Find Research outputs

Search results

• Roll-to-roll compatible OTFT manufacturing technique by lamination

  Hassinen, T. & Ruotsalainen, T., 2012, 8th International Thin-Film Transistor Conference, ITC 2012, 30 - 31 January 2012, Lisbon, Portugal - Book of abstracts. Universidade Nova de Lisboa, 109

  Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Scientific

• Toward roll-to-roll printed power sources and control electronics

  Hast, J., Solehmainen, K. & Vilkman, M., 2010, In: Photonics Spectra. 44, 6

  Research output: Contribution to journal › Article › Scientific › peer-review

• Towards roll to roll manufacturing of flexible OLED devices

  Maaninen, A., Tuomikoski, M., Välimäki, M., Maaninen, T. & Kopola, H., 2007.

  Research output: Contribution to conference › Conference Abstract › Scientific

• Roll-to-roll printed and flexible electronics for wearable, healthcare and IoT

  Kemppainen, A. & Rönkä, K., 2015, 2015 ICFPE: Program Book.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

• Roll-to-Roll printed transparent OLEDs

  Tuomikoski, M., Suhonen, R. & Hast, J., 2012, Proceedings: 8th International Conference on Organic Electronics, ICOE 2012.

  Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Scientific

• Roll-to-Roll manufacturing of printed OLEDs

  Hast, J., Tuomikoski, M., Suhonen, R., Väisänen, K-L., Välimäki, M., Maaninen, T., Apilo, P., Alastalo, A. & Maaninen, A., 2013, In: SID International Symposium: Digest of Technical Papers. 44, 1, p. 192-195 3 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  31 Citations (Scopus)

• Roll-to-roll manufacturing of low cost diagnostics: examples of optical and microfluidic structures

  Känsäkoski, M., Liebert, R., Huttunen, O-H., Hiitola-Keinänen, J., Uusitalo, S., Hakalahti, L., Kurkinen, M., Kivimäki, L., Hast, J., Kololuoma, T., Maaninen, A. & Kopola, H., 2008.

  Research output: Contribution to conference › Conference article › Scientific

• All-optical difference engine for in-process defect inspection for roll-to-roll printed electronics

  Feng, X., Su, R., Happonen, T., Liu, J. & Leach, R., 7 Mar 2019, Tenth International Symposium on Precision Engineering Measurements and Instrumentation. Tan, J. & Lin, J. (eds.). International Society for Optics and Photonics SPIE, p. 1105308-1-1105308-8 8 p. 1105308. (Proceedings of SPIE, Vol. 11053).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Verification of roll-to-roll printing quality for printed wiring backplanes with automated roll-to-roll electrical test equipment

  Happonen, T., Kokko, T., Juntunen, E. & Rönkä, K., 2018, LOPEC Conference Proceedings.

  Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Professional

• Roll-to-Roll Manufacturing of Printed Organic Photovoltaics

  Jansson, E., Kololuoma, T., Vilkman, M., Väisänen, K-L., Ylikunnari, M. & Välimäki, M., 2018.

  Research output: Contribution to conference › Conference Abstract › Scientific

• Roll-to-roll functional testing of printed conductors and organic light emitting devices

  Happonen, T., Tuomikoski, M., Kokko, T. & Rönkä, K., 29 Nov 2018, 2018 7th Electronic System-Integration Technology Conference (ESTC). IEEE Institute of Electrical and Electronic Engineers, p. 1-5 5 p. 8546333

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  2 Citations (Scopus)

• Roll-To-Roll Screen-Printed Silver Conductors on a Polydimethyl Siloxane Substrate for Stretchable Electronics

  Huttunen, O. H., Happonen, T., Hiitola-Keinänen, J., Korhonen, P., Ollila, J. & Hiltunen, J., 30 Oct 2019, In: Industrial and Engineering Chemistry Research. 58, 43, p. 19909-19916 8 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  11 Citations (Scopus)

• Roll-to-roll manufacturing technologies of OLEDs for signage and lighting

  Suhonen, R., Tuomikoski, M., Maaninen, A. & Kopola, H., 2005, Conference Proceedings of Printed Electronics USA 2005.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Novel substrates for applications of roll-to-roll printed and hybrid functionalities

  Hast, J., Tuomikoski, M., Hiltunen, J., Välimäki, M., Huttunen, O-H., Hiitola-Keinänen, J., Jurvansuu, M. & Pöhler, T., 27 Nov 2018.

  Research output: Contribution to conference › Other conference contribution › Scientific › peer-review

• Capability of Realization of Roll-to-Roll Printed MEMS Fabry-Pérot Display Pixels

  Lo, C., Huttunen, O-H., Petäjä, J., Hast, J., Maaninen, A., Kopola, H., Fujita, H. & Toshiyoshi, H., 2007, Proceedings of the 2nd International Student Conference "Printing Future Days 2007". p. 19-24

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  Open Access

• Roll-to-roll printing of organic photovaltaic cells and modules: Dissertation

  Apilo, P., 2015, Espoo: VTT Technical Research Centre of Finland. 154 p.

  Research output: Thesis › Dissertation › Collection of Articles

  Open Access

• Roll to roll manufacturing of flexible hybrid systems

  Kemppainen, A. & Rönkä, K., 2016.

  Research output: Contribution to conference › Conference article › Professional

• Towards Roll-to-roll fabricated integrated modules

  Hast, J., Kololuoma, T., Kopola, H., Maaninen, A., Petäjä, J., Sandberg, H. & Tuomikoski, M., 2006, Proceedings of Printed Electronics Europe 06. 19.-21. 4.. Canbridge

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

• Quality assurance for rotary screen printed wiring backplanes with automated roll-to-roll electrical test equipment

  Happonen, T., Kokko, T., Juntunen, E. & Rönkä, K., Apr 2019, In: Flexible and Printed Electronics. 4, 2, 025002.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  2 Citations (Scopus)

• Towards roll-to-roll fabrication of OLED’s

  Maaninen, A. & Tuomikoski, M., 2005, Proceedings of the Plastic Electronics 2005.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Towards roll-to-roll fabrication of electronics, optics and optoelectronics for smart and intelligent packaging

  Kololuoma, T., Tuomikoski, M., Mäkelä, T., Heilmann, J., Haring, T., Kallioinen, J., Hagberg, J., Kettunen, I. & Kopola, H., 2004, Emerging Optoelectronic Applications. International Society for Optics and Photonics SPIE, p. 77-85 (Proceedings of SPIE, Vol. 5363).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  38 Citations (Scopus)

• Roll-to-roll printed and assembled large area LED lighting element

  Keränen, K., Korhonen, P., Rekilä, J., Tapaninen, O., Happonen, T., Makkonen, P. & Rönkä, K., 2015, In: The International Journal of Advanced Manufacturing Technology. 81, 1-4, p. 529-536

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  33 Citations (Scopus)

• Feasibility for system integration in roll to roll processing

  Jaakola, T. & et al., 2012.

  Research output: Contribution to conference › Conference article › Professional

• Roll-to-roll manufacturing of organic photovoltaic modules

  Tuomikoski, M., Kopola, P., Jin, H., Ylikunnari, M., Hiitola-Keinänen, J., Välimäki, M., Aikio, M. & Hast, J., 2009, 2009 European Microelectronics and Packaging Conference. IEEE Institute of Electrical and Electronic Engineers, 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  5 Citations (Scopus)

• Fully solution-processed organic thin-film transistors by consecutive roll-to-roll gravure printing

  Kim, J., Hassinen, T., Lee, W. H. & Ko, S., 1 Mar 2017, In: Organic Electronics. 42, p. 361-366 6 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  29 Citations (Scopus)

• Reverse-offset for roll-to-roll high-resolution printing

  Sneck, A., Mäkelä, T. & Alastalo, A., 2018, In: Flexible and Printed Electronics. 3, 1, 014001.

  Research output: Contribution to journal › Article › Scientific › peer-review
  12 Citations (Scopus)

• Roll-to-roll UV nanoimprinting using flexible polymer stamp

  Mäkelä, T., Haatainen, T., Ahopelto, J. & Kawaguchi, Y., 2009.

  Research output: Contribution to conference › Conference Poster › Scientific › peer-review

• Roll-to-roll manufacturing of organic solar cells

  Hast, J., Kopola, H., Tuomikoski, M., Kopola, P. & Maaninen, A., 2006.

  Research output: Contribution to conference › Conference article › Scientific

• Roll to roll fabrication technologies for optoelectronic and electronic devices and sensors

  Maaninen, A., Tuomikoski, M., Kivimäki, L., Kololuoma, T., Välimäki, M., Leinonen, M. & Känsäkoski, M., 2005, Integrated Optics: Theory and Applications. p. 595604-1-10 (Proceedings of SPIE, Vol. 5956).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Development of a full roll-to-roll manufacturing process of through-substrate vias with stretchable substrates enabling double-sided wearable electronics

  Jansson, E., Korhonen, A., Hietala, M. & Kololuoma, T., Dec 2020, In: International Journal of Advanced Manufacturing Technology. 111, 11-12, p. 3017-3027

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  2 Citations (Scopus)

• Thermal Roll-to-Roll Imprinted Nanogratings on Plastic Film

  Unno, N., Mäkelä, T. & Taniguchi, J., 2014, 58th International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication, EIPBN 2014.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  Open Access

• Printed large area OLED lighting

  Tuomikoski, M., Kopola, P. & Maaninen, A., 2007, Conference Proceedings of Printed Electronics: IDTechEx 2007.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Self-aligned metal electrodes in fully roll-to-roll processed organic transistors

  Vilkman, M., Ruotsalainen, T., Solehmainen, K., Jansson, E. & Hiitola-Keinänen, J., 2016, In: Electronics. 5, 1, 10 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  6 Citations (Scopus)

• Online quality assurance of microchannels in roll-to-roll by optical coherence tomography

  Lauri, J., Liedert, C., Liedert, R. & Fabritius, T., 2020, 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE Institute of Electrical and Electronic Engineers, 5 p. (IEEE International Instrumentation and Measurement Technology Conference, Vol. 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  1 Citation (Scopus)

• R2R-printed inverted OPV modules: Towards arbitrary patterned designs

  Välimäki, M., Apilo, P., Po, R., Jansson, E., Bernardi, A., Ylikunnari, M., Vilkman, M., Corso, G., Puustinen, J., Tuominen, J. & Hast, J., 2015, In: Nanoscale. 7, 21, p. 9570-9580

  Research output: Contribution to journal › Article › Scientific › peer-review
  41 Citations (Scopus)

• Roll-to-roll pilot nanoimprinting process for backlight devices

  Mäkelä, T. & Haatainen, T., 2012, In: Microelectronic Engineering. 97, p. 89-91 3 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  18 Citations (Scopus)

• Roll-to-roll gravure-printed flexible perovskite solar cells using eco-friendly antisolvent bathing with wide processing window

  Kim, Y. Y., Yang, T. Y., Suhonen, R., Kemppainen, A., Hwang, K., Jeon, N. J. & Seo, J., 13 Oct 2020, In: Nature Communications. 11, 1, 5146.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  20 Citations (Scopus)

  18 Downloads (Pure)

• Sustainable roll-to-roll manufactured multi-layer smart label

  Hakola, L., Jansson, E., Futsch, R., Happonen, T., Thenot, V., Depres, G., Rougier, A. & Smolander, M., 19 Aug 2021, (E-pub ahead of print) In: The International Journal of Advanced Manufacturing Technology.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

• Thermal roll-to-roll imprinted nanogratings on plastic film

  Unno, N., Mäkelä, T. & Taniguchi, J., 2014, In: Journal of Vacuum Science and Technology B: Nanotechnology and Microelectronics. 32, 6

  Research output: Contribution to journal › Article › Scientific › peer-review
  9 Citations (Scopus)

• Pilot production of photonic devices by roll-to-roll nanoimprinting

  Mäkelä, T., Haatainen, T. & Ahopelto, J., 2012, In: Journal of Photopolymer Science and Technology. 25, 2, p. 227-228 1 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  2 Citations (Scopus)

• Roll to roll nanoimprinting of conducting polyaniline using a novel imprinting device

  Mäkelä, T., Haatainen, T., Majander, P. & Ahopelto, J., 2006, p. 1.

  Research output: Contribution to conference › Conference Abstract › Scientific › peer-review

  Open Access

• Roll-to-roll gravure printing of organic photovoltaic modules-insulation of processing defects by an interfacial layer

  Apilo, P., Hiltunen, J., Välimäki, M., Heinilehto, S., Sliz, R. & Hast, J., 2014, In: Progress in Photovoltaics. 23, 7, p. 918-928 10 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  29 Citations (Scopus)

• Creating functionality on paper using novel roll to roll surface treatment equipment: Case studies

  Kunnari, V., Kokko, A., Erho, T., Kaljunen, T., Sipiläinen-Malm, T. & Keränen, M., 2011, PaperCon 2011. TAPPI Press, p. 528-540

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Surface modification of CNF films by roll-to-roll nanoimprinting and plasma deposition

  Khakalo, A., Mäkelä, T., Orelma, H. & Tammelin, T., 2019, 257th ACS National Meeting & Exposition: Abstracts of Papers. American Chemical Society ACS, 1 p. CELL 512. (Abstracts of Papers: The American Chemical Society).

  Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Scientific

• Vapour-assisted roll-to-roll nanoimprinting of micropillars on nanocellulose films

  Mäkelä, T., Hokkanen, A., Sneck, A., Ruotsalainen, T., Khakalo, A. & Tammelin, T., 15 Mar 2020, In: Microelectronic Engineering. 225, 111258.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  2 Citations (Scopus)

• Wavelength Scanning Interferometry for Topography of Microchannels at Roll-to-Roll Line with Optical Coherence Tomography

  Lauri, J., Liedert, C. & Fabritius, T., 17 May 2021, I2MTC 2021 - IEEE International Instrumentation and Measurement Technology Conference, Proceedings. IEEE Institute of Electrical and Electronic Engineers, 9460091. (Conference Record - IEEE Instrumentation and Measurement Technology Conference, Vol. 2021-May).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Roll-to-roll paper sensors (ROPAS); Wireless communicating sensors on paper in the logistic chain

  Rentrop, C., Rubingh, E., Lelieveld, R. & Sandberg, H., 2014, Proceedings of the 5th Electronics System-Integration Technology Conference, ESTC 2014. IEEE Institute of Electrical and Electronic Engineers

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  2 Citations (Scopus)

• Fully roll-to-roll processed organic top gate transistors using a printable etchant for bottom electrode patterning

  Vilkman, M., Hassinen, T., Keränen, M., Pretot, R., van der Schaaf, P., Ruotsalainen, T. & Sandberg, H. GO., 2015, In: Organic Electronics. 20, p. 8-14 7 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  15 Citations (Scopus)

• Utilizing roll-to-roll techniques for manufacturing source-drain electrodes for all-polymer transistors

  Mäkelä, T., Jussila, S., Kosonen, H., Bäcklund, T. G., Sandberg, H. G. O. & Stubb, H., 1 Sep 2005, In: Synthetic Metals. 153, 1-3, p. 285-288 4 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  93 Citations (Scopus)

• Roll-to-roll compatible organic thin film transistor manufacturing technique by printing, lamination, and laser ablation

  Hassinen, T., Ruotsalainen, T., Laakso, P., Penttilä, R. & Sandberg, H. GO., 2014, In: Thin Solid Films. 571, p. 212-217 6 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  15 Citations (Scopus)