Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters

Absence of substrate roughness effects on an all-printed organic transistor operating at one volt

Kaihovirta, N., Tobjörk, D., Mäkelä, T. & Österbacka, R., 2008, In : Applied Physics Letters. 93, 5, 053302.

Research output: Contribution to journalArticleScientificpeer-review

22 Citations (Scopus)

Absence of traditional magnetoresistivity mechanisms in Sr2FeMoO6 thin films grown on SrTiO3, MgO and NdGaO3 substrates

Saloaro, M., Majumdar, S., Huhtinen, H. & Paturi, P., 2012, In : Journal of Physics: Condensed Matter. 24, 366003.

Research output: Contribution to journalArticleScientificpeer-review

18 Citations (Scopus)

Absolute frequency measurement of an iodine-stabilized 543-nm He-Ne laser with modulation-synchronized phase-locked loop for improved frequency counting

Merimaa, M., Ahtee, V. & Nyholm, K., 23 Sep 2008, 2008 Conference on Precision Electromagnetic Measurements Digest, CPEM 2008. p. 312-313 2 p. 4574778

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1 Citation (Scopus)

Absolute frequency measurement of the R(12) 26-0 and R(106) 28-0 transitions in /sup 127/I/sub 2/ at /spl lambda/=543 nm

Ma, L. S., Picard, S., Zucco, M., Chartier, J-M., Robertsson, L., Balling, P., Krin, P., Qian, J., Liu, Z., Shi, C., Alonso, M. V., Xu, G., Tan, S. L., Nyholm, K., Henningsen, J. & Hald, J., 2006, In : IEEE Transactions on Instrumentation and Measurement. 55, 3, p. 876-880 5 p.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Absorbing radical ideas from unusual sources: the role of social integration mechanisms

Pihlajamaa, M., 2018, In : Technology Analysis and Strategic Management. 30, 2, p. 131-143 13 p.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Absorboivien materiaalien ja reikälevyjen skaalaus kanavaäänenvaimentimien pienoismalleihin

Uosukainen, S., Isomoisio, H., Tanttari, J. & Nousiainen, E., 2011, Akustiikkapäivät 2011. Espoo: Akustinen Seura ry, p. 133-138 (Akustiikkapäivät).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Open Access

Absorptiolämpöpumppu öljylämmitysjärjestelmissä

Aho, I. & Laitinen, A., 1989, Espoo: VTT Technical Research Centre of Finland. 88 p. (Valtion teknillinen tutkimuskeskus. Tiedotteita; No. 1063).

Research output: Book/ReportReport

Absorptiolämpöpumppu rakennusten lämmitys- ja jäähdytysjärjestelmissä

Aho, I., 1990, Espoo: VTT Technical Research Centre of Finland. (LVIS 2000 tutkimusohjelma; No. 9).

Research output: Book/ReportReport

Absorptiolämpöpumpulla ja varastolla varustetun kalliotilan lämmitys- ja jäähdytysjärjestelmä

Translated title of the contribution: Heating and cooling system with absorption heat pump and energy storage in rock cavernsSipilä, K., Ritola, J., Vuopio, J., Leino, O. & Hiltunen, M., 1999, Espoo: VTT Technical Research Centre of Finland. 73 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 1992).

Research output: Book/ReportReport

Absorption and adsorption of dye-based inkjet inks by coating layer components and the implications for print quality

Lamminmäki, T., Kettle, J. & Gane, P. A. C., 2011, In : Colloids and Surfaces A: Physicochemical and Engineering Aspects. 380, 1-3, p. 79-88 10 p.

Research output: Contribution to journalArticleScientificpeer-review

26 Citations (Scopus)

Absorption capability and inkjet ink colorant penetration into binders commonly used in pigmented paper coatings

Lamminmäki, T., Kettle, J., Puukko, P. & Gane, P., 2011, In : Industrial & Engineering Chemistry Research. 50, 6, p. 3287-3294 8 p.

Research output: Contribution to journalArticleScientificpeer-review

10 Citations (Scopus)

Absorption phenomena in laser materials processing

Kujanpää, V., 2005, 10th NOLAMP Conference. Kaplan, A. (ed.). Luleå University of Technology

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Absorption phenomena in laser welding

Kujanpää, V. & Salminen, A., 2003. 15 p.

Research output: Contribution to conferenceConference articleScientificpeer-review

Absorption phenomena in laser welding

Kujanpää, V., 2004, Proceedings of the Finnish-German-Japanese Joint International Seminar on Mechanical and Metallurgical Approaches to New Joining Process. Toyoda, M. & Nishimoto, K. (eds.). p. 125-133

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Absorption phenomena in laser welding of metals and alloys: A literature review

Ahmad, A. & Kujanpää, V., 2007, Proceedings of the 7th DAE-BRNS National Laser Symposium, NLS-07. p. 543-550

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Absorption studies of coldset ink components into paper

Varjos, P., Kataja, K., Qvintus-Leino, P. & Lipponen, M., 2002, Printing with ink-toner on paper in an electronic communication media society: IPAGAC - 11th International Printing and Graphic Arts Conference. 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A built-in force actuator for active control of lateral rotor vibration in cage induction electrical machines

Laiho, A., Tammi, K., Burakov, A., Arkkio, A. & Zenger, K., 2009, In : Journal of Sound and Vibration. 320, 3, p. 496-515 20 p.

Research output: Contribution to journalArticleScientificpeer-review

8 Citations (Scopus)

A business driven strategy for energy efficiency - Marketing products in a competitive power retail market

Johansen, S., Kärkkäinen, S., Forsström, J. & Limaye, D., 1997. 12 p.

Research output: Contribution to conferenceOther conference contributionScientific

AC/DC hybrid distribution system concept

Pasonen, R., 2014, VTT Technical Research Centre of Finland. 36 p. (VTT Research Report, Vol. VTT-R-06033-14).

Research output: Book/ReportReport

Open Access

Academy of medical and biological engineering

Saranummi, N., 1994, In : MBEC News. 9, p. N1-N2

Research output: Contribution to journalArticleProfessional

A cake-washing model with an overall cation transfer in kraft pulp washing

Tervola, P. & Räsänen, E., 2005, In : Chemical Engineering Science. 60, 24, p. 6899-6908

Research output: Contribution to journalArticleScientificpeer-review

8 Citations (Scopus)

A calculable impulse voltage calibrator

Hällström, J., 1 Jan 2002, Helsinki University of Technology. 107 p.

Research output: ThesisDissertation

A calibration system for ptu devices

Semenoja, S. & Heinonen, M., 2007, 3rd IMEKO TC16 International Conference on Pressure Measurement 2007. p. 99-107 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A calibration system for PTU devices

Saxholm, S. & Heinonen, M., 2010, In : Measurement. 43, 10, p. 1583-1588 6 p.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

A CAN node prototype for fluid power applications

Peussa, P. & Kulmala, V., 1993, The Third Scandinavian International Conference on Fluid Power: Modelling and simulation, distributed control systems, control systems I and II, hydrostatic transmissions I and II, mobile hydraulics and robotics, fluid power systems, fluid power components. Palmberg, J-O. (ed.). Linköping: Linköpings universitet, Vol. 2. p. 91-103

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

ACAP-laajennus lisää kustantajien kontrollia verkkosisällöistään

Antikainen, H., 2007, In : GT-lehti. 8, 16.

Research output: Contribution to journalArticleProfessional

ACAP-suositus kehitteillä; Kustantajat tavoittelevat parempaa online-sisältöjensä kontrollia

Antikainen, H., 2007, In : GT-lehti. 5, p. 8-9

Research output: Contribution to journalArticleProfessional

A Carbon footprint of an office building

Airaksinen, M. & Matilainen, P., 2011, In : Energies. 4, 8, p. 1197-1210 14 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
30 Citations (Scopus)

A case for 3D printed metal component in injection molding tool, IIW-Document I-1293-16

Kujanpää, V., 2016.

Research output: Contribution to conferenceConference articleScientific

A case of cast nodes to avoid fatigue problems in offshore platforms

Liimatainen, J., Solin, J. & Kuitunen, R., 1993, Fatigue under spectrum loading and in corrosive environments. Blom, A. F. (ed.). Warley, p. 271-284

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A case of cast nodes to avoid fatigue problems in offshore platforms

Liimatainen, J., Solin, J. & Kuitunen, R., 1994, Engineering Integrity Assessment: Papers presented at the Dynamic Testing Agency's International Conference on Engineering Integrity Assessment. Edwards, J. H., Kerr, J. & Stanley, P. (eds.). Warley, p. 461-473

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A case study demonstrating the utility of inter-program comparative testing for diagnosing errors in building simulation programs

Beausoleil-Morrison, I., Griffith, B., Vesanen, T., Lerson, S. & Weber, A., 2006, Proceedings of eSim 2006: IBPSA-Canada's 4th Biennal Building Performance Simulation Conference. 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access

A case study of a precision fertilizer application task generation for wheat based on classified hyperspectral data from UAV combined with farm history data

Kaivosoja, J., Pesonen, L., Kleemola, J., Pölönen, I., Salo, H., Honkavaara, E., Saari, H., Mäkynen, J. & Rajala, A., 2013, Remote Sensing for Agriculture, Ecosystems, and Hydrology XV. International Society for Optics and Photonics SPIE, 88870H. (Proceedings of SPIE, Vol. 8887).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

18 Citations (Scopus)

A case study of customer communication in globally distributed software product development

Korkala, M., Pikkarainen, M. & Conboy, K., 2010, PROFES '10 Proceedings of the 11th International Conference on Product Focused Software . Association for Computing Machinery ACM, p. 43-46

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

4 Citations (Scopus)

A case study of marketing effects on global distribution logistics development

Hemilä, J. & Pötry, J., 2006, Proceedings of the Society of Operations Management VIII Annual International Conference. New Delhi, 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access

A case study of multiple-site fatigue crack growth in the F-18 hornet bulkhead

Andersson, B., Blom, A. F., Falk, U., Wang, G. S., Koski, K., Siljander, A., Linna, J., Miettinen, A., Vaaraniemi, K. & Lahtinen, R., 2009, Proceedings of the 25th Symposium of the International Committee on Aeronautical Fatigue. Springer, p. 707-741

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A case study of performance of load-bearing wooden structures in natural fire

Hietaniemi, J. & Korhonen, T., 2004. 9 p.

Research output: Contribution to conferenceConference articleScientific

A case study of performance of load-bearing wooden structures in natural fire

Hietaniemi, J. & Korhonen, T., 2004, Proceedings of the 8th World Conference on Timber Engineering, WCTE 2004. Suomen Rakennusinsinöörien Liitto RIL, Vol. 2. p. 329-334

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A case study on corrosion of stainless steel in firewater mains

Carpén, L. & Ohligschläger, T., 2008, 6th European stainless steel conference: Science and market. Jernkontoret, p. 129-136

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access

A case study on naked objects in agile software development

Keränen, H. & Abrahamsson, P., 2005, Extreme Programming and Agile Processes in Software Engineering. Springer, p. 189-197 (Lecture Notes in Computer Science, Vol. 3556).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1 Citation (Scopus)

A case study on understanding 2nd screen usage during a live broadcast. A qualitative multi-method approach

Ainasoja, M., Linna, J., Heikkilä, P., Lammi, H. & Oksman, V., 2014, UBICOMM 2014, The Eighth International Conference on Mobile Ubiquitous Computing, Systems, Services and Technologies. International Academy, Research, and Industry Association IARIA, p. 196 - 203

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
5 Citations (Scopus)

A catalytic NO reduction in periodic lean and rich excursions over Rh supported on oxygen storage capacity materials

Nakatsuji, T., Ruotoistenmäki, J., Komppa, V., Tanaka, Y. & Uekusa, T., 2002, In : Applied Catalysis B: Environmental. 38, 2, p. 101-116

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)

A catalytic NOx reduction system using periodic steps, lean and rich operations

Nakatsuji, T. & Komppa, V., 2002, In : Catalysis Today. 75, 1-4, p. 407-412

Research output: Contribution to journalArticleScientificpeer-review

14 Citations (Scopus)

A catalytic NOx reduction system using periodic two steps: An operation in oxidizing conditions and a relatively short operation in reducing conditions

Nakatsuji, T. & Komppa, V., 2001, In : Applied Catalysis B: Environmental. 30, 1-2, p. 209-223

Research output: Contribution to journalArticleScientificpeer-review

21 Citations (Scopus)

AC biased TES-based X-ray microcalorimeter with an energy resolution of 6.3 eV at 5.89 keV

van der Kuur, J., de Korte, P. A. J., Hoevers, H. F. C., Tiest, W. M. B., Baars, N. H. R., Ridder, M. L., Krouwer, E., Bruijn, M. P., Kiviranta, M. & Seppä, H., 2003, In : IEEE Transactions on Applied Superconductivity. 13, 2, p. 638-642 5 p.

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

AC Breakdown strength of polypropylene-calcium carbonate compounds

Takala, M., Kortet, S., Salovaara, P., Karttunen, M. & Kannus, M., 2007, Proceedings of the 20th Nordic Insulation Symposium, NORD-IS 07. Tapir akademisk forlag, p. 123-126

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A CCD-based real-time spectrum analyzer for incoherent scatter radar systems

Äijänen, T., 1985, In : IEEE Transactions on Instrumentation and Measurement. 34, 1, p. 75 - 78 4 p.

Research output: Contribution to journalArticleScientificpeer-review

Accelerated ageing of organic LED panels using ultraviolet exposure

Askola, J., Calkin, Y., Vaskuri, A., Poikonen, T. & Ikonen, E., 1 Dec 2019, In : Lighting Research and Technology. 51, 8, p. 1263-1274 12 p.

Research output: Contribution to journalArticleScientificpeer-review