Find Research outputs

Search results

• 2014

  Printed low-voltage programmable write-once-read-many-memories

  Leppäniemi, J., Fukuda, N., Alastalo, A., Mattila, T., Eiroma, K. & Kololuoma, T., 2014, Proceedings of the 5th Electronics System-Integration Technology Conference, ESTC 2014. IEEE Institute of Electrical and Electronic Engineers

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  1 Citation (Scopus)

• Printed polymer and carbon nanotube thin film transistors with high-k barium titanate insulator

  Hassinen, T., Ahn, B. & Ko, S., 2014, In: Japanese Journal of Applied Physics. 53, 5S3, 5 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  2 Citations (Scopus)

• Printed supercapacitors: Manufacturing, electrical properties and life-time

  Keskinen, J., von Hertzen, L., Bergelin, M., Johansson, M., Flyktman, T. & Jansson, E., 2014.

  Research output: Contribution to conference › Other conference contribution › Scientific

• Printed temperature and moisture sensors

  Voutilainen, J. V., Happonen, T., Häkkinen, J. & Fabritius, T., 1 Jan 2014, IMAPS Nordic Annual Conference 2014. Kutilainen, J. (ed.). IMAPS Nordic, p. 109-110

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Rapid low-temperature processing of metal-oxide thin film transistors with combined far ultraviolet and thermal annealing

  Leppäniemi, J., Ojanperä, K., Kololuoma, T., Huttunen, O-H., Dahl, J., Tuominen, M., Laukkanen, P., Majumdar, H. & Alastalo, A., 2014, In: Applied Physics Letters. 105, 11, 113514.

  Research output: Contribution to journal › Article › Scientific › peer-review
  43 Citations (Scopus)

• Reliability study on adhesive interconnections in flex-to-flex printed electronics applications under environmental stresses

  Happonen, T., Voutilainen, J. V. & Fabritius, T., 1 Dec 2014, In: IEEE Transactions on Device and Materials Reliability. 14, 4, p. 1005-1012 8 p., 6899652.

  Research output: Contribution to journal › Article › Scientific › peer-review
  16 Citations (Scopus)

• Roll-to-roll compatible organic thin film transistor manufacturing technique by printing, lamination, and laser ablation

  Hassinen, T., Ruotsalainen, T., Laakso, P., Penttilä, R. & Sandberg, H. G. O., 2014, In: Thin Solid Films. 571, p. 212-217

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  17 Citations (Scopus)

• Roll-to-roll gravure printing of organic photovoltaic modules-insulation of processing defects by an interfacial layer

  Apilo, P., Hiltunen, J., Välimäki, M., Heinilehto, S., Sliz, R. & Hast, J., 2014, In: Progress in Photovoltaics. 23, 7, p. 918-928 10 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  33 Citations (Scopus)

• Roll-to-roll paper sensors (ROPAS); Wireless communicating sensors on paper in the logistic chain

  Rentrop, C., Rubingh, E., Lelieveld, R. & Sandberg, H., 2014, Proceedings of the 5th Electronics System-Integration Technology Conference, ESTC 2014. IEEE Institute of Electrical and Electronic Engineers

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  2 Citations (Scopus)

• Roll-to-roll printed flexible Sensors

  Hast, J., Alastalo, A., Jansson, E., Kemppainen, A., Kololuoma, T., Tuomikoski, M. & Kopola, H., 2014, IMAPS Nordic Annual Conference 2014. Kutilainen, J. (ed.). Oulu: IMAPS Nordic, p. 93-105

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Scale-up of manufacturing of printed enzyme electrodes for enzymatic power source applications

  Tuurala, S., Kaukoniemi, O-V., von Hertzen, L., Uotila, J., Vaari, A., Bergelin, M., Sjöberg, P., Eriksson, J-E. & Smolander, M., 2014, In: Journal of Applied Electrochemistry. 44, 7, p. 881-892 12 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  5 Citations (Scopus)

• Thermal roll-to-roll imprinted nanogratings on plastic film

  Unno, N., Mäkelä, T. & Taniguchi, J., 2014, In: Journal of Vacuum Science and Technology B: Nanotechnology and Microelectronics. 32, 6, 06FG03.

  Research output: Contribution to journal › Article › Scientific › peer-review
  11 Citations (Scopus)

• Thermal Roll-to-Roll Imprinted Nanogratings on Plastic Film

  Unno, N., Mäkelä, T. & Taniguchi, J., 2014, 58th International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication, EIPBN 2014.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  Open Access
• 2013

  Additions and corrections for Journal of Materials Chemistry published in 2013: Inkjet-printed gas sensors: Metal decorated WO₃nanoparticles and their gas sensing properties

  Kukkola, J., Mohl, M., Leino, A. R., Tóth, G., Wu, M. C., Shchukarev, A., Popov, A., Mikkola, J. P., Lauri, J., Riihimäki, M., Lappalainen, J., Jantunen, H. & Kordás, K., 2013, In: Journal of Materials Chemistry A: Materials for Energy and Sustainability. 2013, 48, p. 15559-15564

  Research output: Contribution to journal › Other journal contribution › Scientific

• Application of paper-supported printed gold electrodes for impedimetric immunosensor development

  Ihalainen, P., Majumdar, H., Viitala, T., Törngren, B., Näreoja, T., Määttänen, A., Sarfraz, J., Härmä, H., Yliperttula, M., Österbacka, R. & Peltonen, J., 2013, In: Biosensors. 3, 1, p. 1-17 16 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  28 Citations (Scopus)

• Development of procedures for programmable proximity aperture lithography

  Whitlow, H. J., Gorelick, S., Puttaraksa, N., Napari, M., Hokkanen, M. J. & Norarat, R., 2013, In: Nuclear Instruments and Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 306, p. 307-310

  Research output: Contribution to journal › Article › Scientific › peer-review

• Effect of rolling creep on web transport

  Sorvari, J. & Parola, M., 2013.

  Research output: Contribution to conference › Other conference contribution › Scientific

• Filler-nanocellulose substrate for printed electronics: Experiments and model approach to structure and conductivity

  Penttilä, A., Sievänen, J., Torvinen, K., Ojanperä, K. & Ketoja, J., 2013, In: Cellulose. 20, 3, p. 1413-1424 12 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  37 Citations (Scopus)

• Flexible bio-based pigment-nanocellulose substrate for printed electronics with good thermal tolerance

  Torvinen, K., Hassinen, T., Sievänen, J., Majumdar, H., Mattila, T. & Hellén, E., 2013.

  Research output: Contribution to conference › Conference article › Scientific

• Hybrid in-mould integration

  Alajoki, T., Koponen, M., Huttunen, A., Tuomikoski, M., Heikkinen, M., Keränen, A., Keränen, K., Mäkinen, J-T., Jaakola, T., Aikio, J. & Rönkä, K., 2013, 46th International Symposium on Microelectronics, IMAPS 2013. Curran Associates Inc., p. 188-193

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Hydrophobin: Fluorosurfactant-like properties without fluorine

  Milani, R., Monogioudi, E., Baldrighi, M., Cavallo, G., Arima, V., Marra, L., Zizzari, A., Rinaldi, R., Linder, M., Resnati, G. & Metrangolo, P., 2013, In: Soft Matter. 9, 28, p. 6505-6514 9 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  21 Citations (Scopus)

• Modeling the behavior of printed passive components on flexible substrate under environmental loadings

  Happonen, T., Voutilainen, J. V. & Häkkinen, J., 1 Apr 2013, In: Nanoscience and Nanotechnology Letters. 5, 4, p. 505-509 5 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  3 Citations (Scopus)

• Modelling web behaviour in printing press and in printed electronics

  Parola, M. & Sorvari, J., 2013.

  Research output: Contribution to conference › Conference article › Professional

• Nondestructive inspection of buried channels and cavities in silicon

  Kassamakov, I., Grigoras, K., Heikkinen, V., Hanhijärvi, K., Aaltonen, J., Franssila, S. & Haeggstrom, E., 2013, In: Journal of Microelectromechanical Systems. 22, 2, p. 438-442 5 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  7 Citations (Scopus)

• On the development of nanofibrillated cellulose templates for functional materials

  Peresin, S., Tammelin, T., Vartiainen, J., Johansson, L-S. & Österberg, M., 2013.

  Research output: Contribution to conference › Conference Abstract › Scientific

  Open Access