Photo of Sini Metsä-Kortelainen

Sini Metsä-Kortelainen

D.Sc. (Tech.)

20052019
If you made any changes in Pure these will be visible here soon.

Research Output 2005 2019

2019
1 Citation (Scopus)

Properties of soft magnetic Fe-Co-V alloy produced by laser powder bed fusion

Riipinen, T., Metsä-Kortelainen, S., Lindroos, T., Keränen, J., Manninen, A. & Pippuri-Mäkeläinen, J., 13 May 2019, In : Rapid Prototyping Journal. 25, 4, p. 699-707 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
Fusion reactions
Powders
Heat treatment
Lasers
Magnetic properties
2018
53 Citations (Scopus)

Applicability of protein and fiber-rich food materials in extrusion-based 3D printing

Lille, M., Nurmela, A., Nordlund, E., Metsä-Kortelainen, S. & Sözer, N., 2018, In : Journal of Food Engineering. 220, April, p. 20-27 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Ointments
extrusion
Printing
dietary fiber
dried milk

Digitaaliset varaosat

Salmi, M., Partanen, J., Tuomi, J., Chekurov, S., Björkstrand, R., Huotilainen, E., Kukko, K., Kretzschmar, N., Akmal, J., Jalava, K., Koivisto, S., Vartiainen, M., Metsä-Kortelainen, S., Puukko, P., Jussila, A., Riipinen, T., Reijonen, J., Tanner, H. & Mikkola, M., 2018, VTT Technical Research Centre of Finland. 62 p.

Research output: Book/ReportReport

Digital Spare Parts

Salmi, M., Partanen, J., Tuomi, J., Chekurov, S., Björkstrand, R., Huotilainen, E., Kukko, K., Kretzschmar, N., Akmal, J., Jalava, K., Koivisto, S., Vartiainen, M., Metsä-Kortelainen, S., Puukko, P., Jussila, A., Riipinen, T., Reijonen, J., Tanner, H. & Mikkola, M., 2018, VTT Technical Research Centre of Finland. 65 p.

Research output: Book/ReportReport

Magnetic properties
Melting
3D printers
Porosity
Powders

Novel processing technologies for cellulose-based electrical insulation components

Kangas, H., Metsä-Kortelainen, S., Matysiak, L., Rosing, N. & Kalpio, T., 23 Oct 2018, NWBC 2018: Proceedings of the 8th Nordic Wood Biorefinery Conference. Hytönen, E. & Vepsäläinen, J. (eds.). VTT Technical Research Centre of Finland, p. 261-264 (VTT Technology; No. 340).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access
Insulation
Cellulose
Processing
Printing
Raw materials
15 Citations (Scopus)

The perceived value of additively manufactured digital spare parts in industry: An empirical investigation

Chekurov, S., Metsä-Kortelainen, S., Salmi, M., Roda, I. & Jussila, A., 10 Sep 2018, In : International Journal of Production Economics. 205, p. 87-97 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
3D printers
Industry
Electric power distribution
Supply chains
Processing
2017
63 Citations (Scopus)

3D-printable bioactivated nanocellulose-alginate hydrogels

Leppiniemi, J., Lahtinen, P., Paajanen, A., Mahlberg, R., Metsä-Kortelainen, S., Pinomaa, T., Pajari, H., Vikholm-Lundin, I., Pursula, P. & Hytönen, V., 2017, In : ACS Applied Materials & Interfaces. 9, 26, p. 21959-21970 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Hydrogels
Hydrogel
Alginate
Printing
Avidin

Decay resistance of beams made from thermally modified Scots pine and Norway spruce after 6 years' exposure in ground contact

Metsä-Kortelainen, S. & Viitanen, H., 2017, Proceedings. IRG/WP 17-40806

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Glues
Hot Temperature
7 Citations (Scopus)

Durability of thermally modified sapwood and heartwood of Scots pine and Norway spruce in the modified double layer test

Metsä-Kortelainen, S. & Viitanen, H., 27 May 2017, In : Wood Material Science and Engineering. 12, 3, p. 129-139 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Durability
Wood
Moisture
Hot Temperature
Melting
Lasers
Machining
Tool steel
Design of experiments

Simulation, optimisation and design of a 3D printed sand mould for a cast metal component

Komi, E., Kokkonen, P., Virta, J., Puukko, P. & Metsä-Kortelainen, S., 2017, Towards a new era in manufacturing: Final report of VTT's For Industry spearhead programme. VTT Technical Research Centre of Finland, p. 72-80 (VTT Technology, Vol. 288).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access
1 Citation (Scopus)

Soft magnetic alloys for selective laser melting

Lindroos, T., Riipinen, T., Metsä-Kortelainen, S., Pippuri, J., Lagerbom, J., Revuelta, A. & Metsäjoki, J., 1 Jan 2017, Euro PM2017 Proceedings USB. European Power Metallurgy Association EPMA

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

magnetic circuits
Magnetic circuits
Melting
3D printers
manufacturing
2016

3D Printing of Soft Magnetic Cores For Electrical Machines

Pippuri, J., Metsä-Kortelainen, S., Lindroos, T., Savolainen, M., Jokinen, A., Revuelta, A., Pasanen, A. & Ruusuvuori, K., 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. Aaltonen, J., Virkkunen, R., Koskinen, K. T. & Kuivanen, R. (eds.). Tampere University of Technology, p. 48-51 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access
3D printers
Magnetic cores
Printing
Machine design
Steel sheet

3D-tulostus mullistaa elintarvikkeiden tuotannon

Metsä-Kortelainen, S., Lille, M., Sözer, N. & Kalpio, T., 2016, In : Promaint. 29, 5, p. 42-44

Research output: Contribution to journalArticleProfessional

AM-prosessin integrointi tuotantoon: metalliosien valmistuksen työvaiheet

Vaajoki, A. & Metsä-Kortelainen, S., 2016, VTT Technical Research Centre of Finland. 30 p. (VTT Tutkimusraportti; No. VTT-R-03327-16).

Research output: Book/ReportReport

Global survey on durability variation - on the effect of the reference species

Stirling, R., Alfredsen, G., Brischke, C., De Windt, I., Francis, L. P., Frühwald Hansson, E., Humar, M., Jermer, J., Klamer, M., Kutnik, M., Laks, P. E., Le, B. I., Metsä-Kortelainen, S., Meyer-Veltrup, L., Morris, P. I., Norton, J., Singh, T., Van Acker, J., Van den Bulcke, J., Venås, T. M. & 2 others, Viitanen, H. & Wong, A. H. H., 2016, 47th IRG Annual Meeting: Proceedings. 26 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

durability
climate
moisture
climate change
test
Open Access
Magnetic cores
Printing
Melting
Topology
Lasers

Modeling the 3D Printing of Nanocellulose Hydrogels

Paajanen, A., Pinomaa, T., Pajari, H., Metsä-Kortelainen, S., Lahtinen, P. & Nurmela, A., 2016.

Research output: Contribution to conferenceConference articleScientific

Hydrogels
Printing
Computational fluid dynamics
Shear deformation
Medical applications

Simulation, Optimization and Design of 3D Printed Sand Molds for Cast Metal Parts

Komi, E., Kokkonen, P., Virta, J., Puukko, P. & Metsä-Kortelainen, S., 2016.

Research output: Contribution to conferenceConference articleScientific

Molds
Sand
3D printers
Metals
Quality assurance
2015

Yrityksen kilpailukyvyn lisääminen 3D-tulostuksen avulla

Metsä-Kortelainen, S., 2015, In : Hitsaustekniikka. 65, 4, p. 24-25

Research output: Contribution to journalArticleProfessional

2014

Biomimetic building of 3D printed tailored structures

Metsä-Kortelainen, S., Vehmas, T., Lagerbom, J., Kronlöf, A., Mahlberg, R. & Heinonen, H., 2014, Espoo: VTT Technical Research Centre of Finland. 16 p. (VTT Research Report, Vol. VTT-R-00669-14).

Research output: Book/ReportReport

Open Access
Biomimetics
Printing
3D printers
Crystallization
Ointments

Material challenges in the manufacturing of tailored structures with direct write technologies

Metsä-Kortelainen, S., Ronkainen, H., Varis, T., Ruusuvuori, K., Roozeman, R., Vehmas, T., Kupiainen, V., Ahlroos, T., Lagerbom, J. & Suhonen, T., 2014, Materials Challenges and Testing for Manufacturing, Mobility, Biomedical Applications and Climate. Udomkichdecha, W., Böllinghaus, T., Manonukul, A. & Lexow, J. (eds.). Springer, p. 57-66

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Thermal spraying
Molten materials
Powders
Substrates
Hot Temperature
2013

Decay resistance of thermally modified Scots pine after 6 years' exposure above ground

Viitanen, H., Metsä-Kortelainen, S., Nurmi, A. & Jämsä, S., 2013, Proceedings IRG Annual Meeting 2013. IRG/WP 13-40624. (Proceedings IRG Annual Meeting).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

decay resistance
Pinus sylvestris
deterioration
heartwood
sapwood
2012

Durability of thermally modified Norway spruce and Scots pine in above-ground conditions

Metsä-Kortelainen, S. & Viitanen, H., 2012, The Sixth European Conference on Wood Modification: Proceedings, Electronic Edition. University of Ljubljana, p. 523-528

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

durability
Pinus sylvestris
Picea abies
deterioration
joints (wood)

Technological advances for improved properties of high performance implants with biomimetic nanostructures

Oksa, M., Ahlroos, T., Suhonen, T., Metsä-Kortelainen, S., Pelto, J. & Turunen, E., 2012, Proceedings of the 13th International Meeting and Seminar on Ceramics, Cells and Tissues. Faenza, Italy, 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Biomimetics
Nanostructures
Minerals
Composite materials
Biocompatible Materials
21 Citations (Scopus)

Wettability of sapwood and heartwood of thermally modified Norway spruce and Scots pine

Metsä-Kortelainen, S. & Viitanen, H., 2012, In : European Journal of Wood and Wood Products. 70, 1-3, p. 135-139 5 p.

Research output: Contribution to journalArticleScientificpeer-review

wettability
heartwood
sapwood
Pinus sylvestris
Picea abies
2011
3 Citations (Scopus)
Open Access
heartwood
sapwood
Pinus sylvestris
Picea abies
deterioration
14 Citations (Scopus)

Durability of thermally modified Norway spruce and Scots pine in above ground conditions

Metsä-Kortelainen, S., Paajanen, L. & Viitanen, H., 2011, In : Wood Material Science and Engineering. 6, 4, p. 163-169 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Decay (organic)
Wood
Durability
Fungi
Arsenic
2010

Decay resistance of sapwood and heartwood of thermally modified Scots pine and Norway spruce

Metsä-Kortelainen, S. & Viitanen, H., 2010, Proceedings: The Fifth European Conference on Wood Modification, ECWM5. Riga, Latvia, 20-21 Sept. 2010. p. 171-174

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

14 Citations (Scopus)

Effect of fungal exposure on the strength of thermally modified Norway spruce and Scots pine

Metsä-Kortelainen, S. & Viitanen, H., 2010, In : Wood Material Science and Engineering. 5, 1, p. 13-23 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Wood
Elastic moduli
Decay (organic)
Bending tests
Fungi

Testing of decay resistance of sapwood and heartwood of thermally modified Scots pine and Norway spruce

Viitanen, H. & Metsä-Kortelainen, S., 2010, The 41st Annual Meeting of International Research Group on Wood Protection: Biarritz, France, May 9-13 2010. IRG/WP 10-40523

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

decay resistance
heartwood
sapwood
Pinus sylvestris
Picea abies
2009
19 Citations (Scopus)

Decay resistance of sapwood and heartwood of untreated and thermally modified Scots pine and Norway spruce compared with some other wood species

Metsä-Kortelainen, S. & Viitanen, H., 2009, In : Wood Material Science and Engineering. 4, 3-4, p. 105-114 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Wood
Durability
Fungi
Decay (organic)
Dimensional stability
2008

Effect of coatings on the performance and durabiliy of birch plywood: Results after outdoor weathering and accelerated decay resistance assessment

Viitanen, H., Nurmi, A., Metsä-Kortelainen, S., Jämsä, S. & Paajanen, L., 2008.

Research output: Contribution to conferenceConference PosterScientific

2006

Service life and biological durability of wooden products, "Optikesto"

Viitanen, H., Metsä-Kortelainen, S., Saranpää, P., Laakso, T., Iitti, H., Löija, M., Paajanen, L., Harju, A. & Venäläinen, M., 2006, Applied Material Research at VTT: Symposium on Applied Materials. Espoo: VTT Technical Research Centre of Finland, p. 268-277 (VTT Symposium; No. 244).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access
durability
heartwood
molds (fungi)
Pinus
wood physical properties
148 Citations (Scopus)

The water absorption of sapwood and heartwood of Scots pine and Norway spruce heat-treated at 170 °C, 190 °C, 210 °C and 230 °C

Metsä-Kortelainen, S., Antikainen, T. & Viitaniemi, P., 2006, In : Holz als Roh- und Werkstoff. 64, 3, p. 192-197 6 p.

Research output: Contribution to journalArticleScientificpeer-review

heartwood
sapwood
Water absorption
Pinus sylvestris
Picea abies
2005

Käyttöohjeita lämpöpuulle

Metsä-Kortelainen, S., 2005, In : Puu. 2, 32.

Research output: Contribution to journalArticleProfessional