Tatu Pinomaa

2024

Influence of laser beam shaping on the cracking behavior of tungsten at single weld lines

Stoll, T. (Corresponding Author), Schmitt, M., Lohr, L., Lürbke, R., Müller, A. V., Pinomaa, T., Grünewald, J., Laukkanen, A., Wudy, K. & Neu, R., Dec 2024, In: International Journal of Refractory Metals and Hard Materials. 125, 106864.

Research output: Contribution to journal › Article › Scientific › peer-review

Open Access

OpenPFC: An open-source framework for high performance 3D phase field crystal simulations

Pinomaa, T. (Corresponding Author), Aho, J., Suviranta, J., Jreidini, P., Provatas, N. & Laukkanen, A., Jun 2024, In: Modelling and Simulation in Materials Science and Engineering. 32, 4, 22 p., 045002.

Research output: Contribution to journal › Article › Scientific › peer-review

Open Access

File

1 Citation (Scopus)

34 Downloads (Pure)

2023

Chromium-based bcc-superalloys strengthened by iron supplements

Ma, K., Blackburn, T., Magnussen, J. P., Kerbstadt, M., Ferreirós, P. A., Pinomaa, T., Hofer, C., Hopkinson, D. G., Day, S. J., Bagot, P. A. J., Moody, M. P., Galetz, M. C. & Knowles, A. J. (Corresponding Author), 3 Aug 2023, In: Acta Materialia. 257, 119183.

Research output: Contribution to journal › Article › Scientific › peer-review

Open Access

5 Citations (Scopus)

Modelling of the Solidifying Microstructure of Inconel 718: Quasi-Binary Approximation

Kropotin, N., Fang, Y., Yu, C., Seyring, M., Freiberg, K., Lippmann, S., Pinomaa, T., Laukkanen, A., Provatas, N. & Galenko, P. K. (Corresponding Author), Jan 2023, In: Modelling. 4, 3, p. 323-335

Research output: Contribution to journal › Article › Scientific › peer-review

Open Access

1 Citation (Scopus)

2022

An atomistic simulation study of rapid solidification kinetics and crystal defects in dilute Al–Cu alloys

Haapalehto, M., Pinomaa, T., Wang, L. & Laukkanen, A., 15 Jun 2022, In: Computational Materials Science. 209, 111356.

Research output: Contribution to journal › Article › Scientific › peer-review

Open Access

File

10 Citations (Scopus)

103 Downloads (Pure)

Dislocation density in cellular rapid solidification using phase field modeling and crystal plasticity

Lindroos, M. (Corresponding Author), Pinomaa, T., Ammar, K., Laukkanen, A., Provatas, N. & Forest, S., 2022, In: International Journal of Plasticity. 148, 103139.

Research output: Contribution to journal › Article › Scientific › peer-review

Open Access

File

33 Citations (Scopus)

101 Downloads (Pure)

Experimental and Calphad Methods for Evaluating Residual Stresses and Solid-State Shrinkage after Solidification

Antikainen, A. (Corresponding Author), Reijonen, J., Lagerbom, J., Lindroos, M., Pinomaa, T. & Lindroos, T., Nov 2022, In: Metals. 12, 11, 1894.

Research output: Contribution to journal › Article › Scientific › peer-review

Open Access

3 Citations (Scopus)

Laser Powder Bed Fusion Of High Carbon Tool Steels

Reijonen, J., Antikainen, A., Lagerbom, J., Lindroos, M., Pinomaa, T. & Lindroos, T., 2022, World PM 2022 Congress Proceedings. European Powder Metallurgy Association (EPMA)

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

1 Citation (Scopus)

Multiscale analysis of crystalline defect formation in rapid solidification of pure aluminium and aluminium-copper alloys

Pinomaa, T. (Corresponding Author), Lindroos, M., Jreidini, P., Haapalehto, M., Ammar, K., Wang, L., Forest, S., Provatas, N. & Laukkanen, A., 21 Feb 2022, In: Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences. 380, 2217, 20 p., 20200319.

Research output: Contribution to journal › Article › Scientific › peer-review

Open Access

11 Citations (Scopus)

Numerical Design Of High Entropy Super Alloy Using Multiscale Materials Modeling And Deep Learning

Andersson, T. (Corresponding author), Laukkanen, A., Suhonen, T., Lindroos, M., Pinomaa, T. & Kaipainen, J., Oct 2022, World PM2022 Congress Proceedings. European Powder Metallurgy Association (EPMA), 188680

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

Opportunities Of Physics-Based Multi-Scale Modeling Tools In Assessing Intra-Grain Heterogeneities, Polycrystal Properties And Residual Stresses Of AM Metals

Lindroos, M. (Corresponding author), Pinomaa, T., Laukkanen, A., Antikainen, A., Lagerbom, J., Reijonen, J., Lindroos, T. & Andersson, T., 2022, World PM 2022 Congress Proceedings. European Powder Metallurgy Association (EPMA)

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

Single-Track Laser Scanning as a Method for Evaluating Printability: The Effect of Substrate Heat Treatment on Melt Pool Geometry and Cracking in Medium Carbon Tool Steel

Antikainen, A. (Corresponding Author), Reijonen, J., Lagerbom, J., Lindroos, M., Pinomaa, T. & Lindroos, T., Oct 2022, In: Journal of Materials Engineering and Performance. 31, 10, p. 8418-8432 15 p.

Research output: Contribution to journal › Article › Scientific › peer-review

Open Access

File

3 Citations (Scopus)

49 Downloads (Pure)

2021

Micromechanical modeling approach to single track deformation, phase transformation and residual stress evolution during selective laser melting using crystal plasticity

Lindroos, M. (Corresponding Author), Pinomaa, T., Antikainen, A., Lagerbom, J., Reijonen, J., Lindroos, T., Andersson, T. & Laukkanen, A., Feb 2021, In: Additive Manufacturing. 38, 101819.

Research output: Contribution to journal › Article › Scientific › peer-review

30 Citations (Scopus)

Orientation Gradients in Rapidly Solidified Pure Aluminum Thin Films: Comparison of Experiments and Phase-Field Crystal Simulations

Jreidini, P., Pinomaa, T., Wiezorek, J. M. K., McKeown, J. T., Laukkanen, A. & Provatas, N., 12 Nov 2021, In: Physical Review Letters. 127, 20, 6 p., 205701.

Research output: Contribution to journal › Article › Scientific › peer-review

Open Access

21 Citations (Scopus)

Quantitative phase field simulations of polycrystalline solidification using a vector order parameter

Pinomaa, T., Ofori-Opoku, N., Laukkanen, A. & Provatas, N., May 2021, In: Physical review E. 103, 5, 053310.

Research output: Contribution to journal › Article › Scientific › peer-review

2 Citations (Scopus)

2020

Development and validation of coupled erosion-corrosion model for wear resistant steels in environments with varying pH

Laukkanen, A. (Corresponding Author), Lindgren, M., Andersson, T., Pinomaa, T. & Lindroos, M., Nov 2020, In: Tribology International. 151, 106534.

Research output: Contribution to journal › Article › Scientific › peer-review

14 Citations (Scopus)

Modelling selective laser melting machine configurations

Andersson, T., Laukkanen, A. & Pinomaa, T., Jan 2020, Congress proceedings Euro PM2018 Congress & Exhibition. European Powder Metallurgy Association (EPMA)

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

Phase field modeling of rapid resolidification of Al-Cu thin films

Pinomaa, T. (Corresponding Author), McKeown, J., Wiezorek, J., Provatas, N., Laukkanen, A. & Suhonen, T., 15 Feb 2020, In: Journal of Crystal Growth. 532, 125418.

Research output: Contribution to journal › Article › Scientific › peer-review

Open Access

38 Citations (Scopus)

Redesign mineral and metal loops

Huttunen-Saarivirta, E., Karhu, M., Kinnunen, P., Pinomaa, T. & Kivikytö-Reponen, P., 2020, In: Materia. 2, p. 26-29

Research output: Contribution to journal › Article › Professional

Open Access

Solute trapping in rapid solidification

Pinomaa, T., Laukkanen, A. & Provatas, N., 1 Nov 2020, In: MRS Bulletin. 45, 11, p. 910–915

Research output: Contribution to journal › Review Article › peer-review

21 Citations (Scopus)

The significance of spatial length scales and solute segregation in strengthening rapid solidification microstructures of 316L stainless steel

Pinomaa, T. (Corresponding Author), Lindroos, M., Walbrühl, M., Provatas, N. & Laukkanen, A., 1 Feb 2020, In: Acta Materialia. 184, p. 1-16

Research output: Contribution to journal › Article › Scientific › peer-review

111 Citations (Scopus)

2019

Data-Driven Optimization Of Metal Additive Manufacturing Solutions

Laukkanen, A., Pinomaa, T., Andersson, T., Lindroos, M., Yashchuk, I. & Suhonen, T., Oct 2019, Euro PM2019 Proceedings. European Powder Metallurgy Association (EPMA), 167182

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

Micromechanical Modeling-Based Damage Laws for Fatigue Design of Additively Manufactured IN718 Alloy

Laukkanen, A., Pinomaa, T., Lindroos, M. & Andersson, T., Jun 2019, Advances in Additive Manufacturing with Powder Metallurgy: Proceedings of the 2019 Powder Metallurgy Conference. Brochu, M. & Kotila, J. (eds.).

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

On The Linking Performance Evaluation Toolset To Process-structure-properties Mapping Of Selective Laser Melting 316L Stainless Steel Using Micromechanical Approach With A Length-scale Dependent Crystal Plasticity

Lindroos, M., Pinomaa, T., Andersson, T., Yashchuk, I. & Laukkanen, A., Oct 2019, Euro PM2019 Proceedings. European Powder Metallurgy Association (EPMA), 167182

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

Process-Structure-Properties Modeling of Selective Laser Melted Maraging Steel Using Phase-Field Method and Crystal Plasticity

Pinomaa, T., Lindroos, M., Andersson, T. & Laukkanen, A., Jun 2019, Advances in Additive Manufacturing with Powder Metallurgy: Proceedings of the 2019 Powder Metallurgy Conference. Brochu, M. & Kotila, J. (eds.).

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

Process-Structure-Properties-Performance Modeling for Selective Laser Melting

Pinomaa, T. (Corresponding Author), Yashchuk, I., Lindroos, M., Andersson, T., Provatas, N. & Laukkanen, A., 24 Oct 2019, In: Metals. 9, 11, 1138.

Research output: Contribution to journal › Article › Scientific › peer-review

Open Access

36 Citations (Scopus)

Quantitative phase field modeling of solute trapping and continuous growth kinetics in quasi-rapid solidification

Pinomaa, T. (Corresponding Author) & Provatas, N., 12 Feb 2019, In: Acta Materialia. 168, p. 167-177 11 p.

Research output: Contribution to journal › Article › Scientific › peer-review

66 Citations (Scopus)

2018

Micromechanical model for fatigue limit of metal AM parts and materials

Laukkanen, A., Andersson, T., Lindroos, M. & Pinomaa, T., 2018, Euro PM 2018 Congress and Exhibition. European Powder Metallurgy Association (EPMA)

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

Process-to-structure mapping of selective laser melting of a nickel based superalloy via phase field modelling

Pinomaa, T., Andersson, T. & Laukkanen, A., 2018, Euro PM 2018 Congress and Exhibition. European Powder Metallurgy Association (EPMA)

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

1 Citation (Scopus)

Quantitative 3D phase field modelling of solidification using next-generation adaptive mesh refinement

Greenwood, M. (Corresponding Author), Shampur, K. N., Ofori-Opoku, N., Pinomaa, T., Wang, L., Gurevich, S. & Provatas, N., 1 Feb 2018, In: Computational Materials Science. 142, p. 153-171 19 p.

Research output: Contribution to journal › Article › Scientific › peer-review

Open Access

48 Citations (Scopus)

2017

3D-printable bioactivated nanocellulose-alginate hydrogels

Leppiniemi, J., Lahtinen, P., Paajanen, A., Mahlberg, R., Metsä-Kortelainen, S., Pinomaa, T., Pajari, H., Vikholm-Lundin, I., Pursula, P. & Hytönen, V., 2017, In: ACS Applied Materials & Interfaces. 9, 26, p. 21959-21970

Research output: Contribution to journal › Article › Scientific › peer-review

284 Citations (Scopus)

Integrated computational materials engineering for emerging manufacturing technologies

Andersson, T., Laukkanen, A., Sippola, M., Majaniemi, S., Pinomaa, T. & Suhonen, T., 2017, Towards a new era in manufacturing: Final report of VTT's For Industry spearhead programme. Paasi, J. (ed.). VTT Technical Research Centre of Finland, p. 66-71 (VTT Technology, Vol. 288).

Research output: Chapter in Book/Report/Conference proceeding › Chapter or book article › Professional

Micromechanical modeling of failure behavior of metallic materials

Laukkanen, A. (Corresponding Author), Lindroos, M., Andersson, T., Verho, T. & Pinomaa, T., 2017, In: Journal of Structural Mechanics. 50, 3, p. 271–274

Research output: Contribution to journal › Article › Scientific › peer-review

Open Access

File

28 Downloads (Pure)

2016

Component scale process model for metal additive manufacturing

Andersson, T., Laukkanen, A., Pinomaa, T., Laakso, P., Puukko, P., Lindroos, T. & Laitinen, T., 2016, World PM2016 Proceedings. European Powder Metallurgy Association (EPMA)

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

Effective interface model for design and tailoring of wc-co microstructures

Laukkanen, A., Pinomaa, T., Holmberg, K. & Andersson, T., 2016, In: Powder Metallurgy. 59, 1, p. 20-30

Research output: Contribution to journal › Article › Scientific › peer-review

14 Citations (Scopus)

Modeling chloride ingress under freeze-thaw loading – 3D fem approach

Laukkanen, A., Pinomaa, T., Andersson, T., Ferreira, M. & Bohner, E., 2016, Fib Symposium 2016: Performance-Based Approaches for Concrete Structures, Proceedings. Beushausen, H. (ed.). p. 1-10 10 p. (fib Symposium).

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

Modeling the 3D Printing of Nanocellulose Hydrogels

Paajanen, A., Pinomaa, T., Pajari, H., Metsä-Kortelainen, S., Lahtinen, P. & Nurmela, A., 2016.

Research output: Contribution to conference › Conference article › Scientific

Modelling chloride ingress under freeze-thaw loading: 3D FEM approach

Laukkanen, A., Pinomaa, T., Andersson, T., Ferreira, M. & Bohner, E., 2016. 8 p.

Research output: Contribution to conference › Conference article › Scientific

Multiscale interface model for design of nano-microstructures in hard materials

Laukkanen, A., Pinomaa, T., Andersson, T., Paajanen, A., Lindroos, T. & Holmberg, K., 2016, World PM2016 Proceedings. European Powder Metallurgy Association (EPMA)

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

Multiscale materials modeling for metal additive manufacturing

Laukkanen, A., Andersson, T., Pinomaa, T., Majaniemi, S., Sippola, M. & Suhonen, T., 2016.

Research output: Contribution to conference › Other conference contribution › Scientific

Multiscale Materials Modeling of Coatings

Suhonen, T., Laukkanen, A., Andersson, T., Pinomaa, T. & Holmberg, K., 2016, p. 20-23.

Research output: Contribution to conference › Conference article › Scientific

Process model for metal additive manufacturing

Andersson, T., Laukkanen, A. & Pinomaa, T., 2016.

Research output: Contribution to conference › Conference article › Scientific

VTT ProperTune: Computational multiscale materials modeling concept

Suhonen, T., Laukkanen, A., Andersson, T., Pinomaa, T. & Holmberg, K., 23 May 2016

Research output: Non-textual form › Web publication/site › Professional

Open Access

VTT ProperTune: Computational Multiscale Materials Modeling Concept

Suhonen, T., Laukkanen, A., Andersson, T., Pinomaa, T. & Holmberg, K., 2016, In: Thermal Spray Bulletin. 68, 2, p. 102-106

Research output: Contribution to journal › Article › Scientific › peer-review

2015

Carbonization of cellulose fibre precursors: experimental and modelling efforts

Heikkilä, P., Valta, K., Vehviläinen, M., Kamppuri, T., Orell, O., Kakkonen, M., Pasanen, A. T., Honkanen, M., Paajanen, A., Pinomaa, T., Vaari, J., Vippola, M., Vuorinen, J. & Harlin, A., 2015.

Research output: Contribution to conference › Conference article › Scientific

Carbon materials from bio-based and tailored precursors

Pasanen, A. T., Wikberg, H., Paajanen, A., Pinomaa, T., Vaari, J., Heikkilä, P. & Harlin, A., 2015. 16 p.

Research output: Contribution to conference › Other conference contribution › Scientific

Open Access

1 Citation (Scopus)

Phase field analysis of solidification structures and interface composition in WC-Co hard metals

Pinomaa, T., Ofori-Opoku, N., Gurevich, S., Laukkanen, A. & Provatas, N., 2015, EURO PM2015 congress proceedings. European Powder Metallurgy Association (EPMA)

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

2 Citations (Scopus)

Tatu Pinomaa

Research output

Search results