Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters

About the eSafety implementation roadmap

Kulmala, R., 2011.

Research output: Contribution to conferenceOther conference contributionScientific

About the training content and goals in simulator training at Loviisa

Tuominen, L., Sammatti, P. & Turpeinen, J., 1984, Nuclear power plant training simulators: IAEA/NPPCI Specialists’ Meeting. Espoo: VTT Technical Research Centre of Finland, p. 87-103 (VTT Symposium; No. 41).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Abrasiivinen vesileikkaus vai laserleikkaus?

Nieminen, I., 1997, In : Ohutlevyuutiset. 1, p. 30-32

Research output: Contribution to journalArticleProfessional

Abrasion of concrete by ice

Sistonen, E., Leivo, M. & Puttonen, J., 2008, p. 5-15.

Research output: Contribution to conferenceConference articleScientific

Abrasion of concrete by ice in arctic sea structures: Dissertation

Huovinen, S., 1990, Espoo: VTT Technical Research Centre of Finland. 145 p.

Research output: ThesisDissertationMonograph

Abrasion of concrete by ice in arctic sea structures

Huovinen, S., 1990, In : Rakenteiden Mekaniikka. 23, 1, p. 23-34

Research output: Contribution to journalArticleScientificpeer-review

Abrasion of concrete by ice in arctic sea structures

Huovinen, S., 1989, RILEM 43rd General Council Meeting: Finnish Contributions. Espoo: VTT Technical Research Centre of Finland, p. 39-49 (VTT Symposium; No. 105).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Abrasion of concrete by ice in arctic sea structures

Huovinen, S., 1990, In : ACI Materials Journal. 87, 3, p. 266-270

Research output: Contribution to journalArticleScientificpeer-review

8 Citations (Scopus)

Abrasion of concrete structures by ice

Huovinen, S., 1991, In : Rakenteiden Mekaniikka. 24, 3, p. 56-75

Research output: Contribution to journalArticleProfessional

Abrasion of concrete structures by ice

Huovinen, S., 1993, In : Cement and Concrete Research. 23, 1, p. 69 - 82 14 p.

Research output: Contribution to journalArticleScientificpeer-review

14 Citations (Scopus)

Abrasive Wear Properties of Metal Matrix Composites Produced by Hot Isostatic Pressing

Ala-Kleme, S., Kivikytö-Reponen, P., Liimatainen, J., Hellman, J. & Hannula, S-P., 2006, 15th International Conference Engineering Materials and Tribology, BALTMATTRIB 2006. p. 48-49

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Abrasive wear properties of tool steel matrix composites in rubber wheel abrasion test and laboratory cone crusher experiments

Ala-Kleme, S., Kivikytö-Reponen, P., Liimatainen, J., Hellman, J. & Hannula, S-P., 2007, In : Wear. 263, 1-6, p. 180-187

Research output: Contribution to journalArticleScientificpeer-review

14 Citations (Scopus)

A breakthrough in maritime propulsion

Lievonen, J., 1997, In : Industrial Horizons. December, p. 18-19

Research output: Contribution to journalArticleProfessional

A breakthrough in ultrasonic detection and sizing of partially closed cracks?

Sandlin, S., 2009, Espoo: VTT Technical Research Centre of Finland. 20 p. (VTT Research Report; No. VTT-R-08989-09).

Research output: Book/ReportReport

A breakthrough in ultrasonic detection and sizing of partially closed cracks?

Sandlin, S., 2010, Baltica VIII: Life Management and Maintenance for Power Plants. Espoo: VTT Technical Research Centre of Finland, Vol. 2. p. 270-293 (VTT Symposium; No. 265).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access

A breakthrough in waste treatment

El Mahgary, Y., 1997, In : Industrial Horizons. 1, p. 12-13

Research output: Contribution to journalArticleProfessional

A brief introduction to measuring information security

Savola, R., Sademies, A. & Holappa, J., 2005, IPICS' 2005: The sixth winter school: European Intensive Programme on Information Security Management and Technology. University of Oulu, 6. (University of Oulu. Department of Information Processing Science. Series A, Research papers; No. 38).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A broad approach to the dependability of IP networks

Norros, I., 2006, In : European CIIP Newsletter. 2, 3 Oct/Nov, p. 16-17 2 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access

A Broadband Millimeter-Wave Vivaldi Antenna on LTCC

Gagnon, N., Petosa, A., Panther, A. & Kautio, K., 2006, Proceedings of the 12th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2006. IEEE Institute of Electrical and Electronic Engineers, p. 341-344

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A broadband millimetre-wave vivaldi antenna on LTCC

Gagnon, N., Petosa, A., Panther, A. & Kautio, K., 28 Feb 2017, ANTEM 2006 12th International Symposium on Antenna Technology and Applied Electromagnetics and Canadian Radio Sciences Conference. IEEE Institute of Electrical and Electronic Engineers

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Absence of substrate roughness effects on an all-printed organic transistor operating at one volt

Kaihovirta, N., Tobjörk, D., Mäkelä, T. & Österbacka, R., 2008, In : Applied Physics Letters. 93, 5, 053302.

Research output: Contribution to journalArticleScientificpeer-review

22 Citations (Scopus)

Absence of traditional magnetoresistivity mechanisms in Sr2FeMoO6 thin films grown on SrTiO3, MgO and NdGaO3 substrates

Saloaro, M., Majumdar, S., Huhtinen, H. & Paturi, P., 2012, In : Journal of Physics: Condensed Matter. 24, 366003.

Research output: Contribution to journalArticleScientificpeer-review

18 Citations (Scopus)

Absolute frequency measurement of an iodine-stabilized 543-nm He-Ne laser with modulation-synchronized phase-locked loop for improved frequency counting

Merimaa, M., Ahtee, V. & Nyholm, K., 23 Sep 2008, 2008 Conference on Precision Electromagnetic Measurements Digest, CPEM 2008. p. 312-313 2 p. 4574778

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1 Citation (Scopus)

Absolute frequency measurement of the R(12) 26-0 and R(106) 28-0 transitions in /sup 127/I/sub 2/ at /spl lambda/=543 nm

Ma, L. S., Picard, S., Zucco, M., Chartier, J-M., Robertsson, L., Balling, P., Krin, P., Qian, J., Liu, Z., Shi, C., Alonso, M. V., Xu, G., Tan, S. L., Nyholm, K., Henningsen, J. & Hald, J., 2006, In : IEEE Transactions on Instrumentation and Measurement. 55, 3, p. 876-880 5 p.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Absorbing radical ideas from unusual sources: the role of social integration mechanisms

Pihlajamaa, M., 2018, In : Technology Analysis and Strategic Management. 30, 2, p. 131-143 13 p.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Absorboivien materiaalien ja reikälevyjen skaalaus kanavaäänenvaimentimien pienoismalleihin

Uosukainen, S., Isomoisio, H., Tanttari, J. & Nousiainen, E., 2011, Akustiikkapäivät 2011. Espoo: Akustinen Seura ry, p. 133-138 (Akustiikkapäivät).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Open Access

Absorptiolämpöpumppu öljylämmitysjärjestelmissä

Aho, I. & Laitinen, A., 1989, Espoo: VTT Technical Research Centre of Finland. 88 p. (Valtion teknillinen tutkimuskeskus. Tiedotteita; No. 1063).

Research output: Book/ReportReport

Absorptiolämpöpumppu rakennusten lämmitys- ja jäähdytysjärjestelmissä

Aho, I., 1990, Espoo: VTT Technical Research Centre of Finland. (LVIS 2000 tutkimusohjelma; No. 9).

Research output: Book/ReportReport

Absorptiolämpöpumpulla ja varastolla varustetun kalliotilan lämmitys- ja jäähdytysjärjestelmä

Translated title of the contribution: Heating and cooling system with absorption heat pump and energy storage in rock cavernsSipilä, K., Ritola, J., Vuopio, J., Leino, O. & Hiltunen, M., 1999, Espoo: VTT Technical Research Centre of Finland. 73 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 1992).

Research output: Book/ReportReport

Absorption and adsorption of dye-based inkjet inks by coating layer components and the implications for print quality

Lamminmäki, T., Kettle, J. & Gane, P. A. C., 2011, In : Colloids and Surfaces A: Physicochemical and Engineering Aspects. 380, 1-3, p. 79-88 10 p.

Research output: Contribution to journalArticleScientificpeer-review

25 Citations (Scopus)

Absorption capability and inkjet ink colorant penetration into binders commonly used in pigmented paper coatings

Lamminmäki, T., Kettle, J., Puukko, P. & Gane, P., 2011, In : Industrial & Engineering Chemistry Research. 50, 6, p. 3287-3294 8 p.

Research output: Contribution to journalArticleScientificpeer-review

10 Citations (Scopus)

Absorption phenomena in laser materials processing

Kujanpää, V., 2005, 10th NOLAMP Conference. Kaplan, A. (ed.). Luleå University of Technology

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Absorption phenomena in laser welding

Kujanpää, V. & Salminen, A., 2003. 15 p.

Research output: Contribution to conferenceConference articleScientificpeer-review

Absorption phenomena in laser welding

Kujanpää, V., 2004, Proceedings of the Finnish-German-Japanese Joint International Seminar on Mechanical and Metallurgical Approaches to New Joining Process. Toyoda, M. & Nishimoto, K. (eds.). p. 125-133

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Absorption phenomena in laser welding of metals and alloys: A literature review

Ahmad, A. & Kujanpää, V., 2007, Proceedings of the 7th DAE-BRNS National Laser Symposium, NLS-07. p. 543-550

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A built-in force actuator for active control of lateral rotor vibration in cage induction electrical machines

Laiho, A., Tammi, K., Burakov, A., Arkkio, A. & Zenger, K., 2009, In : Journal of Sound and Vibration. 320, 3, p. 496-515 20 p.

Research output: Contribution to journalArticleScientificpeer-review

8 Citations (Scopus)

A business driven strategy for energy efficiency - Marketing products in a competitive power retail market

Johansen, S., Kärkkäinen, S., Forsström, J. & Limaye, D., 1997. 12 p.

Research output: Contribution to conferenceOther conference contributionScientific

AC/DC hybrid distribution system concept

Pasonen, R., 2014, VTT Technical Research Centre of Finland. 36 p. (VTT Research Report, Vol. VTT-R-06033-14).

Research output: Book/ReportReport

Open Access

Academy of medical and biological engineering

Saranummi, N., 1994, In : MBEC News. 9, p. N1-N2

Research output: Contribution to journalArticleProfessional

A cake-washing model with an overall cation transfer in kraft pulp washing

Tervola, P. & Räsänen, E., 2005, In : Chemical Engineering Science. 60, 24, p. 6899-6908

Research output: Contribution to journalArticleScientificpeer-review

8 Citations (Scopus)

A calculable impulse voltage calibrator

Hällström, J., 1 Jan 2002, Helsinki University of Technology. 107 p.

Research output: ThesisDissertationCollection of Articles

A calibration system for ptu devices

Semenoja, S. & Heinonen, M., 2007, 3rd IMEKO TC16 International Conference on Pressure Measurement 2007. p. 99-107 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

A calibration system for PTU devices

Saxholm, S. & Heinonen, M., 2010, In : Measurement. 43, 10, p. 1583-1588 6 p.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

ACAP-laajennus lisää kustantajien kontrollia verkkosisällöistään

Antikainen, H., 2007, In : GT-lehti. 8, 16.

Research output: Contribution to journalArticleProfessional

ACAP-suositus kehitteillä; Kustantajat tavoittelevat parempaa online-sisältöjensä kontrollia

Antikainen, H., 2007, In : GT-lehti. 5, p. 8-9

Research output: Contribution to journalArticleProfessional

A Carbon footprint of an office building

Airaksinen, M. & Matilainen, P., 2011, In : Energies. 4, 8, p. 1197-1210 14 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
29 Citations (Scopus)

A case for 3D printed metal component in injection molding tool, IIW-Document I-1293-16

Kujanpää, V., 2016.

Research output: Contribution to conferenceConference articleScientific

A case study demonstrating the utility of inter-program comparative testing for diagnosing errors in building simulation programs

Beausoleil-Morrison, I., Griffith, B., Vesanen, T., Lerson, S. & Weber, A., 2006, Proceedings of eSim 2006: IBPSA-Canada's 4th Biennal Building Performance Simulation Conference. 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access