Find Research outputs

Search results

• Conference article in proceedings

  Roll-to-roll paper sensors (ROPAS); Wireless communicating sensors on paper in the logistic chain

  Rentrop, C., Rubingh, E., Lelieveld, R. & Sandberg, H., 2014, Proceedings of the 5th Electronics System-Integration Technology Conference, ESTC 2014. IEEE Institute of Electrical and Electronic Engineers

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  2 Citations (Scopus)

• Roll-to-roll printed and flexible electronics for wearable, healthcare and IoT

  Kemppainen, A. & Rönkä, K., 2015, 2015 ICFPE: Program Book.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

• Roll-to-roll printed flexible Sensors

  Hast, J., Alastalo, A., Jansson, E., Kemppainen, A., Kololuoma, T., Tuomikoski, M. & Kopola, H., 2014, IMAPS Nordic Annual Conference 2014. Kutilainen, J. (ed.). Oulu: IMAPS Nordic, p. 93-105

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Roll-to-roll reverse offset printing of millimeter-wave transmission lines and antennas on flexible substrates

  Zheng, J., Ala-Laurinaho, J., Sneck, A., Mäkelä, T., Alastalo, A. & Räisänen, A. V., 2018, 12th European Conference on Antennas and Propagation, EuCAP 2018. Institution of Engineering and Technology IET, Vol. CP741. 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  1 Citation (Scopus)

• Screen Printed Vias for a Flexible Energy Harvesting and Storage Module

  Kujala, M., Kololuoma, T., Keskinen, J., Lupo, D., Mäntysalo, M. & Kraft, T., 20 Dec 2018, 2018 International Flexible Electronics Technology Conference, IFETC 2018. IEEE Institute of Electrical and Electronic Engineers, 6 p. 8583967

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  8 Citations (Scopus)

• Self-feeding microfluidic structures on silicon and glass

  Kolari, K., Hokkanen, A., Koponen, J. & Stuns, I., 2005, Proceedings Volume 5839, Bioengineered and Bioinspires Systems II. International Society for Optics and Photonics SPIE, p. 323-331 (Proceedings of SPIE, Vol. 5839).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  5 Citations (Scopus)

• Sintering of printed nanoparticle structures using laser treatment

  Laakso, P., Ruotsalainen, S., Halonen, E., Mäntysalo, M. & Kemppainen, A., 2009, Proceedings of ICALEO 2009: 28th International Congress on Applications of Lasers and Electro-Optics. Orlando: Laser Institute of America, p. 1360-1366

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  22 Citations (Scopus)

• Stretchable LED matrix display

  Huttunen, A., Happonen, T., Korhonen, A., Väisänen, K-L., Amin, B., Tuomikoski, M. & Alajoki, T., Sep 2020, 2020 IEEE 8th Electronics System-Integration Technology Conference (ESTC). IEEE Institute of Electrical and Electronic Engineers, 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Studies on applicability of reverse offset in printing millimeter-wave antennas on flexible substrates

  Zheng, J., Ala-Laurinaho, J., Alastalo, A., Mäkelä, T., Sneck, A. & Räisänen, A. V., 6 Jul 2017, 10th Global Symposium on Millimeter-Waves, GSMM 2017. So, K. K. & Chan, K. F. (eds.). IEEE Institute of Electrical and Electronic Engineers, p. 42-43 7970292

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  2 Citations (Scopus)

• Study of population dynamics of E. Coli in a microfluidic landscape incorporating a toxic gradient

  Kolari, K., Mojzita, D., Stuns, I., Penttilä, M. & Hjort, K., 2012, Proceedings MME 2012: Micromechanics and Microsystems Europe Workshop 2012. 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  Open Access

• Substrate integrated waveguide fed LTCC microstrip patch antenna for 94 GHz applications

  Bunea, A. C., Neculoiu, D., Lahti, M. & Vähä-Heikkilä, T., 17 Dec 2015, 2015 International Semiconductor Conference (CAS). IEEE Institute of Electrical and Electronic Engineers, p. 127-130

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Substrates based on cellulose nanofibrils for printed electronics and optics

  Torvinen, K., Makela, T., Khakalo, A. & Tammelin, T., Jun 2019, International Conference on Nanotechnology for Renewable Materials 2019. TAPPI Press, p. 279-289 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Suitability of roll-to-roll reverse offset printing for mass production of millimeter-wave antennas: Progress report

  Räisänen, A. V., Ala-Laurinaho, J., Asadchy, V., Diaz-Rubio, A., Khanal, S., Semkin, V., Tretyakov, S., Wang, X., Zheng, J., Alastalo, A., Mäkelä, T. & Sneck, A., 9 Jan 2016, Antennas & Propagation Conference (LAPC), 2016 Loughborough. IEEE Institute of Electrical and Electronic Engineers, p. 1-5

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  6 Citations (Scopus)

• Sustainable materials and processes for electronics, photonics and diagnostics

  Hakola, L., Immonen, K., Sokka, L., Välimäki, M., Smolander, M., Mantysalo, M., Tanninen, P., Lyytikäinen, J., Leminen, V., Naji Nassajfar, M., Horttanainen, M. & Venetjoki, P., Sep 2020, Proceedings of the Electronics Goes Green 2020+. Stuttgart: Fraunhofer Verlag, p. 45-52

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Sustainable substrate for printed electronics

  Hakola, L. & Jansson, E., 2019, Printing for Fabrication 2019: Materials, Applications, and Process - Technical Program and Proceedings. The Society for Imaging Science and Technology, IS&T, p. 132-137 6 p. (International Conference on Digital Printing Technologies, Vol. 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Technologies, innovations and new business opportunities in printed intelligence

  Kopola, H., Hurme, E., Kuusisto, J-M., Smolander, M., Tuomikoski, M., Kololuoma, T., Hast, J., Känsäkoski, M., Alastalo, A., Kemppainen, A., Södergård, C., Qvintus-Leino, P. & Maaninen, A., 2007, Proceedings on CD.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Testing mineral aggregates of asphalt: Use of test slab method

  Vuorinen, J., 2001, Proceedings of Aggregate 2001 - Environment and Economy. Kuula-Väisänen, P. & Uusinoka, R. (eds.). Tampere: Tampereen teknillinen korkeakoulu , p. 269-273 (Tampereen teknillinen korkeakoulu: Rakennusgeologia. Raportti; No. 50).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

• Thermal Roll-to-Roll Imprinted Nanogratings on Plastic Film

  Unno, N., Mäkelä, T. & Taniguchi, J., 2014, 58th International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication, EIPBN 2014.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  Open Access

• Towards Roll-to-roll fabricated integrated modules

  Hast, J., Kololuoma, T., Kopola, H., Maaninen, A., Petäjä, J., Sandberg, H. & Tuomikoski, M., 2006, Proceedings of Printed Electronics Europe 06. 19.-21. 4.. Canbridge

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

• Towards roll-to-roll fabrication of electronics, optics and optoelectronics for smart and intelligent packaging

  Kololuoma, T., Tuomikoski, M., Mäkelä, T., Heilmann, J., Haring, T., Kallioinen, J., Hagberg, J., Kettunen, I. & Kopola, H., 2004, Emerging Optoelectronic Applications. International Society for Optics and Photonics SPIE, p. 77-85 (Proceedings of SPIE, Vol. 5363).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  41 Citations (Scopus)

• Towards roll-to-roll fabrication of OLED’s

  Maaninen, A. & Tuomikoski, M., 2005, Proceedings of the Plastic Electronics 2005.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Transformation of non-standard nuclear I&C logic drawings to formal verification models

  Pakonen, A., Biswas, P. & Papakonstantinou, N., 18 Oct 2020, IECON 2020 : 46th Annual Conference of the IEEE Industrial Electronics Society. IEEE Institute of Electrical and Electronic Engineers, p. 697-704

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  Open Access

  File
  62 Downloads (Pure)

• Wavelength Scanning Interferometry for Topography of Microchannels at Roll-to-Roll Line with Optical Coherence Tomography

  Lauri, J., Liedert, C. & Fabritius, T., 17 May 2021, 2021 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE Institute of Electrical and Electronic Engineers, 9460091. (IEEE International Instrumentation and Measurement Technology Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Wideband stacked patch antenna array on LTCC for W-band

  Lamminen, A. & Säily, J., 2011, Proceedings: 5th European Conference on Antennas and Propagation, EuCAP 2011. IEEE Institute of Electrical and Electronic Engineers, p. 2962-2966

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  20 Citations (Scopus)
• Conference article

  Advances in the cellulose nanofibril (CNF) technologies and applications

  Kangas, H., Pere, J. & Tammelin, T., 1 Jan 2017.

  Research output: Contribution to conference › Conference article › Scientific

• All-printable electronic devices: Towards high volume manufacturing methods

  Mäkelä, T., 2008.

  Research output: Contribution to conference › Conference article › Scientific

• Ceramic systems in package for RF and microwave

  Bartnitzek, T., Schönlinner, B., Gautier, W., Cheng, S., Rydberg, A., Purtova, T., Qu, G., Feger, T., Janes, J., Vähä-Heikkilä, T. & Afshin, Z., 2008.

  Research output: Contribution to conference › Conference article › Scientific › peer-review

• Continuous roll-to-roll method to produce fluidics channels on plastic web

  Mäkelä, T., Haatainen, T., Majander, P., Ahopelto, J., Larsen, A-V. & Kristensen, A., 2008.

  Research output: Contribution to conference › Conference article › Scientific › peer-review

• Design and Processing of 60 GHz Antennas on Low Temperature Co-fired Ceramic (LTCC) Substrates

  Lamminen, A., Säily, J. & Vimpari, A., 2006. 6 p.

  Research output: Contribution to conference › Conference article › Scientific › peer-review

  Open Access

• Digital transformation and trillion sensors in paper business

  Kemppainen, A., 2016.

  Research output: Contribution to conference › Conference article › Scientific

• Disposable roll-to-roll hot embossed electrophoresis chip applied for detection of antibiotic resistance genemecA in bacteria

  Liedert, R., Amundsen, L., Hokkanen, A., Mäki, M., Scherer, J. R., Mathies, R. A., Hakalahti, L., Nevanen, T., Siitari, H. & Söderlund, H., 2011.

  Research output: Contribution to conference › Conference article › Scientific

• Exploring materials and technologies for printable optics and electronics utilised in intelligent packaging

  Kopola, H., Kololuoma, T., Mäkelä, T., Linna, H., Haring, T., Hagberg, J., Kallioinen, J. & Kettunen, I., 2003, p. 103-125.

  Research output: Contribution to conference › Conference article › Scientific

  1 Citation (Scopus)

• Fabrication of Plastic Microfluidic Channels using Roll to Roll Hot Em

  Mäkelä, T., Haatainen, T., Majander, P. & Ahopelto, J., 2006.

  Research output: Contribution to conference › Conference article › Scientific › peer-review

• Feasibility for system integration in roll to roll processing

  Jaakola, T. & et al., 2012.

  Research output: Contribution to conference › Conference article › Professional

• Flexible bio-based pigment nanocellulose substrate for printed electronics

  Torvinen, K., Sievänen, J., Mattila, T., Alastalo, A. & Hellen, E., 2012.

  Research output: Contribution to conference › Conference article › Scientific

• Flexible bio-based pigment-nanocellulose substrate for printed electronics with good thermal tolerance

  Torvinen, K., Hassinen, T., Sievänen, J., Majumdar, H., Mattila, T. & Hellén, E., 2013.

  Research output: Contribution to conference › Conference article › Scientific

• Image quality measurements in the quality control of printed electronics

  Heilmann, J., Juhola, H., Linna, H. & Hakola, L., 2003. 8 p.

  Research output: Contribution to conference › Conference article › Scientific

• Industrial-scale inkjet printing of functional inks for diagnostics and electronics: Invited talk

  Hakola, L., 2012.

  Research output: Contribution to conference › Conference article › Scientific

• Integrated chip for liquid chromatography separation and atmospheric pressure ionization for mass spectrometry

  Saarela, V., Haapala, M., Pól, J., Kolari, K., Kotiaho, T., Kostiainen, R. & Franssila, S., 2009.

  Research output: Contribution to conference › Conference article › Scientific › peer-review

• Large area printed smart systems: From components to systems

  Kemppainen, A., Kopola, H., Korhonen, R., Alastalo, A., Maaninen, A., Tuomikoski, M., Hast, J. & Laakso, P., 2009.

  Research output: Contribution to conference › Conference article › Scientific

• Low-cost microfluidics and mobile diagnostics

  Liedert, C., Kurkinen, M., Mäkinen, J-T., Takalo-Mattila, J., Kokkonen, A. & Hakalahti, L., 2016.

  Research output: Contribution to conference › Conference article › Scientific

• Metallic nanoparticles in a polymeric matrix: Electrical impedance switching and negative differential resistance

  Vilkman, M., Baral, J., Laiho, A., Nuopponen, M., Hassinen, T., Ras, R., Sandberg, H. G. O., Tenhu, H., Österbacka, R. & Ikkala, O., 2007.

  Research output: Contribution to conference › Conference article › Scientific

• Microstrip parasitic patch array with substrate integrated waveguide feed for 35 GHz applications

  Bunea, A-C., Neculoiu, D., Lahti, M. & Vähä-Heikkilä, T., 2013.

  Research output: Contribution to conference › Conference article › Scientific › peer-review

• Modelling web behaviour in printing press and in printed electronics

  Parola, M. & Sorvari, J., 2013.

  Research output: Contribution to conference › Conference article › Professional

• New product concepts for safety and diagnostics based on printing

  Hakola, L., 2011.

  Research output: Contribution to conference › Conference article › Scientific

• Printed diagnostics: the lab of the future will be flat

  Kololuoma, T. & Liedert, R., 2014.

  Research output: Contribution to conference › Conference article › Scientific

• R2R Electrical Sintering of Nanoparticle Structures

  Allen, M., Alastalo, A., Aronniemi, M., Mattila, T., Sääskilahti, K., Suhonen, M. & Seppä, H., 2008, p. 291-296. 6 p.

  Research output: Contribution to conference › Conference article › Scientific › peer-review

• Roll to roll manufacturing of flexible hybrid systems

  Kemppainen, A. & Rönkä, K., 2016.

  Research output: Contribution to conference › Conference article › Professional

• Roll-to-roll manufacturing of low cost diagnostics: examples of optical and microfluidic structures

  Känsäkoski, M., Liebert, R., Huttunen, O-H., Hiitola-Keinänen, J., Uusitalo, S., Hakalahti, L., Kurkinen, M., Kivimäki, L., Hast, J., Kololuoma, T., Maaninen, A. & Kopola, H., 2008.

  Research output: Contribution to conference › Conference article › Scientific

• Roll-to-roll manufacturing of organic solar cells

  Hast, J., Kopola, H., Tuomikoski, M., Kopola, P. & Maaninen, A., 2006.

  Research output: Contribution to conference › Conference article › Scientific