Find Research outputs

Search results

• A Broadband Millimeter-Wave Vivaldi Antenna on LTCC

  Gagnon, N., Petosa, A., Panther, A. & Kautio, K., 2006, Proceedings of the 12th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2006. IEEE Institute of Electrical and Electronic Engineers, p. 341-344

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• A broadband millimetre-wave vivaldi antenna on LTCC

  Gagnon, N., Petosa, A., Panther, A. & Kautio, K., 28 Feb 2017, ANTEM 2006 12th International Symposium on Antenna Technology and Applied Electromagnetics and Canadian Radio Sciences Conference. IEEE Institute of Electrical and Electronic Engineers

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Absence of substrate roughness effects on an all-printed organic transistor operating at one volt

  Kaihovirta, N., Tobjörk, D., Mäkelä, T. & Österbacka, R., 2008, In: Applied Physics Letters. 93, 5, 053302.

  Research output: Contribution to journal › Article › Scientific › peer-review
  22 Citations (Scopus)

• Absence of traditional magnetoresistivity mechanisms in Sr2FeMoO6 thin films grown on SrTiO3, MgO and NdGaO3 substrates

  Saloaro, M., Majumdar, S., Huhtinen, H. & Paturi, P., 2012, In: Journal of Physics: Condensed Matter. 24, 366003.

  Research output: Contribution to journal › Article › Scientific › peer-review
  23 Citations (Scopus)

• Absolute frequency measurement of an iodine-stabilized 543-nm He-Ne laser with modulation-synchronized phase-locked loop for improved frequency counting

  Merimaa, M., Ahtee, V. & Nyholm, K., 23 Sep 2008, 2008 Conference on Precision Electromagnetic Measurements Digest, CPEM 2008. p. 312-313 2 p. 4574778

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  1 Citation (Scopus)

• Absolute frequency measurement of the R(12) 26-0 and R(106) 28-0 transitions in /sup 127/I/sub 2/ at /spl lambda/=543 nm

  Ma, L. S., Picard, S., Zucco, M., Chartier, J-M., Robertsson, L., Balling, P., Krin, P., Qian, J., Liu, Z., Shi, C., Alonso, M. V., Xu, G., Tan, S. L., Nyholm, K., Henningsen, J. & Hald, J., 2006, In: IEEE Transactions on Instrumentation and Measurement. 55, 3, p. 876-880 5 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  4 Citations (Scopus)

• Absolute pressure comparison between MIKES and Vaisala Oyj: Range 10 Pa to 5000 Pa

  Rantanen, M., Semenoja, S. & Leskinen, J., 2007, Espoo: Centre of Metrology and Accreditation (MIKES). 16 p. (MIKES Publication; No. J3/2007).

  Research output: Book/Report › Report

  Open Access

• Absorbing radical ideas from unusual sources: the role of social integration mechanisms

  Pihlajamaa, M., 2018, In: Technology Analysis and Strategic Management. 30, 2, p. 131-143 13 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  3 Citations (Scopus)

  18 Downloads (Pure)

• Absorboivien materiaalien ja reikälevyjen skaalaus kanavaäänenvaimentimien pienoismalleihin

  Uosukainen, S., Isomoisio, H., Tanttari, J. & Nousiainen, E., 2011, Akustiikkapäivät 2011. Espoo: Akustinen Seura ry, p. 133-138 (Akustiikkapäivät).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Professional

  Open Access

• Absorptiolämpöpumppu öljylämmitysjärjestelmissä

  Aho, I. & Laitinen, A., 1989, Espoo: VTT Technical Research Centre of Finland. 88 p. (Valtion teknillinen tutkimuskeskus. Tiedotteita; No. 1063).

  Research output: Book/Report › Report

• Absorptiolämpöpumppu rakennusten lämmitys- ja jäähdytysjärjestelmissä

  Aho, I., 1990, Espoo: VTT Technical Research Centre of Finland. (LVIS 2000 tutkimusohjelma; No. 9).

  Research output: Book/Report › Report

• Absorptiolämpöpumpulla ja varastolla varustetun kalliotilan lämmitys- ja jäähdytysjärjestelmä

  Translated title of the contribution: Heating and cooling system with absorption heat pump and energy storage in rock cavernsSipilä, K., Ritola, J., Vuopio, J., Leino, O. & Hiltunen, M., 1999, Espoo: VTT Technical Research Centre of Finland. 73 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 1992).

  Research output: Book/Report › Report

• Absorptiomateriaalit millimetrialueella

  Stén, J. & Hujanen, A., 1997, Helsinki. 29 p. (MATINEn raporttisarja B, Vol. 3).

  Research output: Book/Report › Report

• Absorption and adsorption of dye-based inkjet inks by coating layer components and the implications for print quality

  Lamminmäki, T., Kettle, J. & Gane, P. A. C., 2011, In: Colloids and Surfaces A: Physicochemical and Engineering Aspects. 380, 1-3, p. 79-88 10 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  32 Citations (Scopus)

• Absorption capability and inkjet ink colorant penetration into binders commonly used in pigmented paper coatings

  Lamminmäki, T., Kettle, J., Puukko, P. & Gane, P., 2011, In: Industrial & Engineering Chemistry Research. 50, 6, p. 3287-3294 8 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  11 Citations (Scopus)

• Absorption phenomena in laser materials processing

  Kujanpää, V., 2005, 10th NOLAMP Conference. Kaplan, A. (ed.). Luleå University of Technology

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Absorption phenomena in laser welding

  Kujanpää, V., 2004, Proceedings of the Finnish-German-Japanese Joint International Seminar on Mechanical and Metallurgical Approaches to New Joining Process. Toyoda, M. & Nishimoto, K. (eds.). p. 125-133

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

• Absorption phenomena in laser welding

  Kujanpää, V. & Salminen, A., 2003. 15 p.

  Research output: Contribution to conference › Conference article › Scientific › peer-review

• Absorption phenomena in laser welding of metals and alloys: A literature review

  Ahmad, A. & Kujanpää, V., 2007, Proceedings of the 7th DAE-BRNS National Laser Symposium, NLS-07. p. 543-550

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Absorption studies of coldset ink components into paper

  Varjos, P., Kataja, K., Qvintus-Leino, P. & Lipponen, M., 2002, Printing with ink-toner on paper in an electronic communication media society: IPAGAC - 11th International Printing and Graphic Arts Conference. 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Absorptive capacity: A process and structure approach

  Vasconcelos, A. C., Martins, J. T., Ellis, D. & Fontainha, E., 1 Feb 2019, In: Journal of Information Science. 45, 1, p. 68-83 16 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  12 Citations (Scopus)

• Abstracts of 26th IAPRI Symposium on Packaging 2013

  Vähä-Nissi, M. (ed.), 2013, VTT Technical Research Centre of Finland. 188 p.

  Research output: Book/Report › Book (editor) › Scientific › peer-review

• A built-in force actuator for active control of lateral rotor vibration in cage induction electrical machines

  Laiho, A., Tammi, K., Burakov, A., Arkkio, A. & Zenger, K., 2009, In: Journal of Sound and Vibration. 320, 3, p. 496-515 20 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  9 Citations (Scopus)

• A business driven strategy for energy efficiency - Marketing products in a competitive power retail market

  Johansen, S., Kärkkäinen, S., Forsström, J. & Limaye, D., 1997. 12 p.

  Research output: Contribution to conference › Other conference contribution › Scientific

• A business model in support of agility in the steel industry sector

  Helaakoski, H., Iskanius, P., Peltomaa, I., Kipinä, J. & Page, T., 2007, Technical Papers. Society of Manufacturing Engineers, SME, (Society of Manufacturing Engineers. Technical Paper; No. 81738, Vol. TP07PUB191).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• AC/DC hybrid distribution system concept

  Pasonen, R., 2014, Espoo: VTT Technical Research Centre of Finland. 36 p. (VTT Research Report, Vol. VTT-R-06033-14).

  Research output: Book/Report › Report

  Open Access

• Academic research in change: Ttransformation of Finnish university policies and university research during the 1990s

  Nieminen, M., 16 Apr 2005, University of Tampere. 278 p.

  Research output: Thesis › Dissertation › Monograph

• Academics’ e-learning adoption in higher education institutions: a matter of trust

  Martins, J. T. & Baptista Nunes, M., 11 Jul 2016, In: Learning Organization. 23, 5, p. 299-331 33 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  20 Citations (Scopus)

• Academy of medical and biological engineering

  Saranummi, N., 1994, In: MBEC News. 9, p. N1-N2

  Research output: Contribution to journal › Article › Professional

• A cake-washing model with an overall cation transfer in kraft pulp washing

  Tervola, P. & Räsänen, E., 2005, In: Chemical Engineering Science. 60, 24, p. 6899-6908

  Research output: Contribution to journal › Article › Scientific › peer-review
  8 Citations (Scopus)

• A calculable impulse voltage calibrator

  Hällström, J., 1 Jan 2002, Helsinki University of Technology. 107 p.

  Research output: Thesis › Dissertation › Collection of Articles

• A calibration system for ptu devices

  Semenoja, S. & Heinonen, M., 2007, 3rd IMEKO TC16 International Conference on Pressure Measurement 2007. p. 99-107 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• A calibration system for PTU devices

  Saxholm, S. & Heinonen, M., 2010, In: Measurement. 43, 10, p. 1583-1588 6 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  4 Citations (Scopus)

• AC and DC voltage standards based on silicon micromechanics

  Suhonen, M., Seppä, H., Oja, A., Heinilä, M. & Näkki, I., 1998, 1998 Conference on Precision Electromagnetic Measurements Digest. IEEE Institute of Electrical and Electronic Engineers, p. 23-24

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific
  38 Citations (Scopus)

• A CAN node prototype for fluid power applications

  Peussa, P. & Kulmala, V., 1993, The Third Scandinavian International Conference on Fluid Power: Modelling and simulation, distributed control systems, control systems I and II, hydrostatic transmissions I and II, mobile hydraulics and robotics, fluid power systems, fluid power components. Palmberg, J-O. (ed.). Linköping: Linköpings universitet, Vol. 2. p. 91-103

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• A capacitive ID-sensor with internal PUF

  Karuthedath, C. B., Aung, S. & Schwesinger, N., 1 Mar 2018, In: International Journal of Mechanical Engineering and Robotics Research. 7, 2, p. 202-207 6 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

• ACAP-laajennus lisää kustantajien kontrollia verkkosisällöistään

  Antikainen, H., 2007, In: GT-lehti. 8, 16.

  Research output: Contribution to journal › Article › Professional

• ACAP-suositus kehitteillä; Kustantajat tavoittelevat parempaa online-sisältöjensä kontrollia

  Antikainen, H., 2007, In: GT-lehti. 5, p. 8-9

  Research output: Contribution to journal › Article › Professional

• A Carbon footprint of an office building

  Airaksinen, M. & Matilainen, P., 2011, In: Energies. 4, 8, p. 1197-1210 14 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  39 Citations (Scopus)

• A case for 3D printed metal component in injection molding tool, IIW-Document I-1293-16

  Kujanpää, V., 2016.

  Research output: Contribution to conference › Conference article › Scientific

• A case of cast nodes to avoid fatigue problems in offshore platforms

  Liimatainen, J., Solin, J. & Kuitunen, R., 1993, Fatigue under spectrum loading and in corrosive environments. Blom, A. F. (ed.). Warley: Engineering Materials Advisory Services EMAS, p. 271-284

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• A case of cast nodes to avoid fatigue problems in offshore platforms

  Liimatainen, J., Solin, J. & Kuitunen, R., 1994, Engineering Integrity Assessment: Papers presented at the Dynamic Testing Agency's International Conference on Engineering Integrity Assessment. Edwards, J. H., Kerr, J. & Stanley, P. (eds.). Warley: Engineering Materials Advisory Services EMAS, p. 461-473

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• A Case Study—Applying a Design Thinking Process and User Experience Goals in Developing Solutions for a Smart Construction Site

  Aromaa, S., Lappalainen, I., Kaasinen, E. & Öfversten, J., 2022, Design, User Experience, and Usability: Design Thinking and Practice in Contemporary and Emerging Technologies - 11th International Conference, DUXU 2022, Held as Part of the 24th HCI International Conference, HCII 2022, Proceedings. Soares, M. M., Rosenzweig, E. & Marcus, A. (eds.). Springer, p. 93-105 13 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), Vol. 13323 LNCS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• A case study demonstrating the utility of inter-program comparative testing for diagnosing errors in building simulation programs

  Beausoleil-Morrison, I., Griffith, B., Vesanen, T., Lerson, S. & Weber, A., 2006, Proceedings of eSim 2006: IBPSA-Canada's 4th Biennal Building Performance Simulation Conference. 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  Open Access

• A case study of a precision fertilizer application task generation for wheat based on classified hyperspectral data from UAV combined with farm history data

  Kaivosoja, J., Pesonen, L., Kleemola, J., Pölönen, I., Salo, H., Honkavaara, E., Saari, H., Mäkynen, J. & Rajala, A., 2013, Remote Sensing for Agriculture, Ecosystems, and Hydrology XV. International Society for Optics and Photonics SPIE, 88870H. (Proceedings of SPIE, Vol. 8887).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  26 Citations (Scopus)

• A case study of customer communication in globally distributed software product development

  Korkala, M., Pikkarainen, M. & Conboy, K., 2010, PROFES '10 Proceedings of the 11th International Conference on Product Focused Software . Association for Computing Machinery ACM, p. 43-46

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  4 Citations (Scopus)

• A case study of marketing effects on global distribution logistics development

  Hemilä, J. & Pötry, J., 2006, Proceedings of the Society of Operations Management VIII Annual International Conference. New Delhi: Tata McGraw-Hill Publishing Company Limited, 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  Open Access

• A case study of multiple-site fatigue crack growth in the F-18 hornet bulkhead

  Andersson, B., Blom, A. F., Falk, U., Wang, G. S., Koski, K., Siljander, A., Linna, J., Miettinen, A., Vaaraniemi, K. & Lahtinen, R., 2009, Proceedings of the 25th Symposium of the International Committee on Aeronautical Fatigue. Springer, p. 707-741

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• A case study of performance of load-bearing wooden structures in natural fire

  Hietaniemi, J. & Korhonen, T., 2004. 9 p.

  Research output: Contribution to conference › Conference article › Scientific

• A case study of performance of load-bearing wooden structures in natural fire

  Hietaniemi, J. & Korhonen, T., 2004, Proceedings of the 8th World Conference on Timber Engineering, WCTE 2004. Suomen Rakennusinsinöörien Liitto RIL, Vol. 2. p. 329-334

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review