systems and environment

Määttä, T., Viitaniemi, J., Säämänen, A., Helin, K., Leino, S-P. & Heinonen, K., 2005, Intelligent Production Machines and Systems: First I*PROMS Virtual Conference, 4-15 July 2005. Elsevier, p. 333-338

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2003

Virtual environment based procedure for production task evaluation and design

Määttä, T., Viitaniemi, J., Leino, S-P., Helin, K. & Aromaa, S., 2003, 8th IFAC Symposium on Automated Systems Based on Human Skill and Knowledge 2003. Elsevier, p. 181-186 (IFAC Proceedings Volumes; No. 22, Vol. 36).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2002

Human comfort and safety analysis in virtual case prototyping: Off-road vehicle

Leino, S. P., Viitaniemi, J. & Keula, S., 1 Dec 2002, Proceedings of Digital Human Modeling Conference. VDI Verlag GmbH, p. 457-466 (VDI-Berichte; No. 1675).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2 Citations (Scopus)

Human motions measurement for applying digital human model in virtual prototyping

Viitaniemi, J., Leino, S-P., Helin, K., Aromaa, S., Kopperoinen, A. & Lehtelä, J., 2002, Humans in a Complex Environment. 34th Annual Congress of the Nordic Ergonomics Society: Kolmården, Sweden, 1-3 October 2002. Linköping: Linköpings universitet, p. 823-828

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2001

Participating approach to work task design applying virtual environment

Viitaniemi, J., Leino, S-P., Helin, K. & Määttä, T., 2001, Promotion of health through ergonomic working and living conditions: outcomes and methods of research and practice: Proceedings of NES 2001. Tampere: University of Tampere, p. 74-77 (University of Tampere: School of public health. Publications, Vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Simulation and analysis of human machine system

Leino, S. P., Viitaniemi, J., Helin, K. & Kopperoinen, A., 1 Jan 2001, Virtual prototyping: VTT Research Programme 1998–2000. Lehtonen, M. (ed.). VTT Technical Research Centre of Finland, p. 39-50 12 p. (VTT Symposium; No. 210).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
2 Citations (Scopus)