Find Research outputs

Search results

• Foam forming: Effects of different variables on fiber foam characteristics

  Salminen, K., Lappalainen, T., Kiiskinen, H. T. & Sinkkonen, M., 2015, Paper Conference and Trade Show (PaperCon 2015). Curran Associates Inc., p. 1379-1389

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  1 Citation (Scopus)

• Progress in foam forming technology

  Kiiskinen, H. & Hellén, E., 1 Jan 2017, Paper Conference and Trade Show, PaperCon 2017: Renew, Rethink, Redefine the Future. TAPPI Press, Vol. 1. p. 571-584 133253

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  1 Citation (Scopus)

• Foam forming technology enables utilization of long fibers

  Torvinen, K., 2016.

  Research output: Contribution to conference › Conference article › Professional

• Biocomposites using Foam Forming Technology

  Immonen, K., Lappalainen, T., Asikainen, J., Nikinmaa, M. & Salminen, K., 1 Mar 2023.

  Research output: Contribution to conference › Conference Poster › Scientific

• Laboratory scale investigation of foam forming

  Lappalainen, T., Salminen, K., Kinnunen, K., Järvinen, M., Mira, I., Boge, L., Andersson, M. & Carlsson, G., 2012.

  Research output: Contribution to conference › Conference Poster › Scientific

• Biocomposites through foam-forming of long fiber suspensions

  Prakash (PhD), B., Lappalainen, T., Immonen, K., Asikainen, J., Kristian, S. & Nikinmaa, M., May 2024, 2024 TAPPICon Proceedings. 14 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  Open Access

  File
  41 Downloads (Pure)

• Foam Forming under Dynamic Conditions

  Lehmonen, J. (Corresponding Author), Retulainen, E., Kraft, M., Paltakari, J. & Kinnunen-Raudaskoski, K., 2020, In: BioResources. 15, 3, p. 6309-6331 23 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  3 Citations (Scopus)

  192 Downloads (Pure)

• Progress in foam forming technology

  Kiiskinen, H. (Corresponding Author), Salminen, K., Lappalainen, T., Asikainen, J., Keränen, J. T. & Hellen, E., 2019, In: Tappi Journal. 18, 8, p. 499-510 12 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  11 Citations (Scopus)

• Breakthrough in papermaking resource efficiency with foam forming

  Poranen, J., Kiiskinen, H., Salmela, J., Asikainen, J., Keränen, J. T. & Pääkkönen, E., 2013, Paper Conference and Trade Show, PaperCon 2013. TAPPI Press, Vol. 1. p. 807-814

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  32 Citations (Scopus)

• Foam forming: What could it mean for tissue?

  Hellen, E., Jetsu, P. & Lehmonen, J., 2013, In: Paper Technology. 54, 4, p. 10-12

  Research output: Contribution to journal › Article › Scientific › peer-review

  12 Citations (Scopus)

• Foam forming technology enables utilization of long fibers

  Katariina, T., Kiiskinen, H., Jäsberg, A., Martikainen, P., Asikainen, J. & Koponen, A., 2015.

  Research output: Contribution to conference › Conference Abstract › Scientific

• Effect of amphiphilic compounds in foam forming

  Xiang, W., Li, S., Filpponen, I., Saharinen, E., Salminen, K., Lappalainen, T. & Rojas, O. J., 1 Jan 2017, Paper Conference and Trade Show, PaperCon 2017: Renew, Rethink, Redefine the Future. TAPPI Press, Vol. 1. p. 520-531

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Foam forming technology enables new possibilities for paper industry

  Pääkkönen, E., Koponen, A. & Kiiskinen, H., 2017.

  Research output: Contribution to conference › Conference Abstract › Scientific

• Foam forming technology folding box board focused developments

  Bunker, D., Cecchini, J., Hietaniemi, M., Martikainen, P. & Salminen, K., 1 Jan 2017, Paper Conference and Trade Show, PaperCon 2017: Renew, Rethink, Redefine the Future. TAPPI Press, Vol. 1. p. 585-596

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  4 Citations (Scopus)

• Foam forming for tissue and nonwovens

  Lehmonen, J., Pöhler, T., Hjelt, T., Kiiskinen, H., Hellén, E., Tanaka, A. & Ketoja, J., 2015, Paper Conference and Trade Show: PaperCon 2015. TAPPI Press, Vol. 2. p. 1390-1400 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Scientific

  1 Citation (Scopus)

• Foam forming of fiber products: A review

  Hjelt, T., Ketoja, J. A. (Corresponding Author), Kiiskinen, H., Koponen, A. I. & Pääkkönen, E., 2022, In: Journal of Dispersion Science and Technology. 43, 10, p. 1462-1497 36 p.

  Research output: Contribution to journal › Review Article › peer-review

  Open Access
  54 Citations (Scopus)

• The effect of in-line foam generation on foam quality and sheet formation in foam forming

  Koponen, A. (Corresponding Author), Jäsberg, A., Lappalainen, T. & Kiiskinen, H., 2018, In: Nordic Pulp and Paper Research Journal. 33, 3, p. 482-495

  Research output: Contribution to journal › Article › Scientific › peer-review
  19 Citations (Scopus)

• Foam forming: Potential production technology for building materials

  Jetsu, P. & Pöhler, T., 2017.

  Research output: Contribution to conference › Other conference contribution › Scientific

  Open Access

• Formable cellulose-based webs enabled by foam forming technology

  Salminen, K., Lappalainen, T., Hjelt, T., Kiiskinen, H., Jetsu, P. & Kouko, J., 2023, Rock the Roll: Unleashing the Harmonies of the Paper Industry: Proceedings of the TAPPICon 2023. TAPPI Press, Vol. 1. p. 648-656

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Upscaling of foam forming technology for pilot scale

  Lehmonen, J. (Corresponding Author), Rantanen, T. & Kinnunen-Raudaskoski, K., 2019, In: Tappi Journal. 18, 8, p. 461-471

  Research output: Contribution to journal › Article › Scientific › peer-review
  7 Citations (Scopus)

• Editorial: Foam forming: Technology of many opportunities

  Rosencrance, S. & Kiiskinen, H., 2019, In: Tappi Journal. 18, 8, p. 457-458 2 p.

  Research output: Contribution to journal › Article › Scientific

• Foam forming technology: Pushing the limits of traditional specialty paper manufacturing

  Salminen, K. & Kiiskinen, H., 10 Apr 2019.

  Research output: Contribution to conference › Other conference contribution › Professional

• Biodegradable filtration material by foam forming and electrospinning

  Ketoja, J. A., Saurio, K., Rautkoski, H., Kenttä, E., Tanaka, A., Koponen, A. I., Virkajärvi, J., Heinonen, K., Kostamo, K., Järvenpää, A., Hyry, N., Heikkilä, P., Hankonen, N. & Harlin, A., 27 Sept 2023, ICC2022+1: Book of Program & Abstracts. The Cellulose Society of Japan, p. 67 OA01

  Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Scientific

• Foam forming: An interesting tool for the nonwoven industry

  Salminen, K., Kiiskinen, H. & Heikkilä, P., 2019, Paper Conference and Trade Show, PaperCon 2019. TAPPI Press, Vol. 2. p. 1518-1527

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Foam forming of long fibers

  Koponen, A. (Corresponding Author), Torvinen, K., Jäsberg, A. & Kiiskinen, H., 2016, In: Nordic Pulp and Paper Research Journal. 31, 2, p. 239-247

  Research output: Contribution to journal › Article › Scientific › peer-review
  37 Citations (Scopus)

• The effect of long fibers on sheet properties in foam forming

  Koponen, A., Torvinen, K., Jäsberg, A. & Kiiskinen, H., 2016, Paper Conference and Trade Show (PaperCon 2016). TAPPI Press, Vol. 2. p. 894-904

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Feasibility of foam forming technology for producing wood plastic composites

  Immonen, K. (Corresponding Author), Jetsu, P., Keränen, J. T. & Torvinen, K., 5 Dec 2020, In: Journal of Applied Polymer Science. 137, 45, 12 p., 49404.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  10 Citations (Scopus)

  250 Downloads (Pure)

• Bulky paper and board at a high dry solids content with foam forming

  Torvinen, K., Lahtinen, P., Kiiskinen, H., Hellen, E. & Koponen, A., 2015, Past and Future of OCC Systems, 2015 PaperCon Conference. TAPPI Press, p. 757-766

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  8 Citations (Scopus)

• Density development in foam forming: Wet pressing dynamics

  Järvinen, M., Pihko, R. & Ketoja, J. A. (Corresponding Author), 26 Jul 2018, In: Nordic Pulp and Paper Research Journal. 33, 2, p. 226-236 11 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  8 Citations (Scopus)

• Foam forming gives bulky board at a high dry solids content

  Torvinen, K., Kiiskinen, H., Hellen, E. & Koponen, A., 2014.

  Research output: Contribution to conference › Conference Abstract › Scientific

• Piloting of sustainable multilayer air-filter by stratified foam forming

  Oksanen, A., 2023, Proceedings of TAPPICon 2023. TAPPI Press, p. 894-897

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Enhancing mechanical performance of lightweight fibre structures with foam forming technology

  Ketoja, J., Paunonen, S., Timofeev, O. & Torvinen, K., 2017.

  Research output: Contribution to conference › Conference Abstract › Scientific

• Foam forming-the effects of surfactant type on characteristics of fiber-foam suspension and properties of formed fiber network

  Salminen, K., Lappalainen, T., Kinnunen-Raudaskoski, K., Andersson, M., Carlsson, G. & Mira, I., 2014, Tappi Proceedings: PaperCon 2014 . TAPPI Press, Vol. 1-3. p. 758-765

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Foam Forming Technology: Pushing the Limits of the Wetlaid Process

  Kiiskinen, H. (Corresponding author), Salminen, K. & Heikkilä, P., 11 Oct 2018.

  Research output: Contribution to conference › Other conference contribution › Scientific › peer-review

• Sustainable Nonwoven Materials by Foam Forming Using Cellulosic Fibres and Recycled Materials

  Heikkilä, P., Jetsu, P., Kinnunen, K., Määttänen, M., Valta, K. & Harlin, A., 2013, Proceedings of the 7th Aachen-Dresden International Textile Conference. Hillmer, J. (ed.). Aachen

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Professional

• Real-time monitoring of bubble size distribution in a foam forming process

  Koponen, A. (Corresponding Author), Eloranta, H., Jäsberg, A., Honkanen, M. & Kiiskinen, H., Aug 2019, In: Tappi Journal. 18, 8, p. 487-494 8 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  12 Citations (Scopus)

• Wood fibre based thermal insulation and sound absorption materials made by foam forming

  Pöhler, T., Pääkkönen, E. & Jetsu, P., 2016.

  Research output: Contribution to conference › Conference article › Scientific

• The relation between bubble-fibre interaction and material properties in foam forming

  Ketola, A., Hjelt, T., Lappalainen, T., Pajari, H., Tammelin, T., Salminen, K., Lee, K.-Y., Rojas, O. J. & Ketoja, J. A., 29 Aug 2022, Advances in Pulp and Paper Research, Cambridge 2022: Transactions of the 17th Fundamental Research Symposium. Coffin, D. W. & Batchelor, W. J. (eds.). Pulp & Paper Fundamental Research Society, Vol. 1. p. 65-84

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  Open Access

  File
  32 Downloads (Pure)

• Foam forming revisited: Part II. Effect of surfactant on the properties of foam-formed paper products

  Lappalainen, T., Salminen, K., Kinnunen, K., Järvinen, M., Mira, I. & Andersson, M., 2014, In: Nordic Pulp and Paper Research Journal. 29, 4, p. 689-699

  Research output: Contribution to journal › Article › Scientific › peer-review
  34 Citations (Scopus)

• Real-time monitoring of bubble size distribution in foam forming process

  Eloranta, H., Jäsberg, A., Martikainen, P. & Kiiskinen, H., 1 Jan 2017, Paper Conference and Trade Show, PaperCon 2017: Renew, Rethink, Redefine the Future. TAPPI Press, Vol. 1. p. 532-540

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Benchmarking new wood fibre-based sound absorbing material made with a foam-forming technique

  Pöhler, T. (Corresponding Author), Jetsu, P. & Isomoisio, H., 2016, In: Building Acoustics. 23, 3-4, p. 131-143

  Research output: Contribution to journal › Article › Scientific › peer-review
  42 Citations (Scopus)

• Foam-laid extensible paper for improved extensibility and press-forming performance

  Kouko, J., Tanninen, P., Leminen, V., Barbier, C., Karlsson, C., Pesonen, A. & Hjelt, T., Jul 2024, In: Cellulose. 31, 11, p. 6955-6973

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  13 Downloads (Pure)

• The use of co-surfactant to prevent the precipitation of an anionic surfactant in foam forming

  Viitala, J. (Corresponding author), Lappalainen, T. & Järvinen, M., 2020, Progress in Paper Physics Seminar : Abstract book of the PPPS2020 seminar. Kouko, J., Lehto, J. & Tuovinen, T. (eds.). Espoo: VTT Technical Research Centre of Finland, p. 293-295 (VTT Technology; No. 378).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  Open Access

• New opportunities in the paper and nonwovens industries with foam-assisted web forming and chemical application

  Oksanen, A. (Corresponding Author), Hjelt, T., Lehmonen, J., Rantanen, T., Asikainen, J. & Salminen, K., 2023, In: Tappi Journal. 22, 1, p. 61-66 6 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

• Properties of lightweight fibrous structures made by a novel foam forming technique

  Burke, S. R. (Corresponding Author), Möbius, M. E., Hjelt, T. & Hutzler, S., 15 Mar 2019, In: Cellulose. 26, 4, p. 2529-2539 11 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  28 Citations (Scopus)

• Foam forming revisited: Part I. Foaming behaviour of fibre-surfactant systems

  Mira, I., Andersson, M., Boge, L., Blute, I., Carlsson, G., Salminen, K., Lappalainen, T. & Kinnunen, K., 2014, In: Nordic Pulp and Paper Research Journal. 29, 4, p. 679-688

  Research output: Contribution to journal › Article › Scientific › peer-review
  38 Citations (Scopus)

• Analysis of the foam-forming of non-woven lightweight fibrous materials using X-ray tomography

  Burke, S. R. (Corresponding Author), Möbius, M. E., Hjelt, T., Ketoja, J. A. & Hutzler, S., Feb 2021, In: SN Applied Sciences. 3, 2, 15 p., 192.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  10 Citations (Scopus)

• Bubble Attachment to Cellulose and Silica Surfaces of Varied Surface Energies: Wetting Transition and Implications in Foam Forming

  Ketola, A. E., Xiang, W., Hjelt, T., Pajari, H., Tammelin, T., Rojas, O. J. & Ketoja, J. A. (Corresponding Author), 8 Jun 2020, In: Langmuir. 36, 26, p. 7296-7308

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  18 Citations (Scopus)

• Foam-formed fibre materials: Tailoring material performance by foam-fibre interaction

  Ketola, A., Hjelt, T., Pajari, H., Lappalainen, T., Tammelin, T. & Ketoja, J. A., Jul 2018. 1 p.

  Research output: Contribution to conference › Conference Abstract › Scientific › peer-review

• Method of forming a fibrous product

  Kiiskinen, H. (Inventor), Torniainen, E. (Inventor) & Kinnunen-Raudaskoski, K. (Inventor), 30 Apr 2016, IPC No. B29C33/42, B29C67/20, C08J9/00, C08J9/30, D21H21/24, D21H21/56, Patent No. US10259151B2, 15 Sept 2014, Priority date 13 Sept 2013, Priority No. FI20135922A

  Research output: Patent › Patent