Find Research outputs

Search results

• Evaluation of printed electronics manufacturing line with sensor platform application

  Halonen, E., Kaija, K., Mäntysalo, M., Kemppainen, A., Osterbacka, R. & Björklund, N., 2009, 2009 European Microelectronics and Packaging Conference. IEEE Institute of Electrical and Electronic Engineers

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  10 Citations (Scopus)

• Exploring materials and technologies for printable optics and electronics utilised in intelligent packaging

  Kopola, H., Kololuoma, T., Mäkelä, T., Linna, H., Haring, T., Hagberg, J., Kallioinen, J. & Kettunen, I., 2003, p. 103-125.

  Research output: Contribution to conference › Conference article › Scientific

  1 Citation (Scopus)

• Extending the use of fibre based substrates: Case studies

  Kunnari, V., 2011, Advances in Printing and Media Technology: Proceedings of the 38th international research conference of IARIGAI, Budapest-Debrecen, Hungary, September 11 to 14, 2011. Enlund, N. (ed.). IARIGAI - International Association of Research Organizations for the Printing, Information and Communication Industries, Vol. XXXVIII.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Extending the use of fibre based substrates using novel surface treatment methods

  Kunnari, V., Kokko, A., Erho, T., Kaljunen, T., Sipiläinen-Malm, T. & Keränen, M., 2011, 25. PTS Streicherei Symposium - 25th PTS Coating Symposium: Tagungsband - Proceedings. Sangl, R. (ed.). München, 419

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

• Fabrication and characterization of polymer optical waveguides with integrated micromirrors for three-dimensional board-level optical interconnects

  Immonen, M., Karppinen, M. & Kivilahti, J., 2005, In: IEEE Transactions on Electronics Packaging Manufacturing. 28, 4, p. 304 - 311 8 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  63 Citations (Scopus)

• Fabrication of microfluidic cavities using Si-to-glass anodic bonding

  Zhelev, N., Thanniyil Sebastian, A., Bennett, R. G., Smith, E. N., Ilic, B., Parpia, J. M., Levitin, L. V., Rojas, X., Casey, A. & Saunders, J., 13 Jul 2018, In: Review of Scientific Instruments. 89, 7, 073902.

  Research output: Contribution to journal › Article › Scientific › peer-review
  7 Citations (Scopus)

• Fabrication of Plastic Microfluidic Channels using Roll to Roll Hot Em

  Mäkelä, T., Haatainen, T., Majander, P. & Ahopelto, J., 2006.

  Research output: Contribution to conference › Conference article › Scientific › peer-review

• Fabrication of silicon and glass devices for microfluidic bioanalytical applications: Dissertation

  Kolari, K., 2007, Espoo: VTT Technical Research Centre of Finland. 106 p.

  Research output: Thesis › Dissertation › Collection of Articles

  Open Access
  1 Citation (Scopus)

• FACESS, Flexible autonomous cost efficient energy source and storage: Final report

  Rönkä, K. (ed.), 2011, Espoo: VTT Technical Research Centre of Finland. 77 p. (VTT Tiedotteita - Research Notes; No. 2602).

  Research output: Book/Report › Report

  Open Access

• Failure Mechanisms in Flip-Chip Bonding on Stretchable Printed Electronics

  Behfar, M. H., Khorramdel, B., Korhonen, A., Jansson, E., Leinonen, A., Tuomikoski, M. & Mäntysalo, M., Dec 2021, In: Advanced Engineering Materials. 23, 12, 9 p., 2100264.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  2 Citations (Scopus)

  19 Downloads (Pure)

• Fast and cost-effective in-process defect inspection for printed electronics based on coherent optical processing

  Feng, X., Su, R., Happonen, T., Liu, J. & Leach, R., 28 May 2018, In: Optics Express. 26, 11, p. 13927-13936 10 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  14 Citations (Scopus)

• Feasibility for system integration in roll to roll processing

  Jaakola, T. & et al., 2012.

  Research output: Contribution to conference › Conference article › Professional

• Fiber-based substrate for printed electronics

  Torvinen, K., Sievänen, J., Hjelt, T. & Hellen, E., 2012, In: Paperi ja puu. 1

  Research output: Contribution to journal › Article › Professional

• Filler-nanocellulose substrate for printed electronics: Experiments and model approach to structure and conductivity

  Penttilä, A., Sievänen, J., Torvinen, K., Ojanperä, K. & Ketoja, J., 2013, In: Cellulose. 20, 3, p. 1413-1424 12 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  37 Citations (Scopus)

• Finnish bioeconomy on the global product market in 2035

  Arasto, A. (ed.), Asikainen, A. (ed.), Kaukovirta, A. (ed.), Harlin, A., Hulkko, J., Hytönen, E., Liitiä, T., Nordlund, E., Oksman-Caldentey, K-M., Pulli, T., Tammelin, T., Tamminen, T., Asikainen, A., Finni, S., Granato, D., Herajärvi, H., Kotilainen, T., Mäkinen, S., Rinne, M., Soini, K., & 3 othersTyrväinen, L., Vilkki, J. & Winquist, E., 9 Feb 2021, VTT Technical Research Centre of Finland. 36 p. (VTT White Paper).

  Research output: Book/Report › Report

  Open Access

  File
  232 Downloads (Pure)

• Flexible bio-based pigment nanocellulose substrate for printed electronics

  Torvinen, K., Sievänen, J., Mattila, T., Alastalo, A. & Hellen, E., 2012.

  Research output: Contribution to conference › Conference article › Scientific

• Flexible bio-based pigment-nanocellulose substrate for printed electronics with good thermal tolerance

  Torvinen, K., Hassinen, T., Sievänen, J., Majumdar, H., Mattila, T. & Hellén, E., 2013.

  Research output: Contribution to conference › Conference article › Scientific

• Flexible bioimpedance spectroscopy system for wound care monitoring

  McCaffrey, C., Flak, J., Kiri, K. & Pursula, P., 5 Dec 2019, 2019 IEEE Biomedical Circuits and Systems Conference (BioCAS): BioCAS 2019. IEEE Institute of Electrical and Electronic Engineers, 4 p. 8919095

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  6 Citations (Scopus)

• Flexible OPV modules for highly efficient indoor applications

  Ylikunnari, M., Välimäki, M., Väisänen, K. L., Kraft, T. M., Sliz, R., Corso, G., Po, R., Barbieri, R., Carbonera, C., Gorni, G. & Vilkman, M., 12 Feb 2020, In: Flexible and Printed Electronics. 5, 1, 014008.

  Research output: Contribution to journal › Article › Scientific › peer-review
  24 Citations (Scopus)

• Flexible pigment-cellulose nanofibril composites for printed electronics applications: Dissertation

  Torvinen, K., 2017, Espoo: VTT Technical Research Centre of Finland. 129 p.

  Research output: Thesis › Dissertation › Monograph

  Open Access

• Flexible pigment-nanocellulose substrate for printed electronics with good thermal tolerance

  Torvinen, K., Sievänen, J., Hassinen, T., Mattila, T. & Hellen, E., 2014, ISN²A 2014 Proceedings: 1st International Symposium on Nanoparticles/Nanomaterial and Applications.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Professional

• Flexographic printing of polycarbazole-based inverted solar cells

  Alem, S., Graddage, N., Lu, J., Kololuoma, T., Movileanu, R. & Tao, Y., 1 Jan 2018, In: Organic Electronics. 52, p. 146-152 7 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  27 Citations (Scopus)

• Flexography-printed In2O3 semiconductor layers for high-mobility thin-film transistors on flexible plastic substrate

  Leppäniemi, J., Huttunen, O-H., Majumdar, H. & Alastalo, A., 2015, In: Advanced Materials. 27, 44, p. 7168-7175

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  89 Citations (Scopus)

• Flow restrictor silicon membrane microvalve actuated by optically controlled paraffin phase transition

  Kolari, K., Havia, T., Stuns, I. & Hjort, K., 2014, In: Journal of Micromechanics and Microengineering. 24, 8, 6 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  5 Citations (Scopus)

• Fluorimetric oxygen sensor for in vitro cell models

  Välimäki, H., Kreutzer, J., Verho, J., Tappura, K. & Lekkala, J., 2016, In: Procedia Engineering. 168, p. 610-613

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access