Timo Malm

1987 …2019
If you made any changes in Pure these will be visible here soon.

Research Output 1987 2019

1987

Hätäpysäyttimien käyttövarmuus

Tiusanen, R., Virolainen, K. & Malm, T., 1987, Espoo: VTT Technical Research Centre of Finland. 80 p. (Valtion teknillinen tutkimuskeskus. Tiedotteita; No. 782).

Research output: Book/ReportReport

1988

Safety equipment for human detection

Kuivanen, R., Malm, T., Määttä, T., Suominen, J. & Tiusanen, R., 1988, Espoo: VTT Technical Research Centre of Finland. 40 p. (Valtion teknillinen tutkimuskeskus. Tiedotteita; No. 867).

Research output: Book/ReportReport

Microwave sensors
Detectors
Ultrasonics
1989

Induktiivisten lähestymiskytkimien käyttövarmuus ja soveltuvuus turvalaitekäyttöön

Tiusanen, R., Malm, T. & Lehtelä, M., 1989, Espoo: VTT Technical Research Centre of Finland. 70 p. (Valtion teknillinen tutkimuskeskus. Tiedotteita; No. 933).

Research output: Book/ReportReport

Tekstiili- ja vaatetusteollisuuden puristimien turvallisuus

Silvola, M., Malm, T. & Tarvainen, H., 1989, Espoo: VTT Technical Research Centre of Finland. 48 p. (Valtion teknillinen tutkimuskeskus. Tiedotteita; No. 976).

Research output: Book/ReportReport

Turva-anturi valittava tarkkaan

Malm, T., 1989, In : Työ, terveys, turvallisuus. 19, 15, p. 23-33

Research output: Contribution to journalArticleProfessional

1990

Piirisimulointiohjelmistojen käyttömahdollisuudet elektronisten analogiapiirien vika- ja vaikutusanalyysissä

Translated title of the contribution: Circuit simulation programs as the tools of failure mode and effect analysis of analog electronic circuitsLehtelä, M., Malm, T. & Tiusanen, R., 1990, Espoo: VTT Technical Research Centre of Finland. 58 p. (Valtion teknillinen tutkimuskeskus. Tiedotteita; No. 1123).

Research output: Book/ReportReport

Circuit simulation
Failure modes
Networks (circuits)
1992

Koneen liikkeeltä suojeleva turvalaite

Heinonen, I. & Malm, T., 1992, In : Tekniikan tekijät. Lokakuu, 32, 33, 35.

Research output: Contribution to journalArticleProfessional

1993

Autonomisen koneen adaptiivinen turvajärjestelmä

Känsälä, K. & Malm, T., 1993, Espoo: VTT Technical Research Centre of Finland. 70 p. (VTT Julkaisuja - Publikationer; No. 783).

Research output: Book/ReportReport

Safety
1994

Pneumaattisten robottien turvallisuus

Translated title of the contribution: Safety of pneumatic robotsMalm, T., 1994, Espoo: VTT Technical Research Centre of Finland. 53 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 1599).

Research output: Book/ReportReport

robots
Olla
1995

Nosturin yhdistettyjen ajotoimintojen vaikutus nostotyön turvallisuuteen

Translated title of the contribution: The effect of partial automation on cranesMalm, T., Vanhala, M. & Kivipuro, M., 1995, Espoo: VTT Technical Research Centre of Finland. 70 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 1675).

Research output: Book/ReportReport

automation
1996

Siirrettävät varoitus- ja turvalaitteet

Translated title of the contribution: Portabe warning and emerging devicesMalm, T. & Sauni, S., 1996, Espoo: VTT Technical Research Centre of Finland. 51 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 1774).

Research output: Book/ReportReport

Open Access
Olla
1997

Pneumatiikan turvallisuus

Translated title of the contribution: The safety of pneumatic actuatorsMalm, T. & Järvenpää, J., 1997, In : Automaatioväylä. 5, p. 25-26

Research output: Contribution to journalArticleProfessional

1998

Laajojen koneautomaatiojärjestelmien turvallisuus

Translated title of the contribution: Safety of large automation systemsMalm, T., Kivipuro, M. & Tiusanen, R., 1998, Espoo: VTT Technical Research Centre of Finland. 71 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 1938).

Research output: Book/ReportReport

Open Access
automation
2 Citations (Scopus)

Pneumatiikalla toteutetun kappaletavara-automaation turvallisuus

Translated title of the contribution: Safety of pneumatic manufacturing automationMalm, T. & Järvenpää, J., 1998, Espoo: VTT Technical Research Centre of Finland. 72 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 1886).

Research output: Book/ReportReport

Open Access
automation
manufacturing
2000

Laajojen tuotantojärjestelmien turvallisuus

Translated title of the contribution: The safety of large manufacturing systemsMalm, T., 2000, In : Teollisuuden näytelehti. 7, p. 10-11

Research output: Contribution to journalArticleProfessional

Safety validation of complex components: Validation by analysis

Malm, T. & Kivipuro, M., 2000, Espoo: VTT Technical Research Centre of Finland. 52 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 2022).

Research output: Book/ReportReport

Open Access
Failure modes
Life cycle
Electronic equipment
Hardware
Testing
2001

Paperiteollisuuden rullankäsittelyn turvallisuus ja luotettavuus

Translated title of the contribution: The safety and reliability of roll handling in paper millsMalm, T., Hämäläinen, V. & Kivipuro, M., 2001, Espoo: VTT Technical Research Centre of Finland. 84 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 2117).

Research output: Book/ReportReport

Open Access
pulp and paper mills
Olla
Mene
2002

Paperitehtaiden rullankäsittelyn turvallisuus

Malm, T., 2002, In : Kunnossapito. 2, p. 32-34

Research output: Contribution to journalArticleProfessional

2003

Turvasignaalit väylää pitkin - modernilla tekniikalla taataan turvallisuutta

Translated title of the contribution: Safety signals via bus - Modern technology ensures safetyMalm, T. & Hietikko, M., 2003, In : Automaatioväylä. 19, 1, p. 18-19

Research output: Contribution to journalArticleProfessional

2004

Safety of Digital Communications in Machines

Alanen, J., Hietikko, M. & Malm, T., 2004, Espoo: VTT Technical Research Centre of Finland. 98 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 2265).

Research output: Book/ReportReport

Open Access
Communication
Automation
Communication systems
Safety engineering
Distributed parameter control systems

Turvallisuuteen liittyvät ohjausjärjestelmät konesovelluksissa: Esimerkkejä

Malm, T. & Kivipuro, M., 2004, Espoo: VTT Technical Research Centre of Finland. 99 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 2264).

Research output: Book/ReportReport

Open Access
2006

Turvallisuustietoinen koneiden ja tuotantolinjojen modernisointiprosessi

Malm, T. & Hämäläinen, V., 2006, Espoo: VTT Technical Research Centre of Finland. 60 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 2359).

Research output: Book/ReportReport

Open Access
moder
modernization
2007

Turvallisuustietoinen koneen modernisointiprosessi

Malm, T., 2007, In : Kunnossapito. 21, 2, p. 35-37

Research output: Contribution to journalArticleProfessional

2008

Man-Robot Cooperation: New Technologies and New Solutions

Salmi, T., Marstio, I., Malm, T. & Laine, E., 2008, Proceedings of the 4th International Precision Assembly Seminar, IPAS 2008: Micro-Assembly Technologies and Applications. Ratchev, S. & Koelemeijer, S. (eds.). New York: Springer, p. 385-394

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Robots
Security systems
Sensors

Robottijärjestelmien uudet turvallisuustekniikat

Malm, T., 2008.

Research output: Contribution to conferenceOther conference contributionProfessional

Open Access

Vuorovaikutteisen robotiikan turvallisuus

Malm, T., 2008. 16 p.

Research output: Contribution to conferenceConference articleScientific

Open Access

Vuorovaikutteisen robotiikan turvallisuus

Malm, T., Viitaniemi, J., Marstio, I., Toivonen, S., Koskinen, J., Venho, O., Salmi, T., Laine, E. & Latokartano, J., 2008, Helsinki. 188 p.

Research output: Book/ReportReport

2009

Kokemuksia koneiden ohjausjärjestelmien turvallisuuden suoritustason (PL) laskemisesta

Malm, T., Hietikko, M. & Alanen, J., 2009, Automaatio XVIII seminaari 2009. Helsinki, 6 p. (Suomen automaatioseura. Julkaisusarja; No. 36).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Open Access

Safety-conscious modernising process of automated machinery

Hietikko, M., Malm, T., Vanhala, M. & Venho, O., 2009, Scientific activities in Safety & Security 2009. Rouhiainen, V. (ed.). VTT Technical Research Centre of Finland, p. 62-63

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

Safety-critical software in machinery

Malm, T., Hietikko, M., Alanen, J., Vepsäläinen, T. & Katara, M., 2009, Scientific activities in Safety & Security 2009. Rouhiainen, V. (ed.). VTT Technical Research Centre of Finland, p. 64-65

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

Turvallisuusprosessin referenssimalli koneenohjausjärjestelmien suunnitteluun

Alanen, J., Malm, T. & Hietikko, M., 2009. 6 p.

Research output: Contribution to conferenceConference articleScientific

2010

A safety process reference model and tool for the development of machine control systems

Hietikko, M., Alanen, J. & Malm, T., 2010, SIAS 2010: The 6th International Conference on Safety of Industrial Automated Systems, Tampere, 14.-15.6.2010. 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Control systems
Safety engineering
User interfaces
Hazards
Web browsers

Automaatio liiketoimintaprosessien tukena

Ylén, J-P., Ventä, O., Tommila, T., Lappalainen, J., Hirvonen, J., Karhela, T., Paljakka, M., Lehtinen, H., Heilala, J., Peltonen, J., Malm, T., Valkonen, J., Voho, P. & Savioja, P., 2010, Helsinki: TEKES. 112 p. (Tekesin katsaus, Vol. 271).

Research output: Book/ReportReport

Performance level calculation of machine control systems: Experiences

Hietikko, M. & Malm, T., 2010, SIAS 2010: The 6th International Conference on Safety of Industrial Automated Systems, Tampere, 14.-15.6.2010. 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Control systems
Risk analysis
Macros
11 Citations (Scopus)

Safety of interactive robotics: Learning from accidents

Malm, T., Viitaniemi, J., Latokartano, J., Lind, S., Venho-Ahonen, O. & Schabel, J., 2010, In : International Journal of Social Robotics. 2, 3, p. 221-227 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Accidents
Robotics
Robots
Crushing
Hazards

Safety-related systems in machinery: Variety of software

Malm, T., Hietikko, M. & Alanen, J., 2010, SIAS 2010: The 6th International Conference on Safety of Industrial Automated Systems, Tampere, 14.-15.6.2010. Helsinki, 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Machinery
Iterative methods
Software engineering
Defects
Industry
2011
20 Citations (Scopus)

Risk estimation studies in the context of a machine control function

Hietikko, M., Malm, T. & Alanen, J., 2011, In : Reliability Engineering and System Safety. 96, 7, p. 767-774 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Control systems
Risk analysis
Costs
1 Citation (Scopus)

Safety-critical software in machinery applications

Malm, T., Vuori, M., Rauhamäki, J., Vepsäläinen, T., Koskinen, J., Seppälä, J., Virtanen, H., Hietikko, M. & Katara, M., 2011, Espoo: VTT Technical Research Centre of Finland. 127 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 2601).

Research output: Book/ReportReport

Open Access
Machinery
Codes (standards)
Statistics
Defects
Formal methods
2012

Adaptive safety concepts for automated mobile work machine systems: Simulator assisted research approach

Tiusanen, R., Malm, T. & Ronkainen, A., 2012, Proceedings of the 7th International Conference on the Safety of Industrial Automated Systems : SIAS 2012. Montreal, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Simulators
Plant shutdowns
Risk assessment

Comparing safety requirement sources of machinery software

Malm, T., Hietikko, M. & Rauhamäki, J., 2012, 11th International Probabilistic Safety Assessment and Management Conference and the Annual European Safety and Reliability Conference 2012 PSAM11 ESREL 2012, Helsinki, Finland, 25-29 June, 2012. Red Hook, NY: Curran Associates Inc.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Machinery
Specifications
Software design
Risk assessment
Defects

Evaluating performance levels of machine control functions

Hietikko, M., Malm, T., Alanen, J. & Saha, H., 2012, Proceedings of the 7th International Conference on the Safety of Industrial Automated Systems: SIAS 2012. Montreal, p. 121-126

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Pneumatics
Machinery
Cables
Hydraulics
Control systems

Safety challenges of transferable robotic systems

Salmi, T., Väätäinen, O., Malm, T. & Montonen, J., 2012, Proceedings: 7th German Conference on Robotics, ROBOTIK 2012.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Robotics
Security systems
Computer vision
Robots
Controllers

Safety functions of automated mobile work machines

Malm, T., Hietikko, M., Tiusanen, R. & Ronkainen, A., 2012, Proceedings of the 7th International Conference on the Safety of Industrial Automated Systems: SIAS 2012. Montreal, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Security systems
Automation
Sensors
Accidents
Uncertainty
2013

Evaluating performance levels of machine control functions

Hietikko, M., Malm, T., Alanen, J. & Saha, H., 2013, In : CAN Newsletter. 2, June, p. 32-37 6 p.

Research output: Contribution to journalArticleProfessional

Open Access
Pneumatics
Hydraulics

Koneen turvallisuusvaatimusten kehittyminen käyttöönotosta nykyhetkeen

Malm, T., 2013, In : Promaint. 27, 5, p. 28-30 3 p.

Research output: Contribution to journalArticleProfessional

Meeting new challenges and possibilities with modern robot safety technologies

Salmi, T., Väätäinen, O., Malm, T., Montonen, J. & Marstio, I., 2013, Enabling Manufacturing Competitiveness and Economic Sustainability. Zaeh, M. F. (ed.). Springer, p. 183-188

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Robots
Security systems
Sensors
Computer vision
Robotics

Modernisoinnin edut ja haasteet

Malm, T., 2013.

Research output: Contribution to conferenceConference articleProfessional

Safe performance of automated mobile work machines

Malm, T., Hietikko, M., Tiusanen, R. & Ronkainen, A., 2013, Automation and Systems without Borders - beyond Future: Publication series of FSA No. 42. 6

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Automation

Safety requirements for machine software

Malm, T. & Hietikko, M., 2013, Research highlights in safety and security. Espoo: VTT Technical Research Centre of Finland, p. 70-71 (VTT Research Highlights; No. 10).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access
Machinery
Accidents
Wire
Hardware