Find Research Outputs

Search results

• Design for Additive Manufacturing

  Komi, E., 2016, VTT Technical Research Centre of Finland. 23 p. (VTT Research Report, Vol. VTT-R-03159-16).

  Research output: Book/Report › Report

  Open Access

  • 3D printers
  • Printing
  • Costs
  • Metals
  • Geometry

• Manufacturing of topology optimized soft magnetic core through 3D printing

  Metsä-Kortelainen, S., Lindroos, T., Savolainen, M., Jokinen, A., Revuelta, A., Pasanen, A., Ruusuvuori, K. & Pippuri, J., 2016.

  Research output: Contribution to conference › Other conference contribution › Scientific

  Open Access

  • magnetic cores
  • printing
  • topology
  • manufacturing
  • melting

• Circular Economy Concept In Additive Manufacturing

  Reijonen, J., Jokinen, A., Puukko, P., Lagerbom, J., Lindroos, T., Haapalainen, M. & Salminen, A., 1 Jan 2017, Euro PM2017 Proceedings. European Powder Metallurgy Association (EPMA)

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  • economy
  • 3D printers
  • Powders
  • manufacturing
  • scrap
  1 Citation (Scopus)

• Additive manufacturing of spare part supported by digital design concept

  Laitinen, T., Julkunen, P., Laukkanen, A., Puukko, P. & Turunen, E., 2015, Advances in Powder Metallurgy and Particulate Materials : Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2015.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  • spare parts
  • 3D printers
  • manufacturing
  • routes
  • performance

• Cumulative inaccuracies in implementation of additive manufacturing through medical imaging, 3D thresholding, and 3D modeling: A case study for an end-use implant

  Akmal, J. S., Salmi, M., Hemming, B., Teir, L., Suomalainen, A., Kortesniemi, M., Partanen, J. & Lassila, A., 1 Apr 2020, In: Applied Sciences (Switzerland). 10, 8, 2968.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  • 3D modeling
  • Medical imaging
  • 3D printers
  • manufacturing
  • Tomography
  3 Citations (Scopus)

• Structural optimization and additive manufacturing

  Ibabe, J., Jokinen, A., Larkiola, J. & Arruabarrena, G., May 2014, In: Key Engineering Materials. 611-612, p. 811-817

  Research output: Contribution to journal › Article › Scientific › peer-review

  • Stainless Steel
  • Structural optimization
  • Aluminum
  • 3D printers
  • Stainless steel
  5 Citations (Scopus)

• Industrialization of hybrid and additive manufacturing - Implementation to Finnish industry (HYBRAM)

  Riipinen, T., Kujanpää, V., Komi, E., Kilpeläinen, P., Savolainen, M., Puukko, P., Vihinen, J., Coatanea, E. & Mokhtarian, H., 26 Nov 2018, VTT Technical Research Centre of Finland. 66 p. (VTT Research Report; No. VTT-R-06411-18).

  Research output: Book/Report › Report

  Open Access

  File

  • 3D printers
  • Industry
  • Fusion reactions
  • Powders
  • Automation
  266 Downloads (Pure)

• Exploring the Design Freedom of Additive Manufacturing through Simulation: Event Summary

  Reijonen, J., 2019, In: Benchmark . July 2019 , p. 32-35

  Research output: Contribution to journal › Article › Professional

  • 3D printers
  • Technical presentations

• Additive Manufacturing of Silencers with Microperforates

  Tanttari, J., Komi, E., Hynninen, A., Isomoisio, H., Uosukainen, S., Hankaniemi, V. & Matalamäki, M., 14 Oct 2018, In: Advances in Acoustics and Vibration. 2018, 13 p., 7649756.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  • silencers
  • 3D printers
  • massively parallel processors
  • manufacturing
  • Acoustics

• Industrialization of hybrid and additive manufacturing of metals: Challenges in implementation

  Kujanpää, V., Vihinen, J., Riipinen, T. & Puukko, P., 2017, Proceedings the 2nd Annual SMACC Research Seminar. Tampere University of Technology, p. 32 - 36

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

  Open Access

  • 3D printers
  • Stress relief
  • Metals
  • Polishing
  • Printing

• 3D Printing of Soft Magnetic Cores For Electrical Machines

  Pippuri, J., Metsä-Kortelainen, S., Lindroos, T., Savolainen, M., Jokinen, A., Revuelta, A., Pasanen, A. & Ruusuvuori, K., 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. Aaltonen, J., Virkkunen, R., Koskinen, K. T. & Kuivanen, R. (eds.). Tampere University of Technology, p. 48-51 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

  Open Access

  • Magnetic cores
  • 3D printers
  • Printing
  • Silicon steel
  • Machine design

• Design guide for additive manufacturing of metal components by SLM process

  Kokkonen, P., Salonen, L., Virta, J., Hemming, B., Laukkanen, P., Savolainen, M., Komi, E., Junttila, J., Ruusuvuori, K., Varjus, S., Vaajoki, A., Kivi, S. & Welling, J., 2016, VTT Technical Research Centre of Finland. 131 p. (VTT Research Report, Vol. VTT-R-03160-16).

  Research output: Book/Report › Report

  Open Access

• Additive manufacturing—a revolution in progress? Insights from a multiple case study

  Simons, M., 1 Apr 2018, In: The International Journal of Advanced Manufacturing Technology. 96, 1-4, p. 735-749 15 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  • 3D printers
  • Powders
  • Deposition rates
  • Cost benefit analysis
  • Costs
  11 Citations (Scopus)

• Modeling the 3D Printing of Nanocellulose Hydrogels

  Paajanen, A., Pinomaa, T., Pajari, H., Metsä-Kortelainen, S., Lahtinen, P. & Nurmela, A., 2016.

  Research output: Contribution to conference › Conference article › Scientific

  • Nanocellulose
  • Hydrogels
  • Printing
  • Computational fluid dynamics
  • Shear deformation

• Selective laser melting raw material commoditization: impact on comparative competitiveness of additive manufacturing

  Khajavi, S. H., Deng, G., Holmström, J., Puukko, P. & Partanen, J., 18 Jul 2018, In: International Journal of Production Research. 56, 14, p. 4874-4896 23 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  • Commoditization
  • Laser
  • 3D printers
  • Supply chains
  • Titanium
  10 Citations (Scopus)

• Tunable Ionic Control of Polymeric Films for Inkjet Based 3D Printing.

  Karjalainen, E., Wales, D. J., Gunasekera, D. H. A. T., Dupont, J., Licence, P., Wildman, R. D. & Sans, V., 2018, In: ACS Sustainable Chemistry & Engineering. 6, 3, p. 3984-3991 8 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  • ionic liquid
  • Polymer films
  • Ionic Liquids
  • Ionic liquids
  • Negative ions
  10 Citations (Scopus)

• Advanced reactor engineering with 3D printing for the continuous-flow synthesis of silver nanoparticles.

  Okafor, O., Weilhard, A., Fernandes, J. A., Karjalainen, E., Goodridge, R. & Sans, V., 2017, In: Reaction Chemistry and Engineering. 2, 2, p. 129-136 8 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  • Silver nanoparticles
  • Stereolithography
  • Residence time distribution
  • Particle size analysis
  • 3D printers
  38 Citations (Scopus)

• On the effect of shielding gas flow on porosity and melt pool geometry in laser powder bed fusion additive manufacturing

  Reijonen, J., Revuelta, A., Riipinen, T., Ruusuvuori, K. & Puukko, P., Mar 2020, In: Additive Manufacturing. 32, 101030.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  • 3D printers
  • Shielding
  • Powders
  • Flow of gases
  • Porosity
  6 Citations (Scopus)

• Printing on food or food printing: A review

  Pallottino, F., Hakola, L., Costa, C., Antonucci, F., Figorilli, S., Seisto, A. & Menesatti, P., 2016, In: Food and Bioprocess Technology. 9, 5, p. 725-733

  Research output: Contribution to journal › Review Article › peer-review

  • Printing
  • printers
  • Food
  • image analysis
  • food research
  52 Citations (Scopus)

• Techno-economic prospects and desirability of 3D food printing: perspectives of industrial experts, researchers and consumers

  Jayaprakash, S., Paasi, J., Pennanen, K., Ituarte, I. F., Lille, M., Partanen, J. & Sözer, N., 2020, In: Foods. 9, 12, 23 p., 1725.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File

  • Three-Dimensional Printing
  • researchers
  • Economics
  • Food
  • Research Personnel
  11 Downloads (Pure)

• Biomimetic building of 3D printed tailored structures

  Metsä-Kortelainen, S., Vehmas, T., Lagerbom, J., Kronlöf, A., Mahlberg, R. & Heinonen, H., 2014, Espoo: VTT Technical Research Centre of Finland. 16 p. (VTT Research Report, Vol. VTT-R-00669-14).

  Research output: Book/Report › Report

  Open Access

  • biomimetics
  • printing
  • manufacturing
  • crystal growth
  • cements

• Design approaches for additive manufactured components, with a focus on selective laser melting

  Komi, E. & Kokkonen, P., 2017, In: Rakenteiden Mekaniikka. 50, 3, p. 279-282

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  • manufacturing
  • melting
  • lasers
  • assemblies
  • products

• Simulation, Optimization and Design of 3D Printed Sand Molds for Cast Metal Parts

  Komi, E., Kokkonen, P., Virta, J., Puukko, P. & Metsä-Kortelainen, S., 2016.

  Research output: Contribution to conference › Conference article › Scientific

  • Molds
  • Sand
  • Metals
  • 3D printers
  • Quality assurance

• Evaluation of 3D Printed Cobalt Iron Cores for Filter Inductors

  Wang, J., Yuan, X., Riipinen, T., Pippuri-Makelainen, J., Metsa-Kortelainen, S. & Lindroos, T., Aug 2020, In: IEEE Transactions on Magnetics. 56, 8, 9109585.

  Research output: Contribution to journal › Article › Scientific › peer-review

  • Magnetic cores
  • Cobalt
  • Inductance
  • Iron
  • 3D printers

• 3D-Printable Photochromic Molecular Materials for Reversible Information Storage

  Wales, D. J., Cao, Q., Kastner, K., Karjalainen, E., Newton, G. N. & Sans, V., 2018, In: Advanced Materials. 30, 26, p. 1800159 1 p., 1800159.

  Research output: Contribution to journal › Article › Scientific › peer-review

  • polyoxometalate I
  • Ionic liquids
  • Ionic Liquids
  • Photochromism
  • Printing
  36 Citations (Scopus)

• Identifying 3D-printable Spare Parts for a Digitalized Supply Chain

  Reijonen, J., 2017, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Tampere University of Technology, p. 37-40

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  Open Access

  • Supply chains
  • Printing
  • Industry
  • Costs

• 3D-tulostuksen suunnittelu- ja päätöksenteko-opas yrityksille

  Sekhurov, S., Eklund, P., Kujanpää, V., Pekkarinen, J., Syrjälä, K. & Vihinen, J., 2017, 42 p. (DIMECC Publications Series; No. 12).

  Research output: Book/Report › Report

  Open Access

• Shape fidelity and structure of 3D printed high consistency nanocellulose

  Klar, V., Pere, J., Turpeinen, T., Kärki, P., Orelma, H. & Kuosmanen, P., 7 Mar 2019, In: Scientific Reports. 9, 1, p. 3822 3822.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  • Three-Dimensional Printing
  • Nanofibers
  • Freeze Drying
  • Cellulose
  • Porosity
  8 Citations (Scopus)

• Third Wave Do-It-Yourself (DIY): Potential for prosumption, innovation, and entrepreneurship by local populations in regions without industrial manufacturing infrastructure

  Fox, S., 2014, In: Technology in Society. 39, p. 18-30 12 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  • self-initiated work
  • Industrial Region
  • local population
  • entrepreneurship
  • manufacturing
  61 Citations (Scopus)

• A review of digitalisation in the Finnish manufacturing SME companies

  Heilala, J., Helaakoski, H., Kuivanen, R., Kääriäinen, J. & Saari, L., 30 Nov 2020, VTT Technical Research Centre of Finland. 17 p.

  Research output: Book/Report › Report

  Open Access

  File

  • Small and Medium-sized Enterprises (SMEs)
  • Manufacturing
  • Information and Communication Technology
  • Machine Vision
  • Automation Process
  37 Downloads (Pure)

• Structural and textural characteristics of 3D‐Printed protein‐ and dietary fibre‐Rich snacks made of milk powder and wholegrain rye flour

  Lille, M., Kortekangas, A., Heiniö, R. L. & Sozer, N., 23 Oct 2020, In: Foods. 9, 11, 17 p., 1527.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File

  • rye flour
  • Secale
  • whole grain flour
  • Flour
  • Dietary Proteins
  1 Citation (Scopus)

  7 Downloads (Pure)

• The perceived value of additively manufactured digital spare parts in industry: An empirical investigation

  Chekurov, S., Metsä-Kortelainen, S., Salmi, M., Roda, I. & Jussila, A., 10 Sep 2018, In: International Journal of Production Economics. 205, p. 87-97 11 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  • Spare Parts
  • Perceived Value
  • Empirical Investigation
  • 3D printers
  • Focus Groups
  31 Citations (Scopus)

• Diginova Roadmap for digital fabrication

  Puukko, P., Lamminmäki, T., Koskinen, J. T., Eklund, P., Eiroma, K. & al, E., 2014, 131 p.

  Research output: Book/Report › Report

  • Fabrication
  • Printing
  • 3D printers
  • Electronic equipment

• AM tekniikan hyödyntäminen laitesuunnittelussa

  Mäkelä, J., 2012.

  Research output: Contribution to conference › Other conference contribution › Professional

• Component Design for Metal AM

  Komi, E., 2017.

  Research output: Contribution to conference › Other conference contribution › Scientific

• Novel processing technologies for cellulose-based electrical insulation components

  Kangas, H., Metsä-Kortelainen, S., Matysiak, L., Rosing, N. & Kalpio, T., 23 Oct 2018, NWBC 2018: Proceedings of the 8th Nordic Wood Biorefinery Conference. Hytönen, E. & Vepsäläinen, J. (eds.). VTT Technical Research Centre of Finland, p. 261-264 4 p. (VTT Technology; No. 340).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

  Open Access

  • Cellulose
  • Insulation
  • Raw materials
  • Printing
  • Personnel

• Quantitative phase field modeling of solute trapping and continuous growth kinetics in quasi-rapid solidification

  Pinomaa, T. & Provatas, N., 12 Feb 2019, In: Acta Materialia. 168, p. 167-177 11 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  • Growth kinetics
  • Rapid solidification
  • Undercooling
  • Binary alloys
  • Asymptotic analysis
  11 Citations (Scopus)

• Process-to-structure mapping of selective laser melting of a nickel based superalloy via phase field modelling

  Pinomaa, T., Andersson, T. & Laukkanen, A., 2018, Euro PM 2018 Congress and Exhibition. European Powder Metallurgy Association (EPMA)

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  • Selective laser melting
  • Nickel
  • Superalloys
  • heat resistant alloys
  • Solidification

• New business from digital spare parts

  Metsä-Kortelainen, S., Reijonen, J., Riipinen, T., Vaajoki, A., Puukko, P., Salmi, M., Chekurov, S., Björkstrand, R., Kretzschmar, N., Akmal, J., Puttonen, T. & Partanen, J., 2020, VTT Technical Research Centre of Finland. 28 p.

  Research output: Book/Report › Report

  Open Access

  • Manufacturing
  • Compilation
  • Quality Control
  • Automation
  • Conventional

• Soft magnetic alloys for selective laser melting

  Lindroos, T., Riipinen, T., Metsä-Kortelainen, S., Pippuri, J., Lagerbom, J., Revuelta, A. & Metsäjoki, J., 1 Jan 2017, Euro PM2017 Proceedings USB. European Powder Metallurgy Association (EPMA)

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  • magnetic circuits
  • Selective laser melting
  • Magnetic circuits
  • manufacturing
  • melting
  2 Citations (Scopus)

• Determining the shape of reflectance reference samples for curved surface reflectors

  Lanevski, D., Manoocheri, F., Vaskuri, A., Hameury, J., Kersting, R., Monte, C., Adibekyan, A., Kononogova, E. & Ikonen, E., 2020, In: Measurement Science and Technology. 31, 5, 054010.

  Research output: Contribution to journal › Article › Scientific › peer-review

  • Insulator
  • Reflectance
  • Reflector
  • Curved Surface
  • curved surfaces

• Direct laser writing of synthetic poly(amino acid) hydrogels and poly(ethylene glycol) diacrylates by two-photon polymerization

  Käpylä, E., Sedlacík, T., Aydogan, D. B., Viitanen, J., Rypácek, F. & Kellomäki, M., 2014, In: Materials Science and Engineering C: Materials for Biological Applications. 43, p. 280-289

  Research output: Contribution to journal › Article › Scientific › peer-review

  • poly(ethylene glycol)diacrylate
  • Hydrogels
  • Polyethylene glycols
  • Amino acids
  • Photons
  23 Citations (Scopus)

• Process-Structure-Properties-Performance Modeling for Selective Laser Melting

  Pinomaa, T., Yashchuk, I., Lindroos, M., Andersson, T., Provatas, N. & Laukkanen, A., 24 Oct 2019, In: Metals. 9, 11, 1138.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  • Selective laser melting
  • Fatigue of materials
  • Defects
  • Powders
  • Martensite
  2 Citations (Scopus)

• Mesoscale modelling of short crack initiation in metallic selective laser melting microstructures

  Andersson, T., Laukkanen, A., Pinomaa, T., Jokinen, A., Vaajoki, A. & Laitinen, T., 2015, EURO PM2015 congress proceedings. European Powder Metallurgy Association (EPMA)

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  • Crack initiation
  • Microstructure
  • Fatigue of materials
  • Defects
  • Residual stresses
  1 Citation (Scopus)

• Machine performance and availability prediction through the lifetime

  Kivikytö-Reponen, P., Tiusanen, R., Halme, J., Raunio, K. & Saarela, O., 2017, Proceedings. Tampere University of Technology, p. 5-7

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  • Machinery
  • Availability
  • Electric batteries
  • 3D printers
  • Sustainable development

• SERPENT validation and optimization with mesh adaptive search on stereolithography geometry models

  Talamo, A., Gohar, Y. & Leppänen, J., 1 May 2018, In: Annals of Nuclear Energy. 115, p. 619-632 14 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  • Stereolithography
  • Geometry
  • Research reactors
  • Neutrons
  • 3D printers
  5 Citations (Scopus)

• Impact of Topology Optimization Problem Setup on Switched Reluctance Machine Design

  Manninen, A., Keränen, J., Pippuri-Mäkeläinen, J., Riipinen, T., Metsä-Kortelainen, S. & Lindroos, T., Jul 2019, 2019 22nd International Conference on the Computation of Electromagnetic Fields (COMPUMAG). IEEE Institute of Electrical and Electronic Engineers, 9032826

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  • Machine design
  • Shape optimization
  • Torque
  • Rotors
  • Reluctance motors

• Business model experimentations in advancing B2B sharing economy research

  Antikainen, M., Aminoff, A. & Heikkilä, J., 17 Jun 2018, ISPIM Innovation Conference 2018: Innovation, The Name of the Game – Stockholm, Sweden, 17-20 June 2018. Bitran, I., Conn, S., Huizingh, K. R. E., Kokshagina, O., Torkkeli, M. & Tynnhammar, M. (eds.). Lappeenranta University of Technology, (LUT Scientific and Expertise Publications: Research Reports; No. 78).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

  • Industry
  • 3D printers
  • Testing
  • Costs

• Heat treatment of AM alloys

  Riipinen, T., 22 Oct 2020, VTT Technical Research Centre of Finland. 33 p. (VTT Research Report; No. VTT-R-00899-20).

  Research output: Book/Report › Report

  Open Access

  File
  35 Downloads (Pure)

• Hybrid Thermal Modeling to Predict LED Thermal Behavior in Hybrid Electronics

  Hannila, E., Heinilehto, N., Remes, K., Lauri, J., Keranen, K. & Fabritius, T., 2021, In: IEEE Transactions on Instrumentation and Measurement. 70, 9286559.

  Research output: Contribution to journal › Article › Scientific › peer-review

  • Light emitting diodes
  • Electronic equipment
  • light emitting diodes
  • electronics
  • Hot Temperature