Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters

A comparison of HE and SCC sesceptibility of an age hardenable nickelbase alloy

Kekkonen, T., Hänninen, H. & Tähtinen, S., 1986, Proceedings of the 1986 Workshop on advanced high-strength materials. Gennaro, M. & Nelson, J. (eds.). Palo Alto, 19 p. 13. (EPRI Report; No. NP-6363).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

A comparison of humidity standards at seven European national standards laboratories

Heinonen, M., 2002, In : Metrologia. 39, 3, p. 303-308

Research output: Contribution to journalArticleScientificpeer-review

8 Citations (Scopus)

A comparison of intergrinding and blending limestone on reaction and strength evolution in cementitious materials

Kumar, A., Oey, T., Puerta Falla, G., Henkensiefken, R., Neithalath, N. & Sant, G., Jun 2013, In : Construction and Building Materials. 43, p. 428-435

Research output: Contribution to journalArticleScientificpeer-review

40 Citations (Scopus)

A comparison of sensitivity standards in form metrology: Final results of the EURAMET project 649

Jusko, O., Bosse, H., Flack, D., Hemming, B., Pisani, M. & Thalmann, R., 2012, In : Measurement Science and Technology. 23, 5, 054006.

Research output: Contribution to journalArticleScientificpeer-review

8 Citations (Scopus)

A comparison of the structure, pyrolysis and burning properties of Indonesian and Finnish peat

Aho, M., 1988, Research in Thermochemical Biomass Conversion. Bridgewater, A. V. & Kuester, J. L. (eds.). Elsevier, p. 203-214

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A comparison of three black-box optimization approaches to model-based testing

Kanstrén, T. & Chechik, M., 2014, Proceedings of the 2014 Federated Conference on Computer Science and Information Systems. IEEE Institute of Electrical and Electronic Engineers, Vol. 2. p. 1591-1598

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
1 Citation (Scopus)

A comparison of three methods for the loss characterisation of microstrip lines printed on heraeus ct2000 ltcc from 20 to 40 GHz

Bray, J., Roy, L. & Kautio, K., 2017, 9th International Symposium on Antenna Technology and Applied Electromagnetics 2002: ANTEM 2002. IEEE Institute of Electrical and Electronic Engineers, 4 p. 7864595

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A comparison of tribological properties of evenly distributed and agglomerated diamond nanoparticles in lubricated high-load steel-steel contact

Elomaa, O., Oksanen, J., Hakala, T. J., Shenderova, O. & Koskinen, J., 2014, In : Tribology International. 71, p. 62-68

Research output: Contribution to journalArticleScientificpeer-review

13 Citations (Scopus)

A comparison of using wood pellets and fast pyrolysis liquid industrially for heat production within Stockholm

Östman, A., Lindman, E., Solantausta, Y. & Beckman, D., 2001, Progress in Thermochemical Biomass Conversion. Bridgwater, A. V. (ed.). Oxford: Blackwell Science, Vol. 1. p. 867-874

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2 Citations (Scopus)

A comparison of widespread flexible residential electric heating and energy efficiency in a future nordic power system

Rasku, T. & Kiviluoma, J., Jan 2019, In : Energies. 12, 1, 27 p., 62.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
5 Citations (Scopus)

A comparison of wind integration experiences in some high penetration areas

Söder, L., Hofmann, L., Nielsen, C. S. & Holttinen, H., 2006, Proceedings the 3rd Nordic Wind Power Conference – NWPC’2006: Grid Integration and Electrical Systems of Wind Turbines and Wind Farms.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

A comparison performance analysis of QoS WLANs: Approaches with enhanced features

Papapanagiotou, I., Paschos, G. & Devetsikiotis, M., 2007, In : Advances in Multimedia. 2007, 23817.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
2 Citations (Scopus)
Open Access
3 Citations (Scopus)

A complete interior design solution with diminished reality

Siltanen, S., Saraspää, H. & Karvonen, J., 2014, Proceedings IEEE International Symposium on Mixed and Augmented Reality (ISMAR). IEEE Institute of Electrical and Electronic Engineers, p. 371-372

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1 Citation (Scopus)

A complete three-dimensional continuum model of wing-crack growth in granular brittle solids

Kolari, K., 2017, In : International Journal of Solids and Structures. 115-116, p. 27-42 16 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
14 Citations (Scopus)

A compliance element for error compensation in a water tap assembly cell

Voho, P. & Kauhaniemi, I., 1989, p. 8.

Research output: Contribution to conferenceConference articleScientific

A component framework of a distributed control systems family: Dissertation

Niemelä, E., 1999, Espoo: VTT Technical Research Centre of Finland. 192 p.

Research output: ThesisDissertationCollection of Articles

Open Access
5 Citations (Scopus)

A component model for adaptive middleware services and applications

Pakkala, D., Perälä, J. & Niemelä, E., 2007, Proceedings of the 33rd EUROMICRO Conference on Software Engineering and Advanced Applications, EUROMICRO 2007. IEEE Institute of Electrical and Electronic Engineers, p. 21-30

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

4 Citations (Scopus)

A compositional technique for adapting mobile applications

Palviainen, M., 2005, Proceedings of the IADIS International Conference WWW/Internet 2005. Iadis press, Vol. 2. p. 70-75

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access

A comprehensive evaluation of the environmental external costs of a fusion power plant

Hamacher, T., Saez, R., Aquilonius, K., Cabal, H., Hallberg, B., Korhonen, R., Lechon, Y., Lepicard, S., Schleisner, T., Schneider, L. & Ward, D., 2001, In : Fusion Engineering and Design. 56-57, p. 95-103

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

A comprehensive panel of three-dimensional models for studies of prostate cancer growth, invasion and drug responses

Härmä, V., Virtanen, J., Mäkelä, R., Happonen, A., Mpindi, J., Knuuttila, M., Kohonen, P., Lötjönen, J., Kallioniemi, O. & Nees, M., 2010, In : PLoS ONE. 5, 5, 17 p., e10431.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
227 Citations (Scopus)

A comprehensive research approach to investigate the patterns of use of invehicle technologies

Brusque, C., Bonnard, A., Pereira, M., Simões, A., Britschgi, V., Rämä, P., van Nes, N., Christoph, M., Kaufmann, C. & Risser, R., 2010, Proceedings of European Conference on Human Centred Design for Intelligent Transport Systems. p. 415-426

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access

A comprehensive study of carrier velocity modulation in DGSOI transistors

Sampedro, C., Gamiz, F., Godoy, A., Prunnila, M. & Ahopelto, J., 2005, Proceedings of 1st EUROSOI Workshop. University of Granada, Spain, 19 - 21 Jan. 2005. p. 77-78

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

A comprehensive study of carrier velocity modulation in DGSOI transistors

Sampedro, C., Gamiz, F., Godoy, A., Ahopelto, J. & Prunnila, M., 2005, In : Solid-State Electronics. 49, 9, p. 1504 - 1509 6 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

A computational approach for studying antibody-antigen interactions without prior structural information: The anti-testosterone binding antibody as a case study

Koivuniemi, A., Takkinen, K. & Nevanen, T., 2017, In : Proteins. 85, 2, p. 322-331 10 p.

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)

A computational approach for the hygro-thermal modelling of wood under surface densification

Genoese, A., Genoese, A., Fortino, S. & Rautkari, L., 2012, Proceedings of the Sixth European Conference on Wood Modification ECWM6 2012 . Jones, D., Militz, H., Petrič, M., Pohleven, F., Humar, M. & Pavlič, M. (eds.). University of Ljubljana, 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A computational approach for the stress analysis of dowel-type connections under natural humidity conditions

Fortino, S. & Toratti, T., 2009, Proceedings of the International Symposium on Computational Structural Engineering, CSE '09. Springer, p. 597-603

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A computational framework for stress calculation in wood products under humidity and temperature variations

Fortino, S. & Toratti, T., 2011, COST Action FP0802 Workshop, "Hierarchical structure and mechanical characterization of wood", Helsinki, Finland, 24-25 August 2011. Helsinki: Metsäntutkimuslaitos, p. 77-78

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Open Access

A computationally light classification method for mobile wellness platforms

Könönen, V., Jani, M., Similä, H., Pärkkä, J. & Ermes, M., 2008, Proceedings of the 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS'08 - "Personalized Healthcare through Technology". Vancouver, BC, Canada, 20 - 25 Aug. 2008. IEEE Institute of Electrical and Electronic Engineers, p. 1167-1170

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A computational method for crack growth in glulam under variable humidity

Mendicino, A. L., Fortino, S., Henning, M. & Dill-Langer, G., 2010, WCTE 2010, World Conference on Timber Engineering: Conference Proceedings. Trento, Italy, 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

A computational perspective of hydrophobins through molecular dynamics simulations

Patra, M., Munck, N., Paananen, A., Tappura, K., Karttunen, M. & Vattulainen, I., 2004, Proceedings of the XXXVIII Annual Conference of The Finnish Physical Society. Oulu, Finland, 18 - 20 March 2004. University of Oulu. Report Series in Physical Sciences : 25. University of Oulu, p. 269 1 p. (Report Series in Physical Sciences; No. 25).

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Open Access

A computational study on magnesium complexation with formate and hydrogen malonate anions

Yliniemelä, A., Uchimaru, T., Hirose, T., Baldwin, B. & Tanabe, K., 1996, In : Journal of Molecular Structure. 369, 1-3, p. 9-22

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

A computer aided fabric design procedure in colors for dobby weaves

Malmström, B., 1985, Espoo: VTT Technical Research Centre of Finland. 108 p. (Valtion teknillinen tutkimuskeskus. Tiedotteita; No. 469).

Research output: Book/ReportReport

A computer aided fabric design procedure in colors for dobby weaves: Collection of designs

Malmström, B., 1985, Espoo: VTT Technical Research Centre of Finland. 18 p. (Valtion teknillinen tutkimuskeskus. Tiedotteita; No. 470).

Research output: Book/ReportReport

A computer-aided quality control method for the modification of AlSi12 melts

Rauta, V., 1989, Espoo: VTT Technical Research Centre of Finland. 29 p. (Valtion teknillinen tutkimuskeskus. Tutkimuksia - Research Reports; No. 603).

Research output: Book/ReportReport

A computer-assisted VO creation framework

Camarinha-Matos, L. M., Oliveira, A. I., Ratti, R., Demsar, D., Baldo, F. & Jarimo, T., 2007, Establishing the Foundation for Collaborative Networks: Proceedings of the FIP TC 5 Working Group 5.5 Eighth IFIP Working Conference on Virtual Enterprises, PRO-VE 2007. Camarinha-Matos, L. M. (ed.). Boston: Springer, p. 165-178

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

15 Citations (Scopus)

A computer controlled Josephson voltage standard

Seppä, H., Immonen, P. & Räihä, J., 1986, CPEM 86: 1986 Conference on precision electromagnet measurements. p. 110-111

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

A computer-controlled Josephson voltage standard

Seppä, H., Immonen, P. & Räihä, J., 1988, In : IEEE Transactions on Instrumentation and Measurement. 37, 1, p. 2-9

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

A computer controlled particle sampling system with an adjustable and constant dilution ratio and low sample losses

Lyyränen, J., Kärkelä, T., Auvinen, A., Kåll, L., Järvinen, R. & Jokiniemi, J., 2008.

Research output: Contribution to conferenceConference articleScientific

A computer-interactive system for elastic-plastic fracture toughness testing

Saario, T., Wallin, K., Saarelma, H., Valkonen, A. & Törrönen, K., 1985, Automated Test Methods for Fracture and Fatigue Crack Growth. Cullen, W. H., Landgraf, R. W. & Underwood, J. H. (eds.). Philadelphia: American Society for Testing and Materials ASTM, p. 260-268 (ASTM Special Technical Publication, Vol. 877).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

2 Citations (Scopus)

A computerized analysis system for vigilance studies

Värri, A., Hirvonen, K., Hasan, J., Loula, P. & Häkkinen, V., 1992, In : Computer Methods and Programs in Biomedicine. 39, 1-2, p. 113-124 12 p.

Research output: Contribution to journalArticleScientificpeer-review

27 Citations (Scopus)

A computer program for activation analysis

Rantanen, J. & Rosenberg, R., 1983, In : Journal of Radioanalytical Chemistry. 79, 1, p. 129 - 133 5 p.

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)

A computer program for generating and managing schedules for construction projects

Kähkönen, K. & Laurikka, P., 1990, Proceedings of the 7th International Symposium on Automation and Robotics in Construction. Bristol, p. 311-318

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
1 Citation (Scopus)

A computing systems for LBB considerations

Ikonen, K., Miettinen, J., Raiko, H. & Keskinen, R., 1997, Proceedings of the seminar on leak before break in reactor piping and vessels. Faidy, C. & Gilles, P. (eds.). Battelle: U.S. Nuclear Regulatory Commission, p. 635-645 (NUREG/CP; No. 0155).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A concept ensuring high indoor environment quality and structure moisture performance in energy efficiency renovations

Järnström, H., Holopainen, R., Tuomaala, P., Viitanen, H., Airaksinen, M., Puolakka, M., Halonen, L., Vinha, J. & Lähdesmäki, K., 2010, SB10 Finland: Sustainable Community - building SMART. Conference Proceedings.. Huovila, P., Karvonen, A. & Raasakka, V. (eds.). Suomen Rakennusinsinöörien Liitto RIL, p. 66-67

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

A concept for friction mechanisms of coated surfaces

Holmberg, K., 1992, In : Surface and Coatings Technology. 56, 1, p. 1-10 10 p.

Research output: Contribution to journalArticleScientificpeer-review

62 Citations (Scopus)

A Concept for ICT Assisted Health Promotion in the Occupational Healthcare

Mattila, E. M., Koskelo, J., Lappalainen, R., Salminen, J., Nyman, P., Lähteenmäki, J., Leino, T. & Korhonen, I., 2007, 2007 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Institute of Electrical and Electronic Engineers, p. 1786-1789 (Annual International Conference of the IEEE Engineering in Medicine and Biology).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

10 Citations (Scopus)

A concept for improving the security and efficiency of multimodal supply chains

Scholliers, J., Toivonen, S., Permala, A. & Lahtinen, T., 2012, In : International Journal of Applied Logistics (IJAL). 3, 2, p. 1-13 13 p.

Research output: Contribution to journalArticleScientificpeer-review

A concept for isles of automation: Ubiquitous robot cell for flexible manufacturing

Sallinen, M., Heikkilä, T., Salmi, T., Kivikunnas, S. & Pulkkinen, T., 2008, International Conference on Control, Automation and Systems, ICCAS 2008. IEEE Institute of Electrical and Electronic Engineers, p. 2246-2250

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2 Citations (Scopus)