Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters

Severe environment electronics

Lahdenperä, M., 1992, In : Mechatronics. 2, 3, p. 301-309 9 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Tärkkelys biohajoavien elintarvikepakkausmateriaalien raaka-aineena: Kirjallisuuskatsaus

Myllymäki, O., Ahvenainen, R., Sipiläinen-Malm, T. & Poutanen, K., 1993, Espoo: VTT Technical Research Centre of Finland. 63 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 1466).

Research output: Book/ReportReport

Coating layer formation and liquid-phase penetration in metered size press coating

Forsström, U., Saharinen, E., Dickson, R. J. & Fagerholm, K., 1 May 2003, In : Journal of Pulp and Paper Science. 29, 5, p. 159-166 8 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Logistics - Increasing intelligence in supply chains

Permala, A., Kotovirta, V., Huovila, H., Maijala, P., Salmela, H. & Hiljanen, H., 2007, Intelligent Products and Systems: Technology theme - Final report. Ventä, O. (ed.). Espoo: VTT Technical Research Centre of Finland, p. 96-105 (VTT Publications; No. 635).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access
1 Citation (Scopus)

Evaluation of sanitation procedures for use in dairies

Wirtanen, G., Langsrud, S., Salo, S., Olofson, U., Alnås, H., Neuman, M., Homleid, J. P. & Mattila-Sandholm, T., 2002, Espoo: VTT Technical Research Centre of Finland. 156 p. (VTT Publications; No. 481).

Research output: Book/ReportReport

Open Access
6 Citations (Scopus)

Antimicrobial coatings – Case EU-Solplas

Vartiainen, J., 2005, p. 4.

Research output: Contribution to conferenceOther conference contributionScientific

Minimal processing of foods

Ahvenainen, R. (ed.), Mattila-Sandholm, T. (ed.) & Ohlsson, T. (ed.), 1994, Espoo: VTT Technical Research Centre of Finland. 239 p. (VTT Symposium; No. 142).

Research output: Book/ReportBook (editor)

1 Citation (Scopus)

3D forming of paperboard: The influence of paperboard properties on formability

Vishtal, A., Hauptmann, M., Zelm, R., Majschak, J-P. & Retulainen, E., 2014, In : Packaging Technology and Science. 27, 9, p. 677-691

Research output: Contribution to journalArticleScientificpeer-review

37 Citations (Scopus)

34th R3-Nordic Contamination Control Symposium

Wirtanen, G. (ed.) & Salo, S. (ed.), 2003, Espoo: VTT Technical Research Centre of Finland. 422 p. (VTT Symposium; No. 229).

Research output: Book/ReportBook (editor)

Open Access

Surface modification of atmospheric plasma activated BOPP by immobilizing chitosan

Vartiainen, J., Rättö, M., Tapper, U., Paulussen, S. & Hurme, E., 2005, In : Polymer Bulletin. 54, 4-5, p. 343 - 352 10 p.

Research output: Contribution to journalArticleScientificpeer-review

44 Citations (Scopus)

Hybrid in-mould integration

Alajoki, T., Koponen, M., Huttunen, A., Tuomikoski, M., Heikkinen, M., Keränen, A., Keränen, K., Mäkinen, J-T., Jaakola, T., Aikio, J. & Rönkä, K., 2013, 46th International Symposium on Microelectronics, IMAPS 2013. Curran Associates Inc., p. 188-193

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Myoglobin-based indicators for the evaluation of freshness of unmarinated broiler cuts

Smolander, M., Hurme, E., Latva-Kala, K., Luoma, T., Alakomi, H-L. & Ahvenainen, R., 2002, In : Innovative Food Science and Emerging Technologies. 3, 3, p. 279-288

Research output: Contribution to journalArticleScientificpeer-review

57 Citations (Scopus)

Formability of paper-based materials

Vishtal, A. & Retulainen, E., 2014, Young Researchers' Abstracts 2014. Stockholm, Sweden

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

An approach for improved 3D formability of paper

Vishtal, A. & Retulainen, E., 2014, p. 11-12.

Research output: Contribution to conferenceConference AbstractScientificpeer-review

Enhancing mechanical performance of cellulose materials with designed structural complexity

Ketoja, J. A., Ivanova, A., Tanaka, A., Nurminen, I. & Kääriäinen, P., Apr 2019.

Research output: Contribution to conferenceConference AbstractScientificpeer-review

Monitoring of taints related to printed solid boards with an electronic nose

Heiniö, R-L. & Ahvenainen, R., 2002, In : Food Additives and Contaminants. 19, Suppl. 1, p. 209-220

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)

Microsystem integration from RF to millimeter wave applications

Vähä-Heikkilä, T. & Lahti, M., 2015, Smart Sensors, Actuators, and MEMS VII; and Cyber Physical Systems. International Society for Optics and Photonics SPIE, 95170R. (Proceedings of SPIE, Vol. 9517).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
File
69 Downloads (Pure)

Priming effect as determined by adding 14C-glucose to modified controlled composting test

Tuomela, M., Hatakka, A., Karjomaa, S. & Itävaara, M., 2002, In : Biodegradation. 13, 2, p. 131-140

Research output: Contribution to journalArticleScientificpeer-review

17 Citations (Scopus)

Uusia keinoja siipikarjan laadunarviointiin

Smolander, M. & Eerola, S., 2003, In : Kehittyvä elintarvike. 14, 2, p. 38-39

Research output: Contribution to journalArticleProfessional

Consumer demand for information accessible through automatic identification

Lindqvist, U., Hakola, L., Federley, M., Laukkanen, M., Mensonen, A. & Viljakainen, A., 2012, In : Packaging Technology and Science. 25, 1, p. 1-6 6 p.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Consumer demand for information accessible through automatic identification

Lindqvist, U., Federley, M., Hakola, L., Mensonen, A. & Viljakainen, A., 2011, Proceedings of the 25th IAPRI Symposium on Packaging, IAPRI 2011. Berlin, Mo.2.C.2

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Safety aspects of polymer films with thin Al2O3 barrier

Vähä-Nissi, M., Pitkänen, M., Putkonen, M., Sievänen, J., Salo, E. & Harlin, A., 2013, In : Coating International. 46, 9, p. 48 - 51

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Atomic Layer Deposited Nanoscale Coatings for Polymer Films

Vähä-Nissi, M., Salo, E., Sievänen, J., Pitkänen, M., Kenttä, E., Rättö, M., Putkonen, M. & Harlin, A., 2014.

Research output: Contribution to conferenceConference articleScientific

VTT research programme on Minimal Processing: Final report

Ahvenainen, R., Autio, K., Helander, I., Honkapää, K., Kervinen, R., Kinnunen, A., Luoma, T., Lyijynen, T., Lähteenmäki, L., Mattila-Sandholm, T., Mokkila, M. & Skyttä, E., 2000, Espoo: VTT Technical Research Centre of Finland. 83 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 2052).

Research output: Book/ReportReport

Open Access

Improving the extensibility of thermoformable web structures with polymer dispersions

Kouko, J., Setälä, H., Ropponen, J. & Retulainen, E., 2016, Progress in Paper Physics Seminar 2016: Conference proceedings. p. 16-22

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Open Access

Industrial Biomaterials Spearhead Programme - IndBioMat

Harlin, A., 2011, Industrial biomaterials: Research highlights. Vikman, M. (ed.). VTT Technical Research Centre of Finland, p. 2-3

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

Omavalvonta ja prosessihygienia paperi- ja pakkausteollisuudessa

Translated title of the contribution: Hygiene and product safety management system and process hygiene in paper and packaging industrySillanpää, J., Raaska, L., Sipiläinen-Malm, T. & Sjöberg, A-M., 1999, Espoo: VTT Technical Research Centre of Finland. 47 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 2004).

Research output: Book/ReportReport

Open Access

Printed hybrid systems

Karioja, P., Mäkinen, J-T., Keränen, K., Aikio, J., Alajoki, T., Jaakola, T., Koponen, M., Keränen, A., Heikkinen, M., Tuomikoski, M., Suhonen, R., Hakalahti, L., Kopola, P., Hast, J., Liedert, R., Hiltunen, J., Masuda, N., Kemppainen, A., Rönkä, K. & Korhonen, R., 2012, Proceedings of SPIE: Nanosensors, Biosensors, and Info-Tech Sensors and Systems 2012. Varadan, V. K. (ed.). International Society for Optics and Photonics SPIE, 13 p. 83440G. (Proceedings of SPIE, Vol. 8344).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

6 Citations (Scopus)

Unobtrusive stress detection on the basis of smartphone usage data

Vildjiounaite, E., Kallio, J., Kyllönen, V., Nieminen, M., Määttänen, I., Lindholm, M., Mäntyjärvi, J. & Gimel'farb, G., 17 Jan 2018, In : Personal and Ubiquitous Computing. 22, 4, p. 671-688 18 p.

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)

Paper as active layer in inkjet-printed capacitive humidity sensors

Gaspar, C., Olkkonen, J., Passoja, S. & Smolander, M., 2017, In : Sensors. 17, 7, 1464.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
35 Citations (Scopus)

Low temperature co-fired ceramics on optoelectronic sensors integration

Moilanen, V., Kautio, K., Karioja, P., Rikola, R., Lehtomaa, J. & Malinen, J., 2007, Optical Sensing Technology and Applications. International Society for Optics and Photonics SPIE, (Proceedings of SPIE, Vol. 6585).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

1 Citation (Scopus)

Personalized mental stress detection with self-organizing map: From laboratory to the field

Tervonen, J., Puttonen, S., Sillanpää, M. J., Hopsu, L., Homorodi, Z., Keränen, J., Pajukanta, J., Tolonen, A., Lämsä, A. & Mäntyjärvi, J., Sep 2020, In : Computers in Biology and Medicine. 124, 103935.

Research output: Contribution to journalArticleScientificpeer-review

Microbiological problems in paper machine environments

Alakomi, H-L., Kujanpää, K., Partanen, L., Suihko, M-L., Salo, S., Siika-aho, M., Saarela, M., Mattila-Sandholm, T. & Raaska, L., 2002, Espoo: VTT Technical Research Centre of Finland. 97 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 2152).

Research output: Book/ReportReport

1 Citation (Scopus)

Roll-to-roll paper sensors (ROPAS); Wireless communicating sensors on paper in the logistic chain

Rentrop, C., Rubingh, E., Lelieveld, R. & Sandberg, H., 2014, Proceedings of the 5th Electronics System-Integration Technology Conference, ESTC 2014. IEEE Institute of Electrical and Electronic Engineers

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

2 Citations (Scopus)

Safety aspects of polymer films with atomic layer deposited Al2O3 thin layers

Vähä-Nissi, M., Sievänen, J., Pitkänen, M., Salo, E. & Harlin, A., 2013.

Research output: Contribution to conferenceConference articleScientificpeer-review

1 Citation (Scopus)

Drivers and Challenges of Bio-based Economy in Europe

Kangas, H., 12 Dec 2019.

Research output: Contribution to conferenceOther conference contributionProfessional

File
83 Downloads (Pure)

Active implant for optoacoustic natural sound enhancement

Mohrdiek, S., Fretz, M., Jose James, R., Spinola Durante, G., Burch, T., Kral, A., Rettenmaier, A., Milani, R., Putkonen, M., Noell, W., Ortsiefer, M., Daly, A., Vinciguerra, V., Garnham, C. & Shah, D., 1 Jan 2017, Optogenetics and Optical Manipulation. Jansen, E. D., Thakor, N. V., Mohanty, S. K. & Thakor, N. V. (eds.). International Society for Optics and Photonics SPIE, Vol. 10052. 100520K. (Proceedings of SPIE, Vol. 10052).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Safety Aspects of Polymer Films with Atomic Layer Deposited Thin Al2O3 Barrier Layers

Vähä-Nissi, M., Pitkänen, M., Salo, E., Sievänen, J., Putkonen, M. & Harlin, A., 2013.

Research output: Contribution to conferenceConference AbstractScientificpeer-review

Technological challenges for future probiotic foods

Mattila-Sandholm, T., Myllärinen, P., Crittenden, R., Mogensen, G., Fonden, R. & Saarela, M., 2002, In : International Dairy Journal. 12, 2-3, p. 173-182

Research output: Contribution to journalArticleScientificpeer-review

447 Citations (Scopus)

The Industrial Track of EuroVR 2018: Proceedings of the 15th Annual EuroVR Conference

Helin, K. (ed.), Poyade, M. (ed.), D'Cruz, M. (ed.) & Eastgate, R. (ed.), 2018, VTT Technical Research Centre of Finland. 49 p. (VTT Technology; No. 339).

Research output: Book/ReportBook (editor)

Open Access
File
148 Downloads (Pure)

Effect of corona pre-treatment on the performance of gas barrier layers applied by atomic layer deposition onto polymer coated paperboard

Hirvikorpi, T., Vähä-Nissi, M., Harlin, A., Marles, J., Miikkulainen, V. & Karppinen, M., 2010, In : Applied Surface Science. 257, 3, p. 736 - 740

Research output: Contribution to journalArticleScientificpeer-review

47 Citations (Scopus)

Hybrid Media in Packages

Lindqvist, U., Federley, M., Hakola, L., Laukkanen, M., Mensonen, A. & Viljakainen, A., 2010, Advances in Printing and Media Technology: Proceedings of the 37th International Research Conference of iarigai . IARIGAI - International Association of Research Organizations for the Printing, Information and Communication Industries, Vol. XXXVII. p. 377-382

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access

Biopohjaiset materiaalit muovin korvaajina

Kangas, H., Pääkkönen, E. & Wikström, L., 28 Sep 2018. 21 p.

Research output: Contribution to conferenceOther conference contributionProfessional

File
114 Downloads (Pure)

Carbon footprint and environmental impacts of print products from cradle to grave: Results from the LEADER project (Part 1)

Pihkola, H., Nors, M., Kujanpää, M., Helin, T., Kariniemi, M., Pajula, T., Dahlbo, H. & Syke, S. K., 1 Dec 2010, VTT Technical Research Centre of Finland. 253 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 2560).

Research output: Book/ReportReport

Open Access
File
3 Citations (Scopus)
130 Downloads (Pure)

Evaluation of the Urban Living Labs in Alby and Peltosaari: SubUrbanLab Deliverable D4.1/4.2

Karlsson, A., Federley, M., Bonnier, E., Holopainen, R., Buhr, K. & Tuominen, P., 2016, 87 p.

Research output: Book/ReportReport

Open Access
File
16 Downloads (Pure)

Telaketju: Towards Circularity of Textiles

Heikkilä, P. (ed.), Cura, K., Heikkilä, J., Hinkka, V., Ikonen, T., Kamppuri, T., Knuutila, H., Kokko, M., Lankiniemi, S., Lehtinen, L., Mäkiö, I., Pitkänen, M. (ed.), Saarimäki, E., Virta, M., Zitting, J. & Harlin, A., 13 May 2019, VTT Technical Research Centre of Finland. 117 p. (VTT Research Report; No. VTT-R-00062-19).

Research output: Book/ReportReport

Open Access
File
756 Downloads (Pure)
Open Access
File
18 Downloads (Pure)

Structural Material From Cellulose Fibres: Design-Driven Research Case

Ivanova, A., 2019, Aalto University. 127 p.

Research output: ThesisMaster's thesisTheses

Open Access
File
2 Downloads (Pure)

The Making of BIOECONOMY TRANSFORMATION

Kruus, K. (ed.) & Hakala, T. (ed.), 2017, VTT Technical Research Centre of Finland. 84 p.

Research output: Book/ReportReport

Open Access
File
238 Downloads (Pure)