Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters

European consumers' perceptions of time-temperature indicators in food packaging

Pennanen, K., Focas, C., Kumpusalo-Sanna, V., Keskitalo-Vuokko, K., Matullat, I., Ellouze, M., Pentikäinen, S., Smolander, M., Korhonen, V. & Ollila, M., 2015, In : Packaging Technology and Science. 28, 4, p. 303-323

Research output: Contribution to journalArticleScientificpeer-review

18 Citations (Scopus)

Complex Packaging Structures Based on Wood Derived Products: Actual and Future Possibilities for 1-Way Food Packages

Schoukens, G., Breen, C., Baschetti, M. G., Elegir, G., Vähä-Nissi, M., Liu, Q., Tiekstra, S. & Simons, P., 2014, In : Journal of Materials Science Research. 3, 4, p. 58 - 67

Research output: Contribution to journalArticleScientificpeer-review

Open Access

Thin Al2O3 barrier coatings onto temperature-sensitive packaging materials by atomic layer deposition

Hirvikorpi, T., Vähä-Nissi, M., Nikkola, J., Harlin, A. & Karppinen, M., 2011, In : Surface and Coatings Technology. 205, 21-22, p. 5088-5092

Research output: Contribution to journalArticleScientificpeer-review

Open Access
74 Citations (Scopus)

Roll-to-roll manufacturing of low cost diagnostics: examples of optical and microfluidic structures

Känsäkoski, M., Liebert, R., Huttunen, O-H., Hiitola-Keinänen, J., Uusitalo, S., Hakalahti, L., Kurkinen, M., Kivimäki, L., Hast, J., Kololuoma, T., Maaninen, A. & Kopola, H., 2008.

Research output: Contribution to conferenceConference articleScientific

Printed oxygen indicators for food packages

Sipiläinen-Malm, T. & Hurme, E., 2008, European Coatings Conference: Food Contact Coatings. Germany, p. 111-127

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Test Methods for Evaluating Grease and Mineral Oil Barriers

Vähä-Nissi, M., Laine, C., Rautkoski, H., Pitkänen, M., Vartiainen, J., Ohra-Aho, T., Sneck, A., Gestranius, M. & Ketoja, J., 2016, Test Methods for Evaluating Grease and Mineral Oil Barriers, 2016 PLACE Conference. TAPPI Press

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Comparison of organic food packages in Denmark, Finland and Italy

Paunonen, S., Pitkänen, M., Leminen, V. & Kainusalmi, M., 2017, Proceedings of the 28th IAPRI Symposium on Packaging 2017. p. 11-26

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Effect of plastic coating on the sensory properties of fibreboard-based packaging materials in microwave oven heating

Heiniö, R-L., Sipiläinen-Malm, T. & Ahvenainen, R., 1993, In : Packaging Technology and Science. 6, 3, p. 129-137

Research output: Contribution to journalArticleScientificpeer-review

Towards low-cost biomicrosystems and disposable sensors

Maaninen, A., Känsäkoski, M., Kopola, H., Kololuoma, T., Aikio, S., Olkkonen, J., Ollitervo, S. & Kivimäki, L., 2004.

Research output: Contribution to conferenceConference articleScientificpeer-review

Digital transformation and trillion sensors in paper business

Kemppainen, A., 2016.

Research output: Contribution to conferenceConference articleScientific

New methods for improving food product safety and communication

Hakola, L., Hartman, J., Honkapää, K., Laakso, P., Penttilä, R., Pitkänen, M., Rusko, E., Sipiläinen-Malm, T., Vanttaja, I. & Peltonen, J., 2013, Proceedings: 29th International conference on Digital Printing Technologies & Digital Fabrication 2013, NIP29. Springfield, VA, USA: The Society for Imaging Science and Technology, IS&T, p. 498-502

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

5 Citations (Scopus)

Spray application of biopolymers and tailored refining as tools in the production of formable paper material for novel applications

Vishtal, A., Retulainen, E., Vuoti, S. & Rantanen, T., 2012, NWBC 2012: The 4th Nordic Wood Biorefinery Conference, Helsinki, Finland, 23 - 25 October 2012. Niemelä, K. (ed.). Kuopio: VTT Technical Research Centre of Finland, p. 380-381 (VTT Technology; No. 53).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Open Access

Factors affecting the suitability of glass jars for heating in microwave ovens: Comparison with plastic jars and paper board tubs

Ahvenainen, R. & Heiniö, R-L., 1993, In : Packaging Technology and Science. 6, 1, p. 43 - 52 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Formability of paper and its improvement: Dissertation

Vishtal, A., 2015, Espoo: VTT Technical Research Centre of Finland. 232 p.

Research output: ThesisDissertation

Open Access

Attitudes of the European printing industry towards innovative combinations of print and digital

Tiekstra, S., Drzková, M., Miranda, P., Isaías, P., Vehmas, K. & Seisto, A., 2016, In : Journal of Print and Media Technology Research. 5, 2, p. 159-172

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Optical coding and detecting systems

Heilmann, J., Hakola, L. & Linna, H., 2007, Intelligent Products and Systems: Technology theme - Final report. Ventä, O. (ed.). Espoo: VTT Technical Research Centre of Finland, p. 62-72 (VTT Publications; No. 635).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleScientific

Open Access

Effect of micro- and nanofibrillated cellulose on the drying shrinkage, extensibility, and strength of fibre networks

Ketola, A., Strand, A., Sundberg, A., Kouko, J., Oksanen, A., Salminen, K., Fu, S. & Retulainen, E., 1 Jan 2019, In : BioResources. 13, 3, p. 5319-5342 24 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
6 Citations (Scopus)

Bio-hybrid nanocomposite coatings from polysaccharides and nanoclay

Vartiainen, J., Tammelin, T., Pere, J., Tapper, U., Nättinen, K., Harlin, A. & Tuominen, M., 2010, Proceedings of the 17th IAPRI World Conference on Packaging. Curran Associates Inc., p. 54-57

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2 Citations (Scopus)

Deep-drawing of paper and paperboard: The role of material properties

Vishtal, A. & Retulainen, E., 2012, In : BioResources. 7, 3, p. 4424-4450 26 p.

Research output: Contribution to journalArticleScientificpeer-review

53 Citations (Scopus)
Open Access
3 Citations (Scopus)

Anti-oxidative and UV-absorbing biohybrid film of cellulose nanofibrils and tannin extract

Li, P., Sirviö, J. A., Haapala, A., Khakalo, A. & Liimatainen, H., 2019, In : Food Hydrocolloids. 92, p. 208-217 10 p.

Research output: Contribution to journalArticleScientificpeer-review

17 Citations (Scopus)

Biohybrid barrier films from fluidized pectin and nanoclay

Vartiainen, J., Tammelin, T., Pere, J., Tapper, U. & Harlin, A., 2010, In : Carbohydrate Polymers. 82, 3, p. 989-996 8 p.

Research output: Contribution to journalArticleScientificpeer-review

42 Citations (Scopus)

Barrier properties of plastic films coated with an Al2O3 layer by roll-to-toll atomic layer deposition

Hirvikorpi, T., Laine, R., Vähä-Nissi, M., Kilpi, V., Salo, E., Lia, W-M., Lindfors, S., Vartiainen, J., Kenttä, E., Nikkola, J., Harlin, A. & Kostamo, J., 2014, In : Thin Solid Films. 550, p. 164 - 169

Research output: Contribution to journalArticleScientificpeer-review

34 Citations (Scopus)

Freshness indicators for food packages

Smolander, M., 2003. 1 p.

Research output: Contribution to conferenceConference articleScientific

Producing pulp and energy from wheat straw

Leponiemi, A., Johansson, A., Edelmann, K. & Sipilä, K., 2010, In : Appita Journal. 63, 1, p. 65-73

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

Leaching of aluminium from aluminium dishes and packages

Liukkonen-Lilja, H. & Piepponen, S., 1992, In : Food Additives and Contaminants. 9, 3, p. 213-223 11 p.

Research output: Contribution to journalArticleScientificpeer-review

40 Citations (Scopus)

Combined mechanical and chemical modifications towards super-stretchable paper-based materials

Khakalo, A., Kouko, J., Filpponen, I., Retulainen, E. & Rojas, O. J., 2016, Book of abstracts.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Enhancing the barrier properties of paper board by a novel lignin coating

Hult Mori, E-L., Ropponen, J., Poppius-Levlin, K., Ohra-Aho, T. & Tamminen, T., 2013, In : Industrial Crops and Products. 50, p. 694-700 6 p.

Research output: Contribution to journalArticleScientificpeer-review

32 Citations (Scopus)

In-mould integration of electronics into mechanics and reliability of overmoulded electronic and optoelectronic components

Alajoki, T., Koponen, M., Juntunen, E., Petaja, J., Heikkinen, M., Ollila, J., Sitomaniemi, A., Kosonen, T., Aikio, J. & Makinen, J-T., 2009, European Microelectronics and Packaging Conference. IEEE Institute of Electrical and Electronic Engineers, p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

6 Citations (Scopus)

Biodegradable barrier coating on paperboard: Effects on biodegradation, recycling and incineration

Sridach, W., Retulainen, E., Nazhad, M. M., Kuusipalo, J. & Parkpian, P., 2006, In : Paperi ja puu. 88, 2, p. 115-120 6 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Hygiene survey in Estonian dairies and pathogen analysis: Master's thesis

Ehavald, H., 2004, Tallinn: Tallinn University of Technology. 72 p.

Research output: ThesisMaster's thesis

Recycled fibres and fibre sludge as reinforcement materials in injection moulded PP and PLA composites

Pääkkönen, E., Wikström, L., Peltola, H., Valta, K. & Retulainen, E., 2017, In : Journal of Bioresources and Bioproducts. 2, 3, p. 116-122

Research output: Contribution to journalArticleScientificpeer-review

Open Access

Mechanical and permeability properties of biodegradable extruded starch / polycaprolactone films

Myllymäki, O., Myllärinen, P., Forssell, P., Suortti, T., Lähteenkorva, K., Ahvenainen, R. & Poutanen, K., 1998, In : Packaging Technology and Science. 11, 6, p. 265-274

Research output: Contribution to journalArticleScientificpeer-review

46 Citations (Scopus)

In-plane compression and biopolymer permeation enable superstretchable fiber webs for thermoforming toward 3-D structures

Khakalo, A., Kouko, J., Filpponen, I., Retulainen, E. & Rojas, O., 2 Oct 2017, In : ACS Sustainable Chemistry & Engineering. 5, 10, p. 9114-9125 12 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Novel biobased micro- and nanomaterials in porous foam formed structures

Torvinen, K., Pöhler, T., Lappalainen, T., Paajanen, A., Sirviö, J. & Ketoja, J., 1 Jan 2017, p. 165-175. 11 p.

Research output: Contribution to conferenceOther conference contributionScientific

Creating value from waste: Opportunities and challenges related to thermochemical recycling of plastic waste

Pihkola, H., Ruohomäki, I. & Oasmaa, A., 12 Sep 2019, Corporate Responsibility Research Conference CRRC2019: Book of Abstracts. University of Tampere, p. 6-7 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Open Access

More accurate method for grease barrier testing

Rautkoski, H., Nykänen, H. & Sneck, A., 2013.

Research output: Contribution to conferenceConference PosterScientific

Properties of antimicrobial plastics containing traditional food preservatives

Vartiainen, J., Skyttä, E., Enqvist, J. & Ahvenainen, R., 2003, In : Packaging Technology and Science. 16, 6, p. 223-229 7 p.

Research output: Contribution to journalArticleScientificpeer-review

35 Citations (Scopus)

Antibacterial and barrier properties of oriented polymer films with ZnO thin films applied with atomic layer deposition at low temperatures

Vähä-Nissi, M., Pitkänen, M., Salo, E., Kenttä, E., Tanskanen, A., Sajavaara, T., Putkonen, M., Sievänen, J., Sneck, A., Rättö, M., Karppinen, M. & Harlin, A., 2014, In : Thin Solid Films. 562, July, p. 331 - 337

Research output: Contribution to journalArticleScientificpeer-review

32 Citations (Scopus)

New method for aroma barrier testing

Vähä-Nissi, M., Hjelt, T., Jokio, M., Kokkonen, R., Kukkonen, J. & Mikkelson, A., 1 Nov 2008, In : Packaging Technology and Science. 21, 7, p. 425-431 7 p.

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

Short and long term reliability of in-mould sealed bare and globtop shielded LED devices

Keränen, K., Silvennoinen, M., Lehto, A., Ollila, J., Salmi, T., Mäkinen, J. T., Ojapalo, A., Schorpp, M., Hoskio, P. & Karioja, P., 2007, 16th European Microelectronics and Packaging Conference and Exhibition 2007, EMPC 2007. IMAPS Nordic, p. 275-279 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

3 Citations (Scopus)

GaAs-SOI integration as a path to low-cost optical interconnects

Aalto, T., Harjanne, M., Kapulainen, M., Ylinen, S., Guina, M., Haring, K., Puustinen, J. & Mikhrin, V., 2011, Integrated Optics: Devices, Materials, and Technologies XV. Broquin, J-E. (ed.). USA: International Society for Optics and Photonics SPIE, 8 p. 79410S. (Proceedings of SPIE, Vol. 7941).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

5 Citations (Scopus)

Recycled fibres and fibre sludge as reinforcement materials in injection molded composites

Pääkkönen, E., Wikström, L., Peltola, H., Valta, K. & Retulainen, E., 2016, 5th International Symposium on Emerging Technologies of Pulping and Papermaking & 3rd International Papermaking and Environment Conference, 5th ISETPP & 3rd IPEC: Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Water-stable cellulose fiber foam with antimicrobial properties for bio based low-density materials

Ottenhall, A., Seppänen, T. & Ek, M., 1 Apr 2018, In : Cellulose. 25, 4, p. 2599-2613 15 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
6 Citations (Scopus)
Open Access

Protein-mediated interfacial adhesion in composites of cellulose nanofibrils and polylactide: Enhanced toughness towards material development

Khakalo, A., Filpponen, I. & Rojas, O. J., 26 May 2018, In : Composites Science and Technology. 160, p. 145-151 7 p.

Research output: Contribution to journalArticleScientificpeer-review

9 Citations (Scopus)

Electrically Conductive Thin Films Based on Nanofibrillated Cellulose: Interactions with Water and Applications in Humidity Sensing

Solin, K., Borghei, M., Sel, O., Orelma, H., Johansson, L. S., Perrot, H. & Rojas, O. J., 12 Aug 2020, In : ACS Applied Materials & Interfaces. 12, 32, p. 36437-36448 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Pakatun kasvihuonekurkun säilyvyyden parantaminen estämällä eteenin haittavaikutukset

Nykänen, H., 2009, Helsinki: University of Helsinki. 128 p.

Research output: ThesisMaster's thesis

Open Access

Coatweight formation and coating color liquid phase penetration in film coating

Forsström, U., Saharinen, E., Dickson, R. J. & Fagerholm, K., 1 Dec 2002, TAPPI Coating and Graphic Arts Conference Trade Fair. Vol. 130. p. 209-223 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2 Citations (Scopus)