Find Research outputs

Search results

• Wavelength Scanning Interferometry for Topography of Microchannels at Roll-to-Roll Line with Optical Coherence Tomography

  Lauri, J., Liedert, C. & Fabritius, T., 17 May 2021, 2021 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE Institute of Electrical and Electronic Engineers, 9460091. (IEEE International Instrumentation and Measurement Technology Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Roll-to-roll paper sensors (ROPAS); Wireless communicating sensors on paper in the logistic chain

  Rentrop, C., Rubingh, E., Lelieveld, R. & Sandberg, H., 2014, Proceedings of the 5th Electronics System-Integration Technology Conference, ESTC 2014. IEEE Institute of Electrical and Electronic Engineers

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  2 Citations (Scopus)

• Roll-to-roll reverse offset printing of millimeter-wave transmission lines and antennas on flexible substrates

  Zheng, J., Ala-Laurinaho, J., Sneck, A., Mäkelä, T., Alastalo, A. & Räisänen, A. V., 2018, 12th European Conference on Antennas and Propagation, EuCAP 2018. Institution of Engineering and Technology IET, Vol. CP741. 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  1 Citation (Scopus)

• Roll-to-roll compatible organic thin film transistor manufacturing technique by printing, lamination, and laser ablation

  Hassinen, T., Ruotsalainen, T., Laakso, P., Penttilä, R. & Sandberg, H. G. O., 2014, In: Thin Solid Films. 571, p. 212-217

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  17 Citations (Scopus)

• Suitability of roll-to-roll reverse offset printing for mass production of millimeter-wave antennas: Progress report

  Räisänen, A. V., Ala-Laurinaho, J., Asadchy, V., Diaz-Rubio, A., Khanal, S., Semkin, V., Tretyakov, S., Wang, X., Zheng, J., Alastalo, A., Mäkelä, T. & Sneck, A., 9 Jan 2016, Antennas & Propagation Conference (LAPC), 2016 Loughborough. IEEE Institute of Electrical and Electronic Engineers, p. 1-5

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  6 Citations (Scopus)

• Micro roll-to-roll patterning process and its application on flexible display

  Lo, C-Y., Hiitola-Keinänen, J., Huttunen, O-H., Petäjä, J., Hast, J., Maaninen, A. & Kopola, H., 2009, In: Japanese Journal of Applied Physics. 48, 6 Part 2

  Research output: Contribution to journal › Article › Scientific › peer-review
  14 Citations (Scopus)

• Practical design guidelines for the development of high-precision roll-to-roll slot-die coating equipment and the process

  Seong, J., Park, J., Lee, J., Ahn, B., Yeom, J. H., Kim, J., Hassinen, T., Rhee, S., Ko, S., Lee, D. & Shin, K-H., 2016, In: IEEE Transactions on Components, Packaging and Manufacturing Technology. 6, 11, p. 1677-1686

  Research output: Contribution to journal › Article › Scientific › peer-review
  9 Citations (Scopus)

• Disposable (bio)chemical integrated optical waveguide sensors implemented on roll-to-roll produced platforms

  Aikio, S., Zeilinger, M., Hiltunen, J., Hakalahti, L., Hiitola-Keinänen, J., Hiltunen, M., Kontturi, V., Siitonen, S., Puustinen, J., Lieberzeit, P. & Karioja, P., 2016, In: RSC Advances. 6, 56, p. 50414-50422

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  15 Citations (Scopus)

• Novel roll-to-roll lift-off patterned active-matrix display on flexible polymer substrate

  Lo, C-Y., Hiitola-Keinänen, J., Huttunen, O-H., Petäjä, J., Hast, J., Maaninen, A., Kopola, H., Fujita, H. & Toshiyoshi, H., 2009, In: Microelectronic Engineering. 86, 4-6, p. 979-983 5 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  36 Citations (Scopus)

• Nanoparticle sintering methods and applications for printed electronics: Dissertation

  Allen, M. L., 2011, Espoo: Aalto University. 93 p.

  Research output: Thesis › Dissertation › Collection of Articles

  Open Access

• Printed electronics based adaptive decoy: Invited paper

  Huttunen, A. & Kololuoma, T., 14 Oct 2021, Target and Background Signatures VII. Stein, K. U. & Schleijpen, R. (eds.). International Society for Optics and Photonics SPIE, 7 p. 118650K. (Proceedings of SPIE - The International Society for Optical Engineering, Vol. 11865).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Adhesive bonding strength for printed and hybrid electronics

  Happonen, T., Korhonen, A., Kololuoma, T. & Rönkä, K., 16 Sep 2021, 2021 23rd European Microelectronics and Packaging Conference & Exhibition (EMPC). Wiley-IEEE Press, 6 p. 9585000

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Disposable photonic integrated circuits for evanescent wave sensors by ultra-high volume roll-to-roll method

  Aikio, S., Hiltunen, J., Hiitola-Keinänen, J., Hiltunen, M., Kontturi, V., Siitonen, S., Puustinen, J. & Karioja, P., 2016, In: Optics Express. 24, 3, p. 2527-2541

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  27 Citations (Scopus)

• Enhancement of lateral control via vision system for printed electronics

  Hoang, N., Sallinen, M. & Lee, S., 2012, In: Advanced Science Letters. 8, p. 153-157

  Research output: Contribution to journal › Article › Scientific › peer-review

• Failure Mechanisms in Flip-Chip Bonding on Stretchable Printed Electronics

  Behfar, M. H., Khorramdel, B., Korhonen, A., Jansson, E., Leinonen, A., Tuomikoski, M. & Mäntysalo, M., Dec 2021, In: Advanced Engineering Materials. 23, 12, 9 p., 2100264.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  1 Citation (Scopus)

  15 Downloads (Pure)

• Barrier properties of plastic films coated with an Al2O3 layer by roll-to-toll atomic layer deposition

  Hirvikorpi, T., Laine, R., Vähä-Nissi, M., Kilpi, V., Salo, E., Lia, W-M., Lindfors, S., Vartiainen, J., Kenttä, E., Nikkola, J., Harlin, A. & Kostamo, J., 2014, In: Thin Solid Films. 550, p. 164 - 169

  Research output: Contribution to journal › Article › Scientific › peer-review
  41 Citations (Scopus)

• Roll-to-Roll Fabrication of Bulk Heterojunction plastic solar cells using the reverse gravure coating technique

  Tobjörk, D., Aarnio, H., Mäkelä, T. & Österbacka, R., 2008, Symposium AA – Conjugated Organic Materials–Synthesis, Structure, Device and Applications. Materials Research Society, p. 1091-AA05-45 (MRS Online Proceedings , Vol. 1091).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  9 Citations (Scopus)

• Integrating Printed and Silicon Electronics

  Mäntysalo, M. & Kraft, T., Sep 2016, International Conference on Flexible and Printed Electroncis . Yonezawa

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Professional

• Roll-to-roll compatible flexible polymer solar cells incorporating a water-based solution-processable silver back electrode with low annealing temperature

  Iannaccone, G., Välimäki, M., Jansson, E., Sunnari, A., Corso, G., Bernardi, A., Levi, M., Turri, S., Hast, J. & Griffini, G., 2015, In: Solar Energy Materials and Solar Cells. 143, p. 227-235

  Research output: Contribution to journal › Article › Scientific › peer-review
  19 Citations (Scopus)

• Reliability study on adhesive interconnections in flex-to-flex printed electronics applications under environmental stresses

  Happonen, T., Voutilainen, J. V. & Fabritius, T., 1 Dec 2014, In: IEEE Transactions on Device and Materials Reliability. 14, 4, p. 1005-1012 8 p., 6899652.

  Research output: Contribution to journal › Article › Scientific › peer-review
  16 Citations (Scopus)

• Printed Electronics Insights: Advancing Wearables

  Hast, J., 15 Nov 2017.

  Research output: Contribution to conference › Conference Abstract › Scientific › peer-review

• Suitability of Paper-Based Substrates for Printed Electronics

  Jansson, E., Lyytikäinen, J., Tanninen, P., Eiroma, K., Leminen, V., Immonen, K. & Hakola, L., 26 Jan 2022, In: Materials. 15, 3, 957.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  31 Downloads (Pure)

• Benefits of inkjet printing for printed electronics

  Hakola, L., 2005. 22 p.

  Research output: Contribution to conference › Other conference contribution › Professional

• Mechatronic systems techniques for intelligent paper roll manipulator systems

  Vähä, P., Röning, J., Heikkilä, T., Kerva, J. & Rehu, J., 2000, Mechatronic systems techniques and applicatons: Electromechanical Systems. Gordon and Breach Science Publishers, Vol. 4. p. 231-297

  Research output: Chapter in Book/Report/Conference proceeding › Chapter or book article › Scientific › peer-review

• Fiber-based substrate for printed electronics

  Torvinen, K., Sievänen, J., Hjelt, T. & Hellen, E., 2012, In: Paperi ja puu. 1

  Research output: Contribution to journal › Article › Professional