Find Research outputs

Search results

• Fiber-based substrate for printed electronics

  Torvinen, K., Sievänen, J., Hjelt, T. & Hellen, E., 2012, In: Paperi ja puu. 1

  Research output: Contribution to journal › Article › Professional

• Reliability of electrically conductive adhesive interconnections in printed flex-to-flex system integration

  Happonen, T., Tuomikoski, M. & Rönkä, K., 2017. 1 p.

  Research output: Contribution to conference › Conference Poster › Scientific

  Open Access

• Automated guided vehicle with intelligent clamp for paper roll handling in warehouses

  Rehu, J., Kaarmila, P., Känsälä, K., Vähä, P. & Merin, P., 1999, Proceedings Scandinavian Symposium on Robotics 1999. Oulu, p. 258 - 263

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

• Flexible bio-based pigment nanocellulose substrate for printed electronics

  Torvinen, K., Sievänen, J., Mattila, T., Alastalo, A. & Hellen, E., 2012.

  Research output: Contribution to conference › Conference article › Scientific

• Sustainable substrate for printed electronics

  Hakola, L. & Jansson, E., 2019, Printing for Fabrication 2019: Materials, Applications, and Process - Technical Program and Proceedings. The Society for Imaging Science and Technology, IS&T, p. 132-137 6 p. (International Conference on Digital Printing Technologies, Vol. 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Large area printed smart systems: From components to systems

  Kemppainen, A., Kopola, H., Korhonen, R., Alastalo, A., Maaninen, A., Tuomikoski, M., Hast, J. & Laakso, P., 2009.

  Research output: Contribution to conference › Conference article › Scientific

• Oriented and annealed poly(lactic acid) films and their performance in flexible printed and hybrid electronics

  Luoma, E., Välimäki, M., Rokkonen, T., Sääskilahti, H., Ollila, J., Rekilä, J. & Immonen, K., Oct 2021, In: Journal of Plastic Film and Sheeting. 37, 4, p. 429-462 34 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  6 Citations (Scopus)

• Flexible OPV modules for highly efficient indoor applications

  Ylikunnari, M., Välimäki, M., Väisänen, K. L., Kraft, T. M., Sliz, R., Corso, G., Po, R., Barbieri, R., Carbonera, C., Gorni, G. & Vilkman, M., 12 Feb 2020, In: Flexible and Printed Electronics. 5, 1, 014008.

  Research output: Contribution to journal › Article › Scientific › peer-review
  23 Citations (Scopus)

• Bio-Based Polymeric Substrates for Printed Hybrid Electronics

  Luoma, E., Välimäki, M., Ollila, J., Heikkinen, K. & Immonen, K., 2 May 2022, In: Polymers. 14, 9, 19 p., 1863.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

• Integrated printed hybrid electronics on paper

  Sandberg, H. G. O., Gaspar, C., Hakola, L. & Rentrop, C., 2014, Proceedings of the 5th Electronics System-Integration Technology Conference, ESTC 2014. IEEE Institute of Electrical and Electronic Engineers

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific
  6 Citations (Scopus)

• Evaluation of printed electronics manufacturing line with sensor platform application

  Halonen, E., Kaija, K., Mäntysalo, M., Kemppainen, A., Osterbacka, R. & Björklund, N., 2009, 2009 European Microelectronics and Packaging Conference. IEEE Institute of Electrical and Electronic Engineers

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  10 Citations (Scopus)

• Modelling web behaviour in printing press and in printed electronics

  Parola, M. & Sorvari, J., 2013.

  Research output: Contribution to conference › Conference article › Professional

• Flexible pigment-cellulose nanofibril composites for printed electronics applications: Dissertation

  Torvinen, K., 2017, Espoo: VTT Technical Research Centre of Finland. 129 p.

  Research output: Thesis › Dissertation › Monograph

  Open Access

• Image quality measurements in the quality control of printed electronics

  Heilmann, J., Juhola, H., Linna, H. & Hakola, L., 2003. 8 p.

  Research output: Contribution to conference › Conference article › Scientific

• Flexible pigment-nanocellulose substrate for printed electronics with good thermal tolerance

  Torvinen, K., Sievänen, J., Hassinen, T., Mattila, T. & Hellen, E., 2014, ISN²A 2014 Proceedings: 1st International Symposium on Nanoparticles/Nanomaterial and Applications.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Professional

• Printed and Hybrid Electronics Manufacturing: Practical Experiences on Process and Design

  Kemppainen, A., Kurkela, T., Kololuoma, T., Mattila, T., Keränen, M. & Rönkä, K., 2018.

  Research output: Contribution to conference › Conference Abstract › Scientific

• Optimization and improvement of TIPS-pentacene transistors (OTFT) with UV-ozone and chemical treatments using an all-step solution process

  Kim, J., Kim, J., Ahn, B., Hassinen, T., Jung, Y. & Ko, S., 2015, In: Current Applied Physics. 15, 10, p. 1238-1244

  Research output: Contribution to journal › Article › Scientific › peer-review
  15 Citations (Scopus)

• Substrates based on cellulose nanofibrils for printed electronics and optics

  Torvinen, K., Makela, T., Khakalo, A. & Tammelin, T., Jun 2019, International Conference on Nanotechnology for Renewable Materials 2019. TAPPI Press, p. 279-289 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Machine of the future: An intelligent paper roll manipulator

  Vähä, P., Heikkilä, T., Röning, J. & Okkonen, J., 1994, In: Mechatronics. 4, 8, p. 861-877 17 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  3 Citations (Scopus)

• Fast and cost-effective in-process defect inspection for printed electronics based on coherent optical processing

  Feng, X., Su, R., Happonen, T., Liu, J. & Leach, R., 28 May 2018, In: Optics Express. 26, 11, p. 13927-13936 10 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  14 Citations (Scopus)

• Gravure printed sol-gel derived AlOOH hybrid nanocomposite thin films for printed electronics

  Kololuoma, T., Leppäniemi, J., Majumdar, H., Branquinho, R., Hervei-Valcu, E., Musat, V., Martins, R., Fortunato, E. & Alastalo, A., 2015, In: Journal of Materials Chemistry C. 3, 8, p. 1776-1786

  Research output: Contribution to journal › Article › Scientific › peer-review
  7 Citations (Scopus)

• Hybrid Integrated Printed and Flexible Electronics for Sensing and Wearable Applications

  Kololuoma, T., 2018.

  Research output: Contribution to conference › Other conference contribution › Professional

• Flexible bio-based pigment-nanocellulose substrate for printed electronics with good thermal tolerance

  Torvinen, K., Hassinen, T., Sievänen, J., Majumdar, H., Mattila, T. & Hellén, E., 2013.

  Research output: Contribution to conference › Conference article › Scientific

• A microfluidic chip and a method for the manufacture of a microfluidic chip

  Maaninen, T., Kokkonen, A., Kurkinen, M. & Aikio, S., 31 Dec 2018, IPC No. G01N 35/ 00 A N, Patent No. FI20175637, Priority date 30 Jun 2017, Priority No. FI20170005637

  Research output: Patent › Patent

• Biomedical diagnostics enabled by integrated organic and printed electronics

  Ahmadraji, T., Gonzalez-Macia, L., Ritvonen, T., Willert, A., Ylimaula, S., Donaghy, D., Tuurala, S., Suhonen, M., Smart, D., Morrin, A., Efremov, V., Baumann, R., Raja, M., Kemppainen, A. & Killard, A., 2017, In: Analytical Chemistry. 89, 14, p. 7447-7454

  Research output: Contribution to journal › Article › Scientific › peer-review
  23 Citations (Scopus)