Find Research outputs

Search results

• Design for Additive Manufacturing

  Komi, E., 2016, VTT Technical Research Centre of Finland. 23 p. (VTT Research Report, Vol. VTT-R-03159-16).

  Research output: Book/Report › Report

  Open Access

• Thermoplastic Cellulose-Based Compound for Additive Manufacturing

  Immonen, K., Willberg-keyriläinen, P., Ropponen, J., Nurmela, A., Metsä-kortelainen, S., Kaukoniemi, O. & Kangas, H., 18 Mar 2021, In: Molecules. 26, 6, 1701.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  7 Citations (Scopus)

  148 Downloads (Pure)

• 3D printing of high cellulose content materials

  Immonen, K., Metsä-Kortelainen, S., Nurmela, A., Rauta, S-T., Tribot, A., Kaukoniemi, O-V., Kangas, H., Nurmio, J., Tolvanen, E. & Kalpio, T., 2022. 19 p.

  Research output: Contribution to conference › Conference article › Scientific › peer-review

  Open Access

  File
  21 Downloads (Pure)

• 3D Printing of Soft Magnetic Cores For Electrical Machines

  Pippuri, J., Metsä-Kortelainen, S., Lindroos, T., Savolainen, M., Jokinen, A., Revuelta, A., Pasanen, A. & Ruusuvuori, K., 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. Aaltonen, J., Virkkunen, R., Koskinen, K. T. & Kuivanen, R. (eds.). Tampere University of Technology, p. 48-51

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

• Additive manufacturing of spare part supported by digital design concept

  Laitinen, T., Julkunen, P., Laukkanen, A., Puukko, P. & Turunen, E., 2015, Advances in Powder Metallurgy and Particulate Materials : Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2015.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  1 Citation (Scopus)

• Modeling the 3D Printing of Nanocellulose Hydrogels

  Paajanen, A., Pinomaa, T., Pajari, H., Metsä-Kortelainen, S., Lahtinen, P. & Nurmela, A., 2016.

  Research output: Contribution to conference › Conference article › Scientific

• Additive manufacturing processing and common discontinuities

  Kujanpää, V., 2017.

  Research output: Contribution to conference › Conference article › Scientific

• Circular Economy Concept In Additive Manufacturing

  Reijonen, J., Jokinen, A., Puukko, P., Lagerbom, J., Lindroos, T., Haapalainen, M. & Salminen, A., 1 Jan 2017, Euro PM2017 Proceedings. European Powder Metallurgy Association (EPMA)

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  2 Citations (Scopus)

• Manufacturing of topology optimized soft magnetic core through 3D printing

  Metsä-Kortelainen, S., Lindroos, T., Savolainen, M., Jokinen, A., Revuelta, A., Pasanen, A., Ruusuvuori, K. & Pippuri, J., 2016.

  Research output: Contribution to conference › Other conference contribution › Scientific

  Open Access

• Process model for metal additive manufacturing

  Andersson, T., Laukkanen, A. & Pinomaa, T., 2016.

  Research output: Contribution to conference › Conference article › Scientific

• Multiscale materials modeling for metal additive manufacturing

  Laukkanen, A., Andersson, T., Pinomaa, T., Majaniemi, S., Sippola, M. & Suhonen, T., 2016.

  Research output: Contribution to conference › Other conference contribution › Scientific

• Industrialization of hybrid and additive manufacturing - Implementation to Finnish industry (HYBRAM)

  Riipinen, T., Kujanpää, V., Komi, E., Kilpeläinen, P., Savolainen, M., Puukko, P., Vihinen, J., Coatanea, E. & Mokhtarian, H., 26 Nov 2018, VTT Technical Research Centre of Finland. 66 p. (VTT Research Report; No. VTT-R-06411-18).

  Research output: Book/Report › Report

  Open Access

  File
  468 Downloads (Pure)

• Design guide for additive manufacturing of metal components by SLM process

  Kokkonen, P., Salonen, L., Virta, J., Hemming, B., Laukkanen, P., Savolainen, M., Komi, E., Junttila, J., Ruusuvuori, K., Varjus, S., Vaajoki, A., Kivi, S. & Welling, J., 2016, VTT Technical Research Centre of Finland. 131 p. (VTT Research Report, Vol. VTT-R-03160-16).

  Research output: Book/Report › Report

  Open Access

• Workplace Exposure Measurements of Emission from Industrial 3D Printing

  Kangas, A., Kukko, K., Kanerva, T., Säämänen, A., Akmal, J. S., Partanen, J. & Viitanen, A-K., 3 Mar 2023, (E-pub ahead of print) In: Annals of Work Exposures and Health. 13 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

• Data-Driven Optimization Of Metal Additive Manufacturing Solutions

  Laukkanen, A., Pinomaa, T., Andersson, T., Lindroos, M., Yashchuk, I. & Suhonen, T., Oct 2019, Euro PM2019 Proceedings. European Powder Metallurgy Association (EPMA)

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Barriers for industrialization of hybrid and additive manufacturing

  Vihinen, J., Riipinen, T. & Kujanpää, V., 2017.

  Research output: Contribution to conference › Conference article › Scientific

• Industrialization of hybrid and additive manufacturing of metals: Challenges in implementation

  Kujanpää, V., Vihinen, J., Riipinen, T. & Puukko, P., 2017, Proceedings the 2nd Annual SMACC Research Seminar. Aaltonen, J., Koskinen, K., Virkkunen, R. & Kuivanen, R. (eds.). Tampere: Tampere University of Technology, p. 32-36

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

• Component scale process model for metal additive manufacturing

  Andersson, T., Laukkanen, A., Pinomaa, T., Laakso, P., Puukko, P., Lindroos, T. & Laitinen, T., 2016, World PM2016 Proceedings. European Powder Metallurgy Association (EPMA)

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

• The First Functional Prototype of XR System for Additive Manufacturing System’s Maintenance Support

  Helin, K., Karjalainen, J., Kuula, T. & Patrimia, G., 2020, EuroVR 2020 Application, Exhibition & Demo Track: Proceedings of the Virtual EuroVR Conference. Helin, K., de Antonio, A. & Reyes-Lecuona, A. (eds.). VTT Technical Research Centre of Finland, p. 15-18 (VTT Technology; No. 381).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  Open Access

• Extending product life through additive manufacturing: The sustainability implications

  Ford, S. J., Despeisse, M. & Viljakainen, A., 2015. 13 p.

  Research output: Contribution to conference › Conference article › Scientific

• Research in additive manufacturing with the objectives of industry

  Kujanpää, V., 2016. 27 p.

  Research output: Contribution to conference › Conference article › Scientific

• Additive Manufacturing of Silencers with Microperforates

  Tanttari, J., Komi, E., Hynninen, A., Isomoisio, H., Uosukainen, S., Hankaniemi, V. & Matalamäki, M., 14 Oct 2018, In: Advances in Acoustics and Vibration. 2018, 13 p., 7649756.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  3 Citations (Scopus)

• Tunable Ionic Control of Polymeric Films for Inkjet Based 3D Printing.

  Karjalainen, E., Wales, D. J., Gunasekera, D. H. A. T., Dupont, J., Licence, P., Wildman, R. D. & Sans, V., 2018, In: ACS Sustainable Chemistry & Engineering. 6, 3, p. 3984-3991 8 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  21 Citations (Scopus)

• Topology Optimization for Additive Manufacturing of Switched Reluctance Machines

  Manninen, A., Keränen, J., Pippuri-Mäkeläinen, J., Metsä-Kortelainen, S., Lindroos, T. & Riipinen, T., 28 Oct 2018, (Submitted).

  Research output: Contribution to conference › Conference article › Scientific › peer-review

• Method for embedding components during additive manufacturing of metal parts

  Reijonen, J., Pinomaa, T. & Revuelta, A., 15 Jun 2021, IPC No. B33Y 80/ 00 A I, Patent No. FI20205656, Priority date 23 Jun 2020, Priority No. FI20200005656

  Research output: Patent › Patent