Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters

Simulating faults in rotating machines

Jantunen, E., Vähä-Pietilä, K., Halme, J., Katajamäki, K., Virtanen, J. & Volkov, T., 1997, In : Condition Monitor. 128, p. 6-9

Research output: Contribution to journalArticleProfessional

Simulation of faults in rotating machines

Jantunen, E., Vähä-Pietilä, K., Halme, J., Katajamäki, K., Virtanen, J. & Volkov, T., 1997, COMADEM '97: 10th international congress and exhibition on condition monitoring and diagnostic engineering management. Espoo: VTT Technical Research Centre of Finland, Vol. 1. p. 283-292 (VTT Symposium; No. 171).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Measurement-based grease lubrication management

Parikka, R., Jantunen, E., Halme, J., Vaajoensuu, E. & Sainio, H., 1 Dec 2006, In : Tribologia. 25, 4, p. 20-33 14 p.

Research output: Contribution to journalReview ArticleScientificpeer-review

Towards adaptive grease lubrication

Parikka, R., Jantunen, E., Halme, J., Vaajoensuu, E. & Sainio, H., 1 Dec 2006, Prognostics for Industrial Machinery Availabitity: Final Seminar. Helle, A. (ed.). VTT Technical Research Centre of Finland, p. 49-65 17 p. (VTT Symposium; No. 243).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access

Monitoring of Production Processes and the Condition of the Production Equipment through the Internet

Halme, J., Jantunen, E., Hästbacka, D., Hegedűs, C., Varga, P., Björkbom, M., Mesiä, H., More, R., Jaatinen, A., Barna, L., Tuominen, P., Pettinen, H., Elo, M. & Larrañaga, M., 2019, 6th International Conference on Control, Decision and Information Technologies, CoDIT 2019. IEEE Institute of Electrical and Electronic Engineers, p. 1295-1300 6 p. 8820688

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Lubricating oil sensors

Halme, J., Gorritxategi, E. & Bellew, J., 2010, E-maintenance. Holmberg, K., Adgar, A., Arnaiz, A., Jantunen, E., Mascolo, J. & Mekid, S. (eds.). 1st Edition ed. London: Springer, p. 173-196

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleScientificpeer-review

3 Citations (Scopus)

e-Maintenance Supports the Maintenance Engineer

Jantunen, E., 2008. 37 p.

Research output: Contribution to conferenceOther conference contributionProfessional

Keskipakopumppujen energiankäytön tehostaminen

Jantunen, E., 1994, Kunnossapitotekniikka. Tampere, 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Teollisuuden pumppaukset, kannattava energiansäästön ja kunnossapidon kohde

Jantunen, E., 1995. 20 p.

Research output: Contribution to conferenceOther conference contributionProfessional

FM-järjestelmien kunnonvalvonta

Jokinen, H. & Jantunen, E., 1996. 7 p.

Research output: Contribution to conferenceConference articleProfessional

Mittaava kunnossapito: Pumppu-case

Jantunen, E., 1996. 15 p.

Research output: Contribution to conferenceConference articleProfessional

Pumppujen energiansäästö- ja kunnonvalvontamenetelmien kehittäminen

Jantunen, E., 1994. 14 p.

Research output: Contribution to conferenceConference articleProfessional

Diagnosis of centrifugal pumps

Jantunen, E. & Ollila, A., 1996, In : Maintenance. 11, p. 10-16

Research output: Contribution to journalArticleProfessional

e-Maintenance for Optimal Manufacturing

Jantunen, E., 2007. 22 p.

Research output: Contribution to conferenceConference articleScientific

VISION - Kunnonvalvonnan asiantuntijajärjestelmä Eurooppalaisella yhteistyöllä

Jantunen, E. & Mikkonen, H., 1998, In : Kunnossapito. 2, p. 15-17

Research output: Contribution to journalArticleProfessional

Condition monitoring methods for rotating machinery

Kuoppala, R., Jantunen, E. & Enwald, P., 1990. 12 p.

Research output: Contribution to conferenceConference articleScientific

Työkalun kulumisen valvonta lastuavassa työstössä

Jantunen, E., 2006, In : Kunnossapito. 4, p. 50-53

Research output: Contribution to journalArticleProfessional

Diagnosis of centrifugal pumps

Jantunen, E. & Ollila, A., 1996, Euromaintenance '96. Copenhagen, 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Jätteen märkäpoltto: Esitutkimus

Jantunen, M. & Ekman, E., 1978, Espoo: VTT Technical Research Centre of Finland. 22 p. (Valtion teknillinen tutkimuskeskus: Poltto- ja voiteluainelaboratorio. Tiedonanto; No. 19).

Research output: Book/ReportReport

Joustavien valmistusjärjestelmien kunnonvalvonta: Esitelmä

Jokinen, H. & Jantunen, E., 1995. 6 p.

Research output: Contribution to conferenceOther conference contributionProfessional

Mobile Support for e-Maintenance

Jantunen, E., 2007. 10 p.

Research output: Contribution to conferenceConference articleScientific

Pumppujen vikadiagnostiikka

Jantunen, E., 1997. 16 p.

Research output: Contribution to conferenceConference articleProfessional

Miksi vauriot näkyvät signaalissa niin kuin ne näkyvät

Jantunen, E., 2011.

Research output: Contribution to conferenceOther conference contributionProfessional

Kunnossapidon tutkimushankkeet VTT:ssa

Jantunen, E., 1993. 14 p.

Research output: Contribution to conferenceConference articleProfessional

Diagnosis of centrifugal pumps

Jantunen, E. & Ollila, A., 1996. 11 p.

Research output: Contribution to conferenceConference articleScientific

Kunnossapito- ja seisokkikustannukset keskipakopumppauksessa

Jantunen, E., Miettinen, J. & Ollila, A., 1993, In : Kunnossapito. 7, 5, p. 9-13

Research output: Contribution to journalArticleProfessional

Flexible hierarchical neuro-fuzzy system for prognosis

Jantunen, E., 2000, Condition monitoring and diagnostic engineering management; COMADEM 2000 . Elsevier, p. 699-708

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Dynamite an e-Maintenance Solution

Jantunen, E., 2008. 41 p.

Research output: Contribution to conferenceOther conference contributionProfessional

Integrated vibration analysis of a baltic passenger ship

Jantunen, E., Hakala, M. & Rintala, S., 1987, PRADS '87: Proceedings of the 3rd International Symposium Practical Design of Ships and Mobile Units. Trondheim, Vol. 2. p. 818-827

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Voiko pyörivien koneiden jäljellä olevaa elinikää ennustaa?

Jantunen, E., 2005, In : Kunnossapito. 19, 7, p. 49-55

Research output: Contribution to journalArticleProfessional

Älykkäät laitteet ja etädiagnostiikka kunnossapidossa, kehityssuunnat

Jantunen, E., 2002. 10 p.

Research output: Contribution to conferenceConference articleProfessional

A Quick Peek at Maintenance in the Maritime Industries

Bellew, J. & Jantunen, E., 2008. 17 p.

Research output: Contribution to conferenceOther conference contributionScientific

Advanced sensor-based maintenance in real-world exemplary cases

Albano, M., Lino Ferreira, L., Di Orio, G., Maló, P., Webers, G., Jantunen, E., Gabilondo, I., Viguera, M. & Papa, G., 2020, In : Automatika. 61, 4, p. 537-553 17 p.

Research output: Contribution to journalArticleScientific

Open Access
File
15 Downloads (Pure)

Maintenance and downtime costs of centrifugal pumps in Finnish industry

Jantunen, E., Miettinen, J. & Ollila, A., 1994, In : Spectrum. January, p. 6-9

Research output: Contribution to journalArticleProfessional

Electronic maintenance

Emmanouilidis, C., Arnaiz, A., Iung, B. & Jantunen, E., 2008, In : HMS NEWS: Newsletter of the Hellenic Maintenance Society. 8, p. 2-3

Research output: Contribution to journalArticleProfessional

Flexible software for condition monitoring, incorporating novelty detection and diagnostics

Emmanouilidis, C., Jantunen, E. & MacIntyre, J., 2004, Global Challenges in Manufacturing: International IMS Forum 2004. Taisch, M. (ed.). Vol. Part 1. p. 284-292

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

The applicability of various indirect monitoring methods to tool condition monitoring in drilling

Jantunen, E., 2001, Condition monitoring and diagnostic engineering management: Proceedings of the 14th international congress. Starr, A. G. & Rao, R. B. K. N. (eds.). Elsevier, p. 781-791

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Pumppujen kunnonvalvonta

Jantunen, E., 1994, Koneiden käyttövarmuustekniikan seminaari. Holmberg, K. & Andersson, P. (eds.). Espoo: VTT Technical Research Centre of Finland, 14 p. (VTT Valmistustekniikka. Tutkimusraportti; No. VALB20).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

Reduction of data needed in an expert system for condition monitoring of FMS using regression analysis techniques

Jantunen, E. & Jokinen, H., 1996, Condition monitoring and diagnostic engineering management: Proceedings of COMADEM '96. Rao, R. B. K. N., Smith, R. A. & Wearing, J. L. (eds.). Sheffield, 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

European perspective presentation, maintenance trends plus cross EU collaboration experience and opportunities

Jantunen, E., 2015.

Research output: Contribution to conferenceConference articleScientific

Dynamic effects influencing drill wear monitoring

Jantunen, E., 2004, MFPT technologies to meet corporate goals: Proceedings of the 58th Meeting of the Society for Machinery Failure Prevention Technology. p. 51-60

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Automated on-line diagnosis of cutting tool condition

Jantunen, E. & Jokinen, H., 1995, Flexible automation and intelligent manufacturing 1995: Proceedings of the Fifth International FAIM Conference. Ahmad, M. M. & Schraft, R. D. (eds.). New York: Begell house, 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

What new sensor and data transfer technologies together with intelligent systems can give to maintenance: future trends

Jantunen, E., 2002. 9 p.

Research output: Contribution to conferenceConference articleScientific

Dynamics in condition monitoring: A case study

Jantunen, E. & Poikonen, A., 1992, Structural analysis 1992. Espoo: VTT Technical Research Centre of Finland, p. 125-138 (VTT Symposium; No. 128).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Älykäs huolto & digitalisaatio

Jantunen, E., 2016.

Research output: Contribution to conferenceConference articleProfessional

Automated on-line diagnosis of cutting tool condition

Jantunen, E., 1996, In : International Journal of Flexible Automation and Integrated Manufacturing. 4, 3-4, p. 273-287

Research output: Contribution to journalArticleScientificpeer-review

Research and development services for the industry

Jantunen, E. & Mäkelä, K., 1999, In : Condition Monitor. 147, 6.

Research output: Contribution to journalArticleProfessional

Indirect monitoring and diagnosis of drill wear

Jantunen, E., 2006, Proceedings of the 9th CIRP International Workshop on Modeling in Machining Operations. Grabec, I. & Govekar, E. (eds.). University of Ljubljana, p. 405-412

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Tietotekniikan tarjoamat mahdollisuudet kuntoon perustuvassa kunnossapidossa

Jantunen, E., 2016.

Research output: Contribution to conferenceConference articleProfessional

Flexible expert system for automated on-line diagnosis of tool condition

Jantunen, E. & Jokinen, H., 1996, Technology Showcase: Integrated Monitoring, Diagnostics and Failure Prevention. Pusey, H. C. & Pusey, S. C. (eds.). p. 259-268

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific