Search concepts
|
Selected filters
|
- 1 - 50 out of 390 results
Search results
-
Towards roll to roll manufacturing of flexible OLED devices
Maaninen, A., Tuomikoski, M., Välimäki, M., Maaninen, T. & Kopola, H., 2007.Research output: Contribution to conference › Conference Abstract › Scientific
-
Roll-to-roll printed and flexible electronics for wearable, healthcare and IoT
Kemppainen, A. & Rönkä, K., 2015, 2015 ICFPE: Program Book.Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific
-
Roll-to-roll compatible OTFT manufacturing technique by lamination
Hassinen, T. & Ruotsalainen, T., 2012, 8th International Thin-Film Transistor Conference, ITC 2012, 30 - 31 January 2012, Lisbon, Portugal - Book of abstracts. Universidade Nova de Lisboa, 109Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Scientific
-
Toward roll-to-roll printed power sources and control electronics
Hast, J., Solehmainen, K. & Vilkman, M., 2010, In: Photonics Spectra. 44, 6Research output: Contribution to journal › Article › Scientific › peer-review
-
Roll-to-Roll printed transparent OLEDs
Tuomikoski, M., Suhonen, R. & Hast, J., 2012, Proceedings: 8th International Conference on Organic Electronics, ICOE 2012.Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Scientific
-
Roll-to-roll printed flexible Sensors
Hast, J., Alastalo, A., Jansson, E., Kemppainen, A., Kololuoma, T., Tuomikoski, M. & Kopola, H., 2014, IMAPS Nordic Annual Conference 2014. Kutilainen, J. (ed.). Oulu: IMAPS Nordic, p. 93-105Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
-
Roll-to-Roll manufacturing of printed OLEDs
Hast, J., Tuomikoski, M., Suhonen, R., Väisänen, K-L., Välimäki, M., Maaninen, T., Apilo, P., Alastalo, A. & Maaninen, A., 2013, In: SID International Symposium: Digest of Technical Papers. 44, 1, p. 192-195 3 p.Research output: Contribution to journal › Article › Scientific › peer-review
35 Citations (Scopus) -
All-optical difference engine for in-process defect inspection for roll-to-roll printed electronics
Feng, X., Su, R., Happonen, T., Liu, J. & Leach, R., 7 Mar 2019, Tenth International Symposium on Precision Engineering Measurements and Instrumentation. Tan, J. & Lin, J. (eds.). International Society for Optics and Photonics SPIE, p. 1105308-1-1105308-8 8 p. 1105308. (Proceedings of SPIE, Vol. 11053).Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
-
Verification of roll-to-roll printing quality for printed wiring backplanes with automated roll-to-roll electrical test equipment
Happonen, T., Kokko, T., Juntunen, E. & Rönkä, K., 2018, LOPEC Conference Proceedings.Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Professional
-
Roll-to-Roll Manufacturing of Printed Organic Photovoltaics
Jansson, E., Kololuoma, T., Vilkman, M., Väisänen, K-L., Ylikunnari, M. & Välimäki, M., 2018.Research output: Contribution to conference › Conference Abstract › Scientific
-
Roll-to-roll manufacturing of low cost diagnostics: examples of optical and microfluidic structures
Känsäkoski, M., Liebert, R., Huttunen, O-H., Hiitola-Keinänen, J., Uusitalo, S., Hakalahti, L., Kurkinen, M., Kivimäki, L., Hast, J., Kololuoma, T., Maaninen, A. & Kopola, H., 2008.Research output: Contribution to conference › Conference article › Scientific
-
Roll-to-roll functional testing of printed conductors and organic light emitting devices
Happonen, T., Tuomikoski, M., Kokko, T. & Rönkä, K., 29 Nov 2018, 2018 7th Electronic System-Integration Technology Conference (ESTC). IEEE Institute of Electrical and Electronic Engineers, p. 1-5 5 p. 8546333Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
3 Citations (Scopus) -
Roll-To-Roll Screen-Printed Silver Conductors on a Polydimethyl Siloxane Substrate for Stretchable Electronics
Huttunen, O. H., Happonen, T., Hiitola-Keinänen, J., Korhonen, P., Ollila, J. & Hiltunen, J., 30 Oct 2019, In: Industrial and Engineering Chemistry Research. 58, 43, p. 19909-19916 8 p.Research output: Contribution to journal › Article › Scientific › peer-review
Open Access24 Citations (Scopus) -
Novel substrates for applications of roll-to-roll printed and hybrid functionalities
Hast, J., Tuomikoski, M., Hiltunen, J., Välimäki, M., Huttunen, O-H., Hiitola-Keinänen, J., Jurvansuu, M. & Pöhler, T., 27 Nov 2018.Research output: Contribution to conference › Other conference contribution › Scientific › peer-review
-
Roll-to-roll manufacturing technologies of OLEDs for signage and lighting
Suhonen, R., Tuomikoski, M., Maaninen, A. & Kopola, H., 2005, Conference Proceedings of Printed Electronics USA 2005.Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
-
Defect Recognition of Roll-to-Roll Printed Conductors Using Dark Lock-In Thermography and Localized Segmentation
Zheng, H., Zhou, L., Marks, R., Happonen, T. & Kraft, T., 15 Feb 2022, In: Applied Sciences. 12, 4, 16 p., 2005.Research output: Contribution to journal › Article › Scientific › peer-review
Open AccessFile15 Downloads (Pure) -
Roll to roll manufacturing of flexible hybrid systems
Kemppainen, A. & Rönkä, K., 2016.Research output: Contribution to conference › Conference article › Professional
-
Roll-to-roll printing of organic photovaltaic cells and modules: Dissertation
Apilo, P., 2015, Espoo: VTT Technical Research Centre of Finland. 154 p.Research output: Thesis › Dissertation › Collection of Articles
Open Access -
Towards Roll-to-roll fabricated integrated modules
Hast, J., Kololuoma, T., Kopola, H., Maaninen, A., Petäjä, J., Sandberg, H. & Tuomikoski, M., 2006, Proceedings of Printed Electronics Europe 06. 19.-21. 4.. CanbridgeResearch output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific
-
Towards roll-to-roll fabrication of OLED’s
Maaninen, A. & Tuomikoski, M., 2005, Proceedings of the Plastic Electronics 2005.Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
-
Accuracy control for roll and sheet processed printed electronics on flexible plastic substrates
Välimäki, M. K., Jansson, E., Von Morgen, V. J. J., Ylikunnari, M., Väisänen, K. L., Ontero, P., Kehusmaa, M., Korhonen, P. & Kraft, T. M., Apr 2022, In: International Journal of Advanced Manufacturing Technology. 119, 9-10, p. 6255-6273 19 p.Research output: Contribution to journal › Article › Scientific › peer-review
Open Access -
Quality assurance for rotary screen printed wiring backplanes with automated roll-to-roll electrical test equipment
Happonen, T., Kokko, T., Juntunen, E. & Rönkä, K., Apr 2019, In: Flexible and Printed Electronics. 4, 2, 025002.Research output: Contribution to journal › Article › Scientific › peer-review
Open Access4 Citations (Scopus) -
Towards roll-to-roll fabrication of electronics, optics and optoelectronics for smart and intelligent packaging
Kololuoma, T., Tuomikoski, M., Mäkelä, T., Heilmann, J., Haring, T., Kallioinen, J., Hagberg, J., Kettunen, I. & Kopola, H., 2004, Emerging Optoelectronic Applications. International Society for Optics and Photonics SPIE, p. 77-85 (Proceedings of SPIE, Vol. 5363).Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
42 Citations (Scopus) -
Fully solution-processed organic thin-film transistors by consecutive roll-to-roll gravure printing
Kim, J., Hassinen, T., Lee, W. H. & Ko, S., 1 Mar 2017, In: Organic Electronics. 42, p. 361-366 6 p.Research output: Contribution to journal › Article › Scientific › peer-review
34 Citations (Scopus) -
Feasibility for system integration in roll to roll processing
Jaakola, T. & et al., 2012.Research output: Contribution to conference › Conference article › Professional
-
Reverse-offset for roll-to-roll high-resolution printing
Sneck, A., Mäkelä, T. & Alastalo, A., 2018, In: Flexible and Printed Electronics. 3, 1, 014001.Research output: Contribution to journal › Article › Scientific › peer-review
15 Citations (Scopus) -
Development of a full roll-to-roll manufacturing process of through-substrate vias with stretchable substrates enabling double-sided wearable electronics
Jansson, E., Korhonen, A., Hietala, M. & Kololuoma, T., Dec 2020, In: International Journal of Advanced Manufacturing Technology. 111, 11-12, p. 3017-3027Research output: Contribution to journal › Article › Scientific › peer-review
Open Access9 Citations (Scopus) -
Printed large area OLED lighting
Tuomikoski, M., Kopola, P. & Maaninen, A., 2007, Conference Proceedings of Printed Electronics: IDTechEx 2007.Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
-
Molecularly imprinted polymer on roll-to-roll printed electrodes as a single use sensor for monitoring of cortisol in sweat
Gillan, L. & Jansson, E., 1 Jun 2022, In: Flexible and Printed Electronics. 7, 2, 11 p., 025014.Research output: Contribution to journal › Article › Scientific › peer-review
Open Access -
Roll-to-roll manufacturing of organic solar cells
Hast, J., Kopola, H., Tuomikoski, M., Kopola, P. & Maaninen, A., 2006.Research output: Contribution to conference › Conference article › Scientific
-
Roll-to-roll UV nanoimprinting using flexible polymer stamp
Mäkelä, T., Haatainen, T., Ahopelto, J. & Kawaguchi, Y., 2009.Research output: Contribution to conference › Conference Poster › Scientific › peer-review
-
Thermal Roll-to-Roll Imprinted Nanogratings on Plastic Film
Unno, N., Mäkelä, T. & Taniguchi, J., 2014, 58th International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication, EIPBN 2014.Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
Open Access -
Self-aligned metal electrodes in fully roll-to-roll processed organic transistors
Vilkman, M., Ruotsalainen, T., Solehmainen, K., Jansson, E. & Hiitola-Keinänen, J., 2016, In: Electronics. 5, 1, 10 p.Research output: Contribution to journal › Article › Scientific › peer-review
Open Access7 Citations (Scopus) -
Sustainable roll-to-roll manufactured multi-layer smart label
Hakola, L., Jansson, E., Futsch, R., Happonen, T., Thenot, V., Depres, G., Rougier, A. & Smolander, M., Dec 2021, In: The International Journal of Advanced Manufacturing Technology. 117, 9-10, p. 2921-2934 14 p.Research output: Contribution to journal › Article › Scientific › peer-review
Open AccessFile6 Citations (Scopus)24 Downloads (Pure) -
Online quality assurance of microchannels in roll-to-roll by optical coherence tomography
Lauri, J., Liedert, C., Liedert, R. & Fabritius, T., 2020, 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE Institute of Electrical and Electronic Engineers, 5 p. (IEEE International Instrumentation and Measurement Technology Conference, Vol. 2020).Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
3 Citations (Scopus) -
Roll-to-roll gravure-printed flexible perovskite solar cells using eco-friendly antisolvent bathing with wide processing window
Kim, Y. Y., Yang, T. Y., Suhonen, R., Kemppainen, A., Hwang, K., Jeon, N. J. & Seo, J., 13 Oct 2020, In: Nature Communications. 11, 1, 5146.Research output: Contribution to journal › Article › Scientific › peer-review
Open AccessFile92 Citations (Scopus)40 Downloads (Pure) -
Roll-to-roll gravure printing of organic photovoltaic modules-insulation of processing defects by an interfacial layer
Apilo, P., Hiltunen, J., Välimäki, M., Heinilehto, S., Sliz, R. & Hast, J., 2014, In: Progress in Photovoltaics. 23, 7, p. 918-928 10 p.Research output: Contribution to journal › Article › Scientific › peer-review
33 Citations (Scopus) -
Roll-to-roll paper sensors (ROPAS); Wireless communicating sensors on paper in the logistic chain
Rentrop, C., Rubingh, E., Lelieveld, R. & Sandberg, H., 2014, Proceedings of the 5th Electronics System-Integration Technology Conference, ESTC 2014. IEEE Institute of Electrical and Electronic EngineersResearch output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
2 Citations (Scopus) -
Thermal roll-to-roll imprinted nanogratings on plastic film
Unno, N., Mäkelä, T. & Taniguchi, J., 2014, In: Journal of Vacuum Science and Technology B: Nanotechnology and Microelectronics. 32, 6, 06FG03.Research output: Contribution to journal › Article › Scientific › peer-review
11 Citations (Scopus) -
Wavelength Scanning Interferometry for Topography of Microchannels at Roll-to-Roll Line with Optical Coherence Tomography
Lauri, J., Liedert, C. & Fabritius, T., 17 May 2021, 2021 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE Institute of Electrical and Electronic Engineers, 9460091. (IEEE International Instrumentation and Measurement Technology Conference).Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
-
Roll to roll nanoimprinting of conducting polyaniline using a novel imprinting device
Mäkelä, T., Haatainen, T., Majander, P. & Ahopelto, J., 2006, p. 1.Research output: Contribution to conference › Conference Abstract › Scientific › peer-review
Open Access -
Roll to roll fabrication technologies for optoelectronic and electronic devices and sensors
Maaninen, A., Tuomikoski, M., Kivimäki, L., Kololuoma, T., Välimäki, M., Leinonen, M. & Känsäkoski, M., 2005, Integrated Optics: Theory and Applications. p. 595604-1-10 (Proceedings of SPIE, Vol. 5956).Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
-
Creating functionality on paper using novel roll to roll surface treatment equipment: Case studies
Kunnari, V., Kokko, A., Erho, T., Kaljunen, T., Sipiläinen-Malm, T. & Keränen, M., 2011, PaperCon 2011. TAPPI Press, p. 528-540Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
-
Vapour-assisted roll-to-roll nanoimprinting of micropillars on nanocellulose films
Mäkelä, T., Hokkanen, A., Sneck, A., Ruotsalainen, T., Khakalo, A. & Tammelin, T., 15 Mar 2020, In: Microelectronic Engineering. 225, 111258.Research output: Contribution to journal › Article › Scientific › peer-review
Open Access3 Citations (Scopus) -
Fully roll-to-roll processed organic top gate transistors using a printable etchant for bottom electrode patterning
Vilkman, M., Hassinen, T., Keränen, M., Pretot, R., van der Schaaf, P., Ruotsalainen, T. & Sandberg, H. GO., 2015, In: Organic Electronics. 20, p. 8-14 7 p.Research output: Contribution to journal › Article › Scientific › peer-review
17 Citations (Scopus) -
Utilizing roll-to-roll techniques for manufacturing source-drain electrodes for all-polymer transistors
Mäkelä, T., Jussila, S., Kosonen, H., Bäcklund, T. G., Sandberg, H. G. O. & Stubb, H., 1 Sep 2005, In: Synthetic Metals. 153, 1-3, p. 285-288 4 p.Research output: Contribution to journal › Article › Scientific › peer-review
95 Citations (Scopus) -
Roll-to-roll compatible organic thin film transistor manufacturing technique by printing, lamination, and laser ablation
Hassinen, T., Ruotsalainen, T., Laakso, P., Penttilä, R. & Sandberg, H. G. O., 2014, In: Thin Solid Films. 571, p. 212-217Research output: Contribution to journal › Article › Scientific › peer-review
Open Access17 Citations (Scopus) -
Suitability of roll-to-roll reverse offset printing for mass production of millimeter-wave antennas: Progress report
Räisänen, A. V., Ala-Laurinaho, J., Asadchy, V., Diaz-Rubio, A., Khanal, S., Semkin, V., Tretyakov, S., Wang, X., Zheng, J., Alastalo, A., Mäkelä, T. & Sneck, A., 9 Jan 2016, Antennas & Propagation Conference (LAPC), 2016 Loughborough. IEEE Institute of Electrical and Electronic Engineers, p. 1-5Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
7 Citations (Scopus) -
Practical design guidelines for the development of high-precision roll-to-roll slot-die coating equipment and the process
Seong, J., Park, J., Lee, J., Ahn, B., Yeom, J. H., Kim, J., Hassinen, T., Rhee, S., Ko, S., Lee, D. & Shin, K-H., 2016, In: IEEE Transactions on Components, Packaging and Manufacturing Technology. 6, 11, p. 1677-1686Research output: Contribution to journal › Article › Scientific › peer-review
10 Citations (Scopus) -
Nanoparticle sintering methods and applications for printed electronics: Dissertation
Allen, M. L., 2011, Espoo: Aalto University. 93 p.Research output: Thesis › Dissertation › Collection of Articles
Open Access