Find Research outputs

Search results

• Scale-up of manufacturing of printed enzyme electrodes for enzymatic power source applications

  Tuurala, S., Kaukoniemi, O-V., von Hertzen, L., Uotila, J., Vaari, A., Bergelin, M., Sjöberg, P., Eriksson, J-E. & Smolander, M., 2014, In: Journal of Applied Electrochemistry. 44, 7, p. 881-892 12 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  5 Citations (Scopus)

• A disposable, roll-to-roll hot-embossed inertial microfluidic device for size-based sorting of microbeads and cells

  Wang, X., Liedert, C., Liedert, R. & Paputsky, I., 2016, In: Lab on a Chip. 16, 10, p. 1821-1830

  Research output: Contribution to journal › Article › Scientific › peer-review
  43 Citations (Scopus)

• IR-sintering of ink-jet printed metal-nanoparticles on paper

  Tobjörk, D., Aarnio, H., Pulkkinen, P., Bollström, R., Määttänen, A., Ihalainen, P., Mäkelä, T., Peltonen, J., Toivakka, M. & Tenhu, H., 2012, In: Thin Solid Films. 520, 7, p. 2949-2955 7 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  130 Citations (Scopus)

• All-printable electronic devices: Towards high volume manufacturing methods

  Mäkelä, T., 2008.

  Research output: Contribution to conference › Conference article › Scientific

• Flexography-printed In2O3 semiconductor layers for high-mobility thin-film transistors on flexible plastic substrate

  Leppäniemi, J., Huttunen, O-H., Majumdar, H. & Alastalo, A., 2015, In: Advanced Materials. 27, 44, p. 7168-7175

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  85 Citations (Scopus)

• Inkjet printing for making fine conductors and multi layer electronics

  Hakola, L., 2006. 19 p.

  Research output: Contribution to conference › Other conference contribution › Professional

  Open Access

• Printed, Highly Stable Metal Oxide Thin-Film Transistors with Ultra-Thin High-κ Oxide Dielectric

  Carlos, E., Leppäniemi, J., Sneck, A., Alastalo, A., Deuermeier, J., Branquinho, R., Martins, R. & Fortunato, E., 1 Mar 2020, In: Advanced Electronic Materials. 6, 3, 1901071.

  Research output: Contribution to journal › Article › Scientific › peer-review
  28 Citations (Scopus)

• Printed electronic switch on flexible substrates using printed microcapsules

  ten Cate, A. T., Gaspar, C., Virtanen, H. L. K., Stevens, R. S. A., Koldeweij, R. B. J., Olkkonen, J. T., Rentrop, C. H. A. & Smolander, M. H., 2014, In: Journal of Materials Science. 49, 17, p. 5831-5837

  Research output: Contribution to journal › Article › Scientific › peer-review
  12 Citations (Scopus)

• How to Maximize the Registration Accuracy in R2R Processing

  Sumen, J., Ylimaula, S., Rooms, H., Takaluoma, A., Välimäki, M., von Morgen, V., Kraft, T. & Vilkman, M., 16 Dec 2021, Proceedings of the 2021 International Conference on Micro- and Nano-devices Enabled by R2R Manufacturing. University of Texas at Austin, 2 p. TP2.2

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  Open Access

• Printed temperature and moisture sensors

  Voutilainen, J. V., Happonen, T., Häkkinen, J. & Fabritius, T., 1 Jan 2014, IMAPS Nordic Annual Conference 2014. Kutilainen, J. (ed.). IMAPS Nordic, p. 109-110

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Roadmap on printed functionality and hybrid media

  Hakola, L., Lindqvist, U., Linna, H., Siivonen, T. & Södergård, C., 2006, Proceedings. IARIGAI - International Association of Research Organizations for the Printing, Information and Communication Industries, 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Printed and low-temperature-processed indium oxide thin-film transistors for flexible applications: Dissertation

  Leppäniemi, J., 2017, Espoo: Aalto University. 162 p.

  Research output: Thesis › Dissertation › Collection of Articles

  Open Access

• Nanoimprint lithography for organic electronics

  Cedeño, C. C., Seekamp, J., Kam, A. P., Hoffmann, T., Zankovych, S., Sotomayor Torres, C. M., Menozzi, C., Cavallini, M., Murgia, M., Ruani, G., Biscarini, F., Behl, M., Zentel, R. & Ahopelto, J., 2002, In: Microelectronic Engineering. 61-62, p. 25-31

  Research output: Contribution to journal › Article › Scientific › peer-review
  70 Citations (Scopus)

• Technical innovations and business from printed functionality

  Lindqvist, U., Eiroma, K., Hakola, L., Jussila, S., Kaljunen, T., Moilanen, P., Rusko, E., Siivonen, T. & Välkkynen, P., 2008, Espoo: VTT Technical Research Centre of Finland. 84 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 2436).

  Research output: Book/Report › Report

  Open Access

• Printed intelligence for consumer products

  Hakola, L., Gaspar, C., Ilmonen, A., Lehtinen, K. & Smolander, M., 2014, Proceedings of the 5th Electronics System-integration Technology Conference, ESTC 2014. IEEE Institute of Electrical and Electronic Engineers, p. 126-139

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  1 Citation (Scopus)

• High performance solution processed oxide thin-film transistors with inkjet printed Ag source-drain electrodes

  Gillan, L., Leppäniemi, J., Eiroma, K., Majumdar, H. & Alastalo, A., 1 Jan 2018, In: Journal of Materials Chemistry C. 6, 13, p. 3220-3225 6 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  12 Citations (Scopus)

• High frequency transmission properties of printed graphene

  Ermolov, V. & Saijets, J., 2015.

  Research output: Contribution to conference › Conference Abstract › Scientific

• Printed supercapacitors on paperboard substrate

  Keskinen, J., Sivonen, E., Jussila, S., Bergelin, M., Johansson, M., Vaari, A. & Smolander, M., 2012, In: Electrochimica Acta. 85, p. 302-306 4 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  31 Citations (Scopus)

• All-printed low-voltage organic transistors

  Tobjörk, D., Kaihovirta, N., Mäkelä, T., Pettersson & Österbacka, R., 2008, In: Organic Electronics. 9, 6, p. 931-935 5 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  77 Citations (Scopus)

• Communicating environmental performance of printed products

  Kariniemi, M., Nors, M., Federley, M. & Pihkola, H., 2011, NIP27: 27th International Conference on Digital Printing Technologies & Digital Fabrication 2011: technical programs and proceedings. The Society for Imaging Science and Technology, IS&T, p. 732-735

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Partial carbon footprint estimate for printed electronic circuit

  Niininen, M., Siitonen, S., Gooden, P., Leedham, T., Alastalo, A. & Kololuoma, T., 2014.

  Research output: Contribution to conference › Conference Poster › Scientific

• Sintering of printed nanoparticle structures using laser treatment

  Laakso, P., Ruotsalainen, S., Halonen, E., Mäntysalo, M. & Kemppainen, A., 2009, Proceedings of ICALEO 2009: 28th International Congress on Applications of Lasers and Electro-Optics. Orlando: Laser Institute of America, p. 1360-1366

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  22 Citations (Scopus)

• Printed and organic diodes: devices, circuits and applications

  Kraft, T., Berger, P. & Lupo, D., 29 Sep 2017, In: Flexible and Printed Electronics. 2, 3, 033001.

  Research output: Contribution to journal › Article › Scientific › peer-review
  6 Citations (Scopus)

• Printable optics and electronics: a short summary from the printo-project 2002 - 2004

  Kololuoma, T., 2006, Research and development activities in printed intelligence 2006. VTT Technical Research Centre of Finland, p. 7-11

  Research output: Chapter in Book/Report/Conference proceeding › Chapter or book article › Professional

• Printed diagnostics: the lab of the future will be flat

  Kololuoma, T. & Liedert, R., 2014.

  Research output: Contribution to conference › Conference article › Scientific