Projects per year
Project Details
Description
Reliable thermometry for process control
Most industrial processes rely on temperature measurement, which directly influences product quality, energy efficiency and emissions. However, all conventional temperature sensors exhibit calibration drift leading to process control problems, sub-optimal emissions and reduced efficiency.
Project implements embedded traceable thermometry in-situ through driftless practical primary thermometry & self-validation, gas/combustion thermometry, and new techniques to enable traceable 2D surface temperature measurement to solve process control challenges.
VTT MIKES concentrates to develop an AI-assisted low-cost insert for dry-block calibrators. This instrument aims to act as a comparator, linking phosphor thermometry with thermal imaging techniques.
Call 2023: Metrology for Industry
The project (23FUN11) has received funding from the European Partnership on Metrology, co-financed from the European Union’s Horizon Europe Research and Innovation Programme and by the Participating States.
Most industrial processes rely on temperature measurement, which directly influences product quality, energy efficiency and emissions. However, all conventional temperature sensors exhibit calibration drift leading to process control problems, sub-optimal emissions and reduced efficiency.
Project implements embedded traceable thermometry in-situ through driftless practical primary thermometry & self-validation, gas/combustion thermometry, and new techniques to enable traceable 2D surface temperature measurement to solve process control challenges.
VTT MIKES concentrates to develop an AI-assisted low-cost insert for dry-block calibrators. This instrument aims to act as a comparator, linking phosphor thermometry with thermal imaging techniques.
Call 2023: Metrology for Industry
The project (23FUN11) has received funding from the European Partnership on Metrology, co-financed from the European Union’s Horizon Europe Research and Innovation Programme and by the Participating States.
| Acronym | ThermoSI |
|---|---|
| Status | Active |
| Effective start/end date | 1/09/24 → 31/08/27 |
Collaborative partners
- VTT Technical Research Centre of Finland (lead)
- Danish Technological Institute (DTI) (Project partner)
- Czech Metrology Institute (CMI) (Project partner)
- German National Metrology Institute (PTB) (Project partner)
- Slovak Institute of Metrology (SMU) (Project partner)
- University of Ljubljana (Project partner)
- Technical University of Denmark (DTU) (Project partner)
- Metrosol Limited (Project partner)
- National Physics Laboratory (NPL) (Project partner)
- National Scientific Center “Institute of Metrology” (NSC-IM) (Project partner)
- Otto-von-Guericke University Magdeburg (Project partner)
- University of Strathclyde (Project partner)
- University of Manchester (Project partner)
- BAE Systems Marine Limited (Project partner)
- Beamex Oy Ab (Project partner)
- CCPI Europe Ltd (Project partner)
Funding category
- Horizon Europe
Keywords
- Temperature
- Johnson noise thermometry
- practical primary thermometry
- phosphor thermometry
- thermal imaging
- surface thermometry
- gas thermometry
- artificial intelligence
- process efficiency
Projects
- 1 Active
-
European Partnership on Metrology
Heinonen, M. (Owner) & Nyholm, K. (PI)
EURAMET e.V. - European Partnership on Metrology
1/11/21 → 31/12/31
Project: Research