Projects per year
Project Details
Description
Enhancing the quality and efficiency of industrial computed tomography (CT) measurements.
Computed tomography (CT) allows the complete geometry of objects to be determined. However, quicker and more accurate techniques are needed to provide practical industrial CT scanning.
Project improves the quality and efficiency of CT measurements and produces fast CT methods to reduce measurement time.
VTT MIKES develops a reference standard for internal areal surface roughness measurements and characterisation methods for geometry errors of industrial cone beam CT systems.
Call 2017: Metrology for Industry
This project has received funding from the EMPIR programme co-financed by the Participating States and from the European Union’s Horizon 2020 research and innovation programme.
Computed tomography (CT) allows the complete geometry of objects to be determined. However, quicker and more accurate techniques are needed to provide practical industrial CT scanning.
Project improves the quality and efficiency of CT measurements and produces fast CT methods to reduce measurement time.
VTT MIKES develops a reference standard for internal areal surface roughness measurements and characterisation methods for geometry errors of industrial cone beam CT systems.
Call 2017: Metrology for Industry
This project has received funding from the EMPIR programme co-financed by the Participating States and from the European Union’s Horizon 2020 research and innovation programme.
| Acronym | AdvanCT |
|---|---|
| Status | Finished |
| Effective start/end date | 1/06/18 → 30/11/21 |
Collaborative partners
- German National Metrology Institute (PTB) (lead)
- BA66 National metrology institute VTT MIKES
- Federal Institute for Materials Research and Testing Berlin (BAM) (Project partner)
- Danish Technological Institute (DTI) (Project partner)
- University of Zagreb (Project partner)
- Laboratoire National de Métrologie et d’Essais (LNE) (Project partner)
- Federal Institute of Metrology (METAS) (Project partner)
- National Physical Laboratory (NPL) (Project partner)
- Commissariat a l'Energie Atomique et aux Energies Alternatives (CEA) (Project partner)
- Swiss Federal Laboratories for Materials Science and Technology (EMPA) (Project partner)
- Friedrich-Alexander-Universität Erlangen-Nürnberg (Project partner)
- University of Bath (Project partner)
- University of Nottingham (Project partner)
- University of Southampton (Project partner)
- Robert Bosch GmbH (Project partner)
- LEGO System A/S (Project partner)
- Novo Nordisk A/S (Project partner)
- Volume Graphics GmbH (Project partner)
- Werth Messtechnik GmbH (Project partner)
- YXLON International GmbH (Project partner)
- Carl Zeiss Industrielle Messtechnik GmbH (Project partner)
Funding
- EURAMET e.V.
Keywords
- computed tomography (CT)
- reference standard
- dimensional measurement
- surface measurement
Projects
- 1 Active
-
EMPIR: European Metrology Programme for Innovation and Research (EMPIR)
Heinonen, M. (Owner) & Nyholm, K. (PI)
15/05/14 → 31/12/24
Project: EU project