Find Research Outputs

Search concepts
Selected filters

3D Analysis of Thin Layers by ToF-SIMS

Utriainen, M., Puurunen, R. L., Kia, A. M., Esmaeli, S., Mart, C., Haufe, N. & Weinreich, W., 31 Aug 2018.

Research output: Contribution to conferenceConference AbstractScientificpeer-review

3D ASCOT simulations of 13C transport in ASDEX Upgrade

Kurki-Suonio, T., Miettunen, J., Äkäslompolo, S., Makkonen, T., Groth, M., Hirvijoki, E., Hakola, A., Likonen, J., Krieger, K. & ASDEX Upgrade Team, 2011, 38th EPS Conference on Plasma Physics. p. 45-48

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

3D brittle and lithological models of Olkiluoto

Paananen, M., Paulamäki, S., Engström, J., Aaltonen, I., Mattila, J., Kosunen, P., Gehör, S., Kärki, A. & Front, K., 2016, Bulletin of the Geological Society of Finland: Special Volume. Geological Society of Finland, p. 309

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

3D-Connected Components Analysis for Traffic Monitoring in Image Sequences Acquired from a Helicopter

Molinier, M., Ahola, H. & Häme, T., 2005, Image Analysis: 14th Scandinavian Conference, SCIA 2005, Joensuu, Finland, June 19-22, 2005. Proceedings. Springer, p. 141-150 (Lecture Notes in Computer Science, Vol. 3540).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

13 Citations (Scopus)

3D core thermal hydraulics with the PORFLO code: Turbulence modelling and porous medium with porosity steps

Ilvonen, M., Hovi, V. & Taivassalo, V., 2014, Proceedings of the 22th International Conference on Nuclear Engineering, ICONE22: Volume 4: Radiation Protection and Nuclear Technology Applications; Fuel Cycle, Radioactive Waste Management and Decommissioning; Computational Fluid Dynamics (CFD) and Coupled Codes; Reactor Physics and Transport Theory. American Society of Mechanical Engineers ASME, Vol. 4. 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1 Citation (Scopus)

3D Display directional backlight based on diffractive elements

Mäkinen, J-T. & Ojala, K., 21 Nov 2019, Patent No. WO2019221993 A1, 8 May 2019, Priority date 17 May 2018

Research output: PatentPatent application

3-D double-directional radio channel characterization for urban macrocellular applications

Kalliola, K., Laitinen, H., Vainikainen, P., Toeltsch, M., Laurila, J. & Bonek, E., 2003, In : IEEE Transactions on Antennas and Propagation. 51, 11, p. 3122-3133

Research output: Contribution to journalArticleScientificpeer-review

89 Citations (Scopus)

3D-FBK pixel sensors: Recent beam tests results with irradiated devices

Micelli, A., Helle, K., Sandaker, H., Stugu, B., Barbero, M., Hügging, F., Karagounis, M., Kostyukhin, V., Krüger, H., Tsung, J. W., Wermes, N., Capua, M., Fazio, S., Mastroberardino, A., Susinno, G., Gallrapp, C., Di Girolamo, B., Dobos, D., La Rosa, A., Pernegger, H. & 72 others, Roe, S., Slavicek, T., Pospisil, S., Jakobs, K., Köhler, M., Parzefall, U., Darbo, G., Gariano, G., Gemme, C., Rovani, A., Ruscino, E., Butter, C., Bates, R., Oshea, V., Parker, S., Cavalli-Sforza, M., Grinstein, S., Korokolov, I., Pradilla, C., Einsweiler, K., Garcia-Sciveres, M., Borri, M., Da Vià, C., Freestone, J., Kolya, S., Lai, C. H., Nellist, C., Pater, J., Thompson, R., Watts, S. J., Hoeferkamp, M., Seidel, S., Bolle, E., Gjersdal, H., Sjoebaek, K. N., Stapnes, S., Rohne, O., Su, D., Young, C., Hansson, P., Grenier, P., Hasi, J., Kenney, C., Kocian, M., Jackson, P., Silverstein, D., Davetak, H., Dewilde, B., Tsybychev, D., Dalla Betta, G. F., Gabos, P., Povoli, M., Cobal, M., Giordani, M. P., Selmi, L., Cristofoli, A., Esseni, D., Palestri, P., Fleta, C., Lozano, M., Pellegrini, G., Boscardin, M., Bagolini, A., Piemonte, C., Ronchin, S., Zorzi, N., Hansen, T. E., Hansen, T., Kok, A., Lietaer, N., Kalliopuska, J. & Oja, A., 11 Sep 2011, In : Nuclear Instruments and Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 650, 1, p. 150-157

Research output: Contribution to journalArticleScientificpeer-review

10 Citations (Scopus)

3D features on plastic substrate by combined thermal and UV-imprinting

Haatainen, T., Mäkelä, T. & Jouni, A., 2009.

Research output: Contribution to conferenceConference articleScientificpeer-review

3D features on plastic substrate by combining thermal and UV-nanoimprinting

Haatainen, T., Mäkelä, T. & Ahopelto, J., 2009.

Research output: Contribution to conferenceConference PosterScientificpeer-review

3D flip chip packaging of MEMS sensor

Gädda, A., Tuovinen, R., Rimminen, H., Lalu, S., Saarilahti, J. & Kärkkäinen, A., 1 Jan 2014, Proceedings of the 5th Electronics System-Integration Technology Conference, ESTC 2014. IEEE Institute of Electrical and Electronic Engineers , 6962737

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

3D forming of paperboard: The influence of paperboard properties on formability

Vishtal, A., Hauptmann, M., Zelm, R., Majschak, J-P. & Retulainen, E., 2014, In : Packaging Technology and Science. 27, 9, p. 677-691

Research output: Contribution to journalArticleScientificpeer-review

37 Citations (Scopus)

3-D imaging with scannerless LIDAR

Ailisto, H., Heikkinen, V., Mitikka, R., Myllylä, R., Kostamovaara, J., Mäntyniemi, A., Koskinen, M., Ulbrich, G. & Pereira do Carmo, J., 2001, Proceedings of ODIMAP III: 3nd Topical Meeting on Optoelectronic Distance/Displacement Measurements and Applications. Pavia, IT, 20 - 22 Sept. 2001. Pavia, p. 202-207

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access

3D measurement controlled by a cad model-based measurement planning and vision system

Ailistö, H., Mitikka, R., Moring, I., Jokinen, H. & Kaisto, I., 1 Jan 1996, In : International Journal of Pattern Recognition and Artificial Intelligence. 10, 2, p. 151-164 14 p.

Research output: Contribution to journalArticleScientificpeer-review

3D measurement controlled by a CAD model-based measurement planning and vision system

Ailisto, H., Mitikka, R., Moring, I., Jokinen, H. & Kaisto, I., 1996, Machine vision for advanced production. Pietikäinen, M. & Pau, L-F. (eds.). World Scientific Publishing, p. 151-164 (Series in Machine Perception and Artificial Intelligence, Vol. 22).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

3D micromechanical compass

Kyynäräinen, J., Saarilahti, J., Kattelus, H., Meinander, T., Suhonen, M., Oja, A., Seppä, H., Pekko, P., Kuisma, H., Ruotsalainen, S. & Tilli, M., 1 Mar 2007, In : Sensor Letters. 5, 1, p. 126-129

Research output: Contribution to journalArticleScientificpeer-review

10 Citations (Scopus)

3D micro-nano structured hybrid scaffolds: An investigation into the role of nanofiber coating on viability, proliferation and differentiation of seeded mesenchymal stem cells

Pilehrood, M. K., Atashi, A., Sadeghi-Aliabadi, H., Nousiainen, P. & Harlin, A., 2016, In : Journal of Nanoscience and Nanotechnology. 16, 9, p. 9000-9007

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

3D-muodonhaku: Menetelmiä ja sovelluksia

Translated title of the contribution: 3D Shape Retrieval: Methods and ApplicationsTossavainen, T., Sääski, J., Ruusu, R., Salonen, T. & Granholm, G., 2007, Espoo: VTT Technical Research Centre of Finland. 41 p. (VTT Working Papers; No. 77).

Research output: Book/ReportReport

Open Access

3-D näkö ja kolmiulotteinen muodonmittaus

Ailisto, H., 1989, Helsinki. 6 p.

Research output: Book/ReportReport

3D Nanostructuring of hydrogen silsesquioxane resist by 100 keV electron beam lithography

Vila-Comamala, J., Gorelick, S., Guzenko, V. A. & David, C., 2011, In : Journal of Vacuum Science and Technology B: Nanotechnology and Microelectronics. 29, 6, 5 p., 06F301.

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)

3D-ohutlevykappaleen nopea piensarjavalmistus

Penttilä, R., Savinainen, T. & Varis, J., 2000, In : Ohutlevy. 2, p. 18-19

Research output: Contribution to journalArticleProfessional

3D-ohutlevytuotteiden joustava räätälöity sarjavalmistus ja automatisoidun valmistuksen uudet prosessit

Savinainen, T., Määttä, T. & Kujanpää, V., 2010, SISU 2010 - Uusi tuotantoajattelu: Loppuraportti. Helsinki: TEKES, p. 91-93 (Tekesin ohjelmaraportti; No. 1/2010).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

3D opal photonic crystals grown on patterned silicon platforms

Jonsson, F., Ye, J., Arpiainen, S., Zentel, R., Ahopelto, J. & Sotomayor Torres, C. M., 2005.

Research output: Contribution to conferenceOther conference contributionScientificpeer-review

3D-paikkatietoselaimet tulevat

Parmes, E. & Rainio, K., 2006, In : Positio. 1, p. 17-19

Research output: Contribution to journalArticleProfessional

3D-printable bioactivated nanocellulose-alginate hydrogels

Leppiniemi, J., Lahtinen, P., Paajanen, A., Mahlberg, R., Metsä-Kortelainen, S., Pinomaa, T., Pajari, H., Vikholm-Lundin, I., Pursula, P. & Hytönen, V., 2017, In : ACS Applied Materials & Interfaces. 9, 26, p. 21959-21970 12 p.

Research output: Contribution to journalArticleScientificpeer-review

91 Citations (Scopus)

3D Printing High-Consistency Enzymatic Nanocellulose Obtained from a Soda-Ethanol-O2 Pine Sawdust Pulp

Kangas, H., Felissia, F. E., Filgueira, D., Ehman, N. V., Vallejos, M. E., Imlauer, C. M., Lahtinen, P., Area, M. C. & Chinga-Carrasco, G., 16 Jul 2019, In : Bioengineering. 6, 12 p., 60.

Research output: Contribution to journalArticleScientificpeer-review

Open Access

3D-printing of cellulosic materials: Properties and suitability on cellulosic fabrics

Tenhunen, T-M., Varis, P., Kammiovirta, K., Puolakka, A., Setälä, H., Harlin, A., Kääriäinen, P., Österberg, M., Tammelin, T. & Orelma, H., 2017.

Research output: Contribution to conferenceConference articleScientific

3D Printing of Soft Magnetic Cores For Electrical Machines

Pippuri, J., Metsä-Kortelainen, S., Lindroos, T., Savolainen, M., Jokinen, A., Revuelta, A., Pasanen, A. & Ruusuvuori, K., 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. Aaltonen, J., Virkkunen, R., Koskinen, K. T. & Kuivanen, R. (eds.). Tampere University of Technology, p. 48-51 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access

3D processing on 6 in. high resistive SOI wafers: Fabrication of edgeless strip and pixel detectors

Eränen, S., Kalliopuska, J., Orava, R., van Remortel, N. & Virolainen, T., 2009, In : Nuclear Instruments and Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 607, 1, p. 85-88

Research output: Contribution to journalArticleScientificpeer-review

16 Citations (Scopus)

3D radiation pattern measurement of LTCC antennas at 60 GHz

Lamminen, A., Titz, D., Kyrö, M., Azhar, S. M., Ferrero, F., Luxey, C., Säily, J., Jacquemond, G. & Vainikainen, P., 2011, Millimetre Wave Days Proceedings: Fourth Global Symposium on Millimeter Waves GSMM2011. p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

3D RF integration at VTT

Vähä-Heikkilä, T., 2013, Nanosensors, Biosensors, and Info-Tech Sensors and Systems . Varadan, V. K. (ed.). International Society for Optics and Photonics SPIE, 86910V. (Proceedings of SPIE, Vol. 8691).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

3D-ROCK Mallinnusjärjestelmä kallioperän rakennetutkimuksiin

Translated title of the contribution: SD-ROCK Modelling system for structural investigations of the bedrockVaittinen, T., Torpo, A., Hakala, M., Johansson, E. & Halonen, O., 1992, Espoo: VTT Technical Research Centre of Finland. 112 p. (VTT Julkaisuja - Publikationer, Vol. 763).

Research output: Book/ReportReport

3DS-colorimeter based on a mobile phone camera for industrial applications

Miettinen, J., Martinkauppi, B. & Suopajärvi, P., 2013, Sensors, Cameras, and Systems for Industrial and Scientific Applications XIV. Widenhorn, R. (ed.). International Society for Optics and Photonics SPIE, 86590M. (Proceedings of SPIE, Vol. 8659).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1 Citation (Scopus)

3D simulations of 3D silicon radiation detector structures

Kalliopuska, J., Eränen, S. & Orava, R., 2006, In : Nuclear Instruments and Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 568, 1, p. 27-33

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

3D tulee etäläsnäolosovelluksiin

Valli, S., 2010, In : GT-lehti. 4, p. 30-31

Research output: Contribution to journalArticleProfessional

3D tuli elokuvateatteriin

Laine, J., 2008, In : GT-lehti. 7, 21.

Research output: Contribution to journalArticleProfessional

3D-tulostuksella lisäarvoa tuotteisiin

Kujanpää, V., 2015.

Research output: Contribution to conferenceConference articleProfessional

Open Access

3D-tulostuksen suunnittelu- ja päätöksenteko-opas yrityksille

Sekhurov, S., Eklund, P., Kujanpää, V., Pekkarinen, J., Syrjälä, K. & Vihinen, J., 2017, 42 p. (DIMECC Publications Series; No. 12).

Research output: Book/ReportReport

Open Access

3D-tulostus

Kujanpää, V., 2017.

Research output: Contribution to conferenceConference articleProfessional

3D-tulostus ja lämpökäsittely - prosessiparametrit, muodostuvat mikrorakenteet ja lämpökäsittelyt

Sirén, M., 2017. 29 p.

Research output: Contribution to conferenceOther conference contributionProfessional

Open Access

3D-tulostus mullistaa elintarvikkeiden tuotannon

Metsä-Kortelainen, S., Lille, M., Sözer, N. & Kalpio, T., 2016, In : Promaint. 29, 5, p. 42-44

Research output: Contribution to journalArticleProfessional

3D visualisation as a tool for managing diagnostic and prognostic information of industrial machinery

Rönkkö, J., Rainio, K., Hagberg, V-M., Järvinen, P., Markkanen, J. & Ylikerälä, M., 2006, Prognostics for industrial machinery availability: Final seminar. Espoo: VTT Technical Research Centre of Finland, p. 38-48

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access

3E - Expressing emotions and experiences

Tähti, M. & Niemelä, M., 2006, Proceedings of WP9 Workshop on Innovative Approaches for Evaluating Affective Systems. p. 15-19

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

3G/HSP a performance in live networks from the end user perspective

Prokkola, J., Perälä, P., Hanski, M. & Piri, E., 2009, 2009 IEEE International Conference on Communications. IEEE Institute of Electrical and Electronic Engineers , 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

33 Citations (Scopus)

3GPP nonterrestrial networks: A concise review and look ahead

Anttonen, A., Ruuska, P. & Kiviranta, M., 2019, VTT Technical Research Centre of Finland. 31 p. (VTT Research Report; No. VTT-R-00079-19).

Research output: Book/ReportReport

Open Access
File
1826 Downloads (Pure)

3GSM World Congress 2003: "Korvat+suu+silmät" on tulevaisuuden matkapuhelinviestinnän suunta

Kangas, S., 2003, In : GT-lehti. 1, p. 3-5

Research output: Contribution to journalArticleProfessional

3He dimers in two-dimensional 3He–4He mixture films

Saarela, M., Paaso, J., Krotscheck, E. & Schörkhuber, K., 2000, In : Physica B: Condensed Matter. 284-288, Part 1, p. 331-332 2 p.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

3-omega measurement of thermal conductivities of Thermal Interface Materials in the range 10 - 300 K

Chapuis, P., Schmidt, M., Cuffe, J., Prunnila, M., Ahopelto, J. & Sotomayor Torres, C. M., 2009, Book of Abstracts (CD). Materials Research Society

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

3rd European Federation of Biotechnology Conference: Physiology of Yeasts and Filamentous Fungi PYFF3

Kuokka-Ihalainen, A. (ed.), Saloheimo, M. (ed.) & Pakula, T. (ed.), 2007, Espoo: VTT Technical Research Centre of Finland. 193 p. (VTT Symposium; No. 245).

Research output: Book/ReportBook (editor)

Open Access

3rd Generation revolution or evolution?

Mitts, H., 1995, In : Mobile Communications International. May, p. 35-38

Research output: Contribution to journalArticleProfessional