Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters
Article

3D forming of paperboard: The influence of paperboard properties on formability

Vishtal, A., Hauptmann, M., Zelm, R., Majschak, J-P. & Retulainen, E., 2014, In : Packaging Technology and Science. 27, 9, p. 677-691

Research output: Contribution to journalArticleScientificpeer-review

37 Citations (Scopus)

Active and intelligent packaging: applications and regulatory aspects

de Kruijf, N., van Beest, M., Rijk, R., Sipiläinen-Malm, T., Paseiro Losada, P. & De Meulenaer, B., 2002, In : Food Additives and Contaminants. 19, Suppl. 1, p. 144-162

Research output: Contribution to journalArticleScientificpeer-review

128 Citations (Scopus)

Active and intelligent packaging systems and the legislative aspects

Rijk, R., van Beest, M., de Kruijf, N., Bouma, K., Martin, C., De Meulenaer, B. & Sipiläinen-Malm, T., 2002, In : Food Packaging Bulletin. 10, 9-10, p. 2-10

Research output: Contribution to journalArticleProfessional

Active and smart packaging for food products

Ahvenainen, R., Hurme, E. & Smolander, M., 1999, In : Verpackungs-Rundschau. Technisch-wissenschaftliche Beilage. 49, 7, p. 36-40 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Active and smart packaging for meeting consumer demands for quality and safety

Ahvenainen, R. & Hurme, E., 1997, In : Food Additives and Contaminants. 14, 6 - 7, p. 753-763

Research output: Contribution to journalArticleScientificpeer-review

72 Citations (Scopus)

An implementation of the HACCP system in the production of food-packaging material

Sjöberg, A-M., Sillanpää, J., Sipiläinen-Malm, T., Weber, A. & Raaska, L., 2002, In : Journal of industrial microbiology and biotechnology. 28, 4, p. 213-218

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)

An overview of methods for biodegradability testing of biopolymers and packaging materials

Itävaara, M. & Vikman, M., 1996, In : Journal of Environmental Polymer Degradation. 4, 1, p. 29-36 8 p.

Research output: Contribution to journalArticleScientificpeer-review

36 Citations (Scopus)

Antibacterial and barrier properties of oriented polymer films with ZnO thin films applied with atomic layer deposition at low temperatures

Vähä-Nissi, M., Pitkänen, M., Salo, E., Kenttä, E., Tanskanen, A., Sajavaara, T., Putkonen, M., Sievänen, J., Sneck, A., Rättö, M., Karppinen, M. & Harlin, A., 2014, In : Thin Solid Films. 562, July, p. 331 - 337

Research output: Contribution to journalArticleScientificpeer-review

32 Citations (Scopus)

Anti-oxidative and UV-absorbing biohybrid film of cellulose nanofibrils and tannin extract

Li, P., Sirviö, J. A., Haapala, A., Khakalo, A. & Liimatainen, H., 2019, In : Food Hydrocolloids. 92, p. 208-217 10 p.

Research output: Contribution to journalArticleScientificpeer-review

17 Citations (Scopus)

Atomic layer deposited aluminum oxide barrier coatings for packaging materials

Hirvikorpi, T., Vähä-Nissi, M., Mustonen, T., Iiskola, E. & Karppinen, M., 2010, In : Thin Solid Films. 518, 10, p. 2654-2658

Research output: Contribution to journalArticleScientificpeer-review

95 Citations (Scopus)

Atomic layer deposited thin barrier films for packaging

Vähä-Nissi, M., Pitkänen, M., Salo, E., Sievänen-Rahijärvi, J., Putkonen, M. & Harlin, A., 2015, In : Cellulose chemistry and technology. 49, 7-8, p. 575-585

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

Attitudes of the European printing industry towards innovative combinations of print and digital

Tiekstra, S., Drzková, M., Miranda, P., Isaías, P., Vehmas, K. & Seisto, A., 2016, In : Journal of Print and Media Technology Research. 5, 2, p. 159-172

Research output: Contribution to journalArticleScientificpeer-review

Barrier properties of plastic films coated with an Al2O3 layer by roll-to-toll atomic layer deposition

Hirvikorpi, T., Laine, R., Vähä-Nissi, M., Kilpi, V., Salo, E., Lia, W-M., Lindfors, S., Vartiainen, J., Kenttä, E., Nikkola, J., Harlin, A. & Kostamo, J., 2014, In : Thin Solid Films. 550, p. 164 - 169

Research output: Contribution to journalArticleScientificpeer-review

34 Citations (Scopus)

Biodegradable barrier coating on paperboard: Effects on biodegradation, recycling and incineration

Sridach, W., Retulainen, E., Nazhad, M. M., Kuusipalo, J. & Parkpian, P., 2006, In : Paperi ja puu. 88, 2, p. 115-120 6 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Biohybrid barrier films from fluidized pectin and nanoclay

Vartiainen, J., Tammelin, T., Pere, J., Tapper, U. & Harlin, A., 2010, In : Carbohydrate Polymers. 82, 3, p. 989-996 8 p.

Research output: Contribution to journalArticleScientificpeer-review

42 Citations (Scopus)

Biopolymer Films and Coatings in Packaging Applications: A Review of Recent Developments

Vartiainen, J., Vähä-Nissi, M. & Harlin, A., 2014, In : Materials Sciences and Applications. 5, 10, p. 708-718

Research output: Contribution to journalArticleScientificpeer-review

Open Access

Coating layer formation and liquid-phase penetration in metered size press coating

Forsström, U., Saharinen, E., Dickson, R. J. & Fagerholm, K., 1 May 2003, In : Journal of Pulp and Paper Science. 29, 5, p. 159-166 8 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Cogrinding Wood Fibers and Tannins: Surfactant Effects on the Interactions and Properties of Functional Films for Sustainable Packaging Materials

Missio, A. L., Mattos, B. D., Otoni, C. G., Gentil, M., Coldebella, R., Khakalo, A., Gatto, D. A. & Rojas, O. J., 11 May 2020, In : Biomacromolecules. 21, 5, p. 1865-1874 10 p.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Comparison of Organic Food Packaging in Denmark, Finland, Germany, Great Britain and Italy

Paunonen, S., Pitkänen, M., Vähä-Nissi, M., Leminen, V. & Kainusalmi, M., 2019, In : Journal of Applied Packaging Research. 11, 1, p. 88-107 20 p., 6.

Research output: Contribution to journalArticleScientificpeer-review

Open Access

Comparison of some coating techniques to fabricate barrier layers on packaging materials

Hirvikorpi, T., Vähä-Nissi, M., Harlin, A. & Karppinen, M., 2010, In : Thin Solid Films. 518, 19, p. 5463-5466

Research output: Contribution to journalArticleScientificpeer-review

52 Citations (Scopus)

Complex Packaging Structures Based on Wood Derived Products: Actual and Future Possibilities for 1-Way Food Packages

Schoukens, G., Breen, C., Baschetti, M. G., Elegir, G., Vähä-Nissi, M., Liu, Q., Tiekstra, S. & Simons, P., 2014, In : Journal of Materials Science Research. 3, 4, p. 58 - 67

Research output: Contribution to journalArticleScientificpeer-review

Open Access

Consumer demand for information accessible through automatic identification

Lindqvist, U., Hakola, L., Federley, M., Laukkanen, M., Mensonen, A. & Viljakainen, A., 2012, In : Packaging Technology and Science. 25, 1, p. 1-6 6 p.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Deep-drawing of paper and paperboard: The role of material properties

Vishtal, A. & Retulainen, E., 2012, In : BioResources. 7, 3, p. 4424-4450 26 p.

Research output: Contribution to journalArticleScientificpeer-review

53 Citations (Scopus)

Effect of corona pre-treatment on the performance of gas barrier layers applied by atomic layer deposition onto polymer coated paperboard

Hirvikorpi, T., Vähä-Nissi, M., Harlin, A., Marles, J., Miikkulainen, V. & Karppinen, M., 2010, In : Applied Surface Science. 257, 3, p. 736 - 740

Research output: Contribution to journalArticleScientificpeer-review

47 Citations (Scopus)

Effect of micro- and nanofibrillated cellulose on the drying shrinkage, extensibility, and strength of fibre networks

Ketola, A., Strand, A., Sundberg, A., Kouko, J., Oksanen, A., Salminen, K., Fu, S. & Retulainen, E., 1 Jan 2019, In : BioResources. 13, 3, p. 5319-5342 24 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
6 Citations (Scopus)

Effect of plastic coating on the sensory properties of fibreboard-based packaging materials in microwave oven heating

Heiniö, R-L., Sipiläinen-Malm, T. & Ahvenainen, R., 1993, In : Packaging Technology and Science. 6, 3, p. 129-137

Research output: Contribution to journalArticleScientificpeer-review

Electrically Conductive Thin Films Based on Nanofibrillated Cellulose: Interactions with Water and Applications in Humidity Sensing

Solin, K., Borghei, M., Sel, O., Orelma, H., Johansson, L. S., Perrot, H. & Rojas, O. J., 12 Aug 2020, In : ACS Applied Materials & Interfaces. 12, 32, p. 36437-36448 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Enhancing the barrier properties of paper board by a novel lignin coating

Hult Mori, E-L., Ropponen, J., Poppius-Levlin, K., Ohra-Aho, T. & Tamminen, T., 2013, In : Industrial Crops and Products. 50, p. 694-700 6 p.

Research output: Contribution to journalArticleScientificpeer-review

32 Citations (Scopus)

Esterified lignin coating as water vapor and oxygen barrier for fiber-based packaging

Hult Mori, E-L., Koivu, K., Asikkala, J., Ropponen, J., Wrigstedt, P., Sipilä, J. & Poppius-Levlin, K., 2013, In : Holzforschung. 67, 8, p. 899-905 6 p.

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)

European consumers' perceptions of time-temperature indicators in food packaging

Pennanen, K., Focas, C., Kumpusalo-Sanna, V., Keskitalo-Vuokko, K., Matullat, I., Ellouze, M., Pentikäinen, S., Smolander, M., Korhonen, V. & Ollila, M., 2015, In : Packaging Technology and Science. 28, 4, p. 303-323

Research output: Contribution to journalArticleScientificpeer-review

18 Citations (Scopus)

Factors affecting the suitability of glass jars for heating in microwave ovens: Comparison with plastic jars and paper board tubs

Ahvenainen, R. & Heiniö, R-L., 1993, In : Packaging Technology and Science. 6, 1, p. 43 - 52 10 p.

Research output: Contribution to journalArticleScientificpeer-review

In-plane compression and biopolymer permeation enable superstretchable fiber webs for thermoforming toward 3-D structures

Khakalo, A., Kouko, J., Filpponen, I., Retulainen, E. & Rojas, O., 2 Oct 2017, In : ACS Sustainable Chemistry & Engineering. 5, 10, p. 9114-9125 12 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Leaching of aluminium from aluminium dishes and packages

Liukkonen-Lilja, H. & Piepponen, S., 1992, In : Food Additives and Contaminants. 9, 3, p. 213-223 11 p.

Research output: Contribution to journalArticleScientificpeer-review

40 Citations (Scopus)

Mechanical and permeability properties of biodegradable extruded starch / polycaprolactone films

Myllymäki, O., Myllärinen, P., Forssell, P., Suortti, T., Lähteenkorva, K., Ahvenainen, R. & Poutanen, K., 1998, In : Packaging Technology and Science. 11, 6, p. 265-274

Research output: Contribution to journalArticleScientificpeer-review

46 Citations (Scopus)

Monitoring of taints related to printed solid boards with an electronic nose

Heiniö, R-L. & Ahvenainen, R., 2002, In : Food Additives and Contaminants. 19, Suppl. 1, p. 209-220

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)

Myoglobin-based indicators for the evaluation of freshness of unmarinated broiler cuts

Smolander, M., Hurme, E., Latva-Kala, K., Luoma, T., Alakomi, H-L. & Ahvenainen, R., 2002, In : Innovative Food Science and Emerging Technologies. 3, 3, p. 279-288

Research output: Contribution to journalArticleScientificpeer-review

57 Citations (Scopus)

Nanocomposite packaging materials from polysaccharides and montmorillonite

Vartiainen, J., Tammelin, T., Tuominen, M., Pere, J., Tapper, U., Nättinen, K. & Harlin, A., 2011, In : Italian Journal of Food Science. 23, SI, p. 77-79 3 p.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

New method for aroma barrier testing

Vähä-Nissi, M., Hjelt, T., Jokio, M., Kokkonen, R., Kukkonen, J. & Mikkelson, A., 1 Nov 2008, In : Packaging Technology and Science. 21, 7, p. 425-431 7 p.

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

Novel, smart and RFID assisted critical temperature indicator for supply chain monitoring

Lorite, G. S., Selkälä, T., Sipola, T., Palenzuela, J., Jubete, E., Viñuales, A., Cabañero, G., Grande, H. J., Tuominen, J., Uusitalo, S., Hakalahti, L., Kordas, K. & Toth, G., 1 Jan 2017, In : Journal of Food Engineering. 193, p. 20-28 9 p.

Research output: Contribution to journalArticleScientificpeer-review

20 Citations (Scopus)
4 Citations (Scopus)

Paper as active layer in inkjet-printed capacitive humidity sensors

Gaspar, C., Olkkonen, J., Passoja, S. & Smolander, M., 2017, In : Sensors. 17, 7, 1464.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
35 Citations (Scopus)

Personalized mental stress detection with self-organizing map: From laboratory to the field

Tervonen, J., Puttonen, S., Sillanpää, M. J., Hopsu, L., Homorodi, Z., Keränen, J., Pajukanta, J., Tolonen, A., Lämsä, A. & Mäntyjärvi, J., Sep 2020, In : Computers in Biology and Medicine. 124, 103935.

Research output: Contribution to journalArticleScientificpeer-review

Priming effect as determined by adding 14C-glucose to modified controlled composting test

Tuomela, M., Hatakka, A., Karjomaa, S. & Itävaara, M., 2002, In : Biodegradation. 13, 2, p. 131-140

Research output: Contribution to journalArticleScientificpeer-review

17 Citations (Scopus)

Printed intelligence in packaging

Hurme, E. & Sipiläinen-Malm, T., 2007, In : Paper360°. 2, 11, p. 25-27

Research output: Contribution to journalArticleProfessional

Producing pulp and energy from wheat straw

Leponiemi, A., Johansson, A., Edelmann, K. & Sipilä, K., 2010, In : Appita Journal. 63, 1, p. 65-73

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

Properties of antimicrobial plastics containing traditional food preservatives

Vartiainen, J., Skyttä, E., Enqvist, J. & Ahvenainen, R., 2003, In : Packaging Technology and Science. 16, 6, p. 223-229 7 p.

Research output: Contribution to journalArticleScientificpeer-review

35 Citations (Scopus)

Protein-mediated interfacial adhesion in composites of cellulose nanofibrils and polylactide: Enhanced toughness towards material development

Khakalo, A., Filpponen, I. & Rojas, O. J., 26 May 2018, In : Composites Science and Technology. 160, p. 145-151 7 p.

Research output: Contribution to journalArticleScientificpeer-review

9 Citations (Scopus)

Recycled fibres and fibre sludge as reinforcement materials in injection moulded PP and PLA composites

Pääkkönen, E., Wikström, L., Peltola, H., Valta, K. & Retulainen, E., 2017, In : Journal of Bioresources and Bioproducts. 2, 3, p. 116-122

Research output: Contribution to journalArticleScientificpeer-review

Open Access

Safety aspects of polymer films with thin Al2O3 barrier

Vähä-Nissi, M., Pitkänen, M., Putkonen, M., Sievänen, J., Salo, E. & Harlin, A., 2013, In : Coating International. 46, 9, p. 48 - 51

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)