Find Research outputs

Search results

• In-mould integration of electronics into mechanics and reliability of overmoulded electronic and optoelectronic components

  Alajoki, T., Koponen, M., Juntunen, E., Petaja, J., Heikkinen, M., Ollila, J., Sitomaniemi, A., Kosonen, T., Aikio, J. & Makinen, J-T., 2009, European Microelectronics and Packaging Conference. IEEE Institute of Electrical and Electronic Engineers, p. 1-6

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  9 Citations (Scopus)

• Printed supercapacitors: Manufacturing, electrical properties and life-time

  Keskinen, J., von Hertzen, L., Bergelin, M., Johansson, M., Flyktman, T. & Jansson, E., 2014.

  Research output: Contribution to conference › Other conference contribution › Scientific

• Measuring and modelling the thermal behavior of LEDs in structural electronics

  Hannila, E., Heinilehto, N., Lauri, J., Keränen, K. & Fabritius, T., 2020, 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). Piscataway: IEEE Institute of Electrical and Electronic Engineers, 6 p. (IEEE International Instrumentation and Measurement Technology Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  1 Citation (Scopus)

• Nanocellulose–polyurethane substrate material with tunable mechanical properties for wearable electronics

  Pursula, P., Kiri, K., McCaffrey, C., Sandberg, H., Vartiainen, J., Flak, J. & Lahtinen, P., 8 Nov 2018, In: Flexible and Printed Electronics. 3, 12 p., 045002.

  Research output: Contribution to journal › Article › Scientific › peer-review
  9 Citations (Scopus)

• Printed low-voltage programmable write-once-read-many-memories

  Leppäniemi, J., Fukuda, N., Alastalo, A., Mattila, T., Eiroma, K. & Kololuoma, T., 2014, Proceedings of the 5th Electronics System-Integration Technology Conference, ESTC 2014. IEEE Institute of Electrical and Electronic Engineers

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  1 Citation (Scopus)

• Anode ink formulation for a fully printed flexible fuel cell stack

  Hakola, L., Parra Puerto, A., Vaari, A., Maaninen, T., Kucernak, A., Viik, S. & Smolander, M., Jun 2020, In: Flexible and Printed Electronics. 5, 2, 025002.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  3 Citations (Scopus)

  107 Downloads (Pure)

• Printed polymer rectifier circuit and APLAC simulation method

  Hassinen, T., Qing, Q., Seppä, H., Helistö, P. & Sandberg, H., 2008.

  Research output: Contribution to conference › Conference Abstract › Scientific

• Contactless read-out of printed memory

  Allen, M., Aronniemi, M., Mattila, T., Helistö, P., Sipola, H., Rautiainen, A., Leppäniemi, J., Alastalo, A., Korhonen, R. & Seppä, H., 2011, In: Microelectronic Engineering. 88, 9, p. 2941-2945 5 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  7 Citations (Scopus)

• Hybrid Thermal Modeling to Predict LED Thermal Behavior in Hybrid Electronics

  Hannila, E., Heinilehto, N., Remes, K., Lauri, J., Keranen, K. & Fabritius, T., 2021, In: IEEE Transactions on Instrumentation and Measurement. 70, 9286559.

  Research output: Contribution to journal › Article › Scientific › peer-review

• Inkjet printed metallic micropillars for bare die flip-chip bonding

  Khorramdel, B., Kraft, T. M. & Mäntysalo, M., 1 Dec 2017, In: Flexible and Printed Electronics. 2, 4, 045005.

  Research output: Contribution to journal › Article › Scientific › peer-review
  7 Citations (Scopus)

• High rectifier output voltages with printed organic charge pump circuit

  Heljo, P., Lilja, K. E., Majumdar, H. & Lupo, D., 2014, In: Organic Electronics. 15, 1, p. 306-310 5 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  22 Citations (Scopus)

• Low cost printed flexible multilayer substrates

  Jaakola, T., Lahti, M., Petäjä, J., Kautio, K., Rönkä, K. & Lenkkeri, J., 2008, Proceedings: 10th Electronics Packaging Technology Conference, EPTC 2008. Piscataway, NJ, USA: IEEE Institute of Electrical and Electronic Engineers, p. 344-349

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  9 Citations (Scopus)

• Low-cost microfluidics and mobile diagnostics

  Liedert, C., Kurkinen, M., Mäkinen, J-T., Takalo-Mattila, J., Kokkonen, A. & Hakalahti, L., 2016.

  Research output: Contribution to conference › Conference article › Scientific

• Beyond flexible towards sustainable electronics: 55-1 / A. Vasara Invited Paper

  Vasara, A., Hakola, L., Välimäki, M., Vilkman, M., Orelma, H., Immonen, K., Torvinen, K., Hast, J. & Smolander, M., 28 Jun 2021, In: Digest of Technical Papers - SID International Symposium. 52, 1, p. 764-767 4 p.

  Research output: Contribution to journal › Article in a proceedings journal › Scientific › peer-review
  1 Citation (Scopus)

• NOx gas ppm level monitoring using gravure printed gas sensor

  Sunnari, A., Gornostayev, D., Lappalainen, J., Hast, J., Hassinen, T. & Jansson, E., 2010.

  Research output: Contribution to conference › Other conference contribution › Scientific

• Dielectric properties of a printed sol-gel matrix composite

  Lehnert, T., Herbeck-Engel, P., Adam, J., Klein, G., Kololuoma, T. & Veith, M., 2010, In: Advanced Engineering Materials. 12, 5, p. 379-384 6 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  7 Citations (Scopus)

• Technologies, innovations and new business opportunities in printed intelligence

  Kopola, H., Hurme, E., Kuusisto, J-M., Smolander, M., Tuomikoski, M., Kololuoma, T., Hast, J., Känsäkoski, M., Alastalo, A., Kemppainen, A., Södergård, C., Qvintus-Leino, P. & Maaninen, A., 2007, Proceedings on CD.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Screen-Printed Remotely Readable Environmental Sensor Pair

  Voutilainen, J. V., Happonen, T., Häkkinen, J. & Fabritius, T., 15 May 2016, In: IEEE Sensors Journal. 16, 10, p. 3523-3531 9 p., 7416139.

  Research output: Contribution to journal › Article › Scientific › peer-review
  5 Citations (Scopus)

• Evaluation of 3D Printed Cobalt Iron Cores for Filter Inductors

  Wang, J., Yuan, X., Riipinen, T., Pippuri-Makelainen, J., Metsa-Kortelainen, S. & Lindroos, T., Aug 2020, In: IEEE Transactions on Magnetics. 56, 8, 9109585.

  Research output: Contribution to journal › Article › Scientific › peer-review

• Hybrid in-mould integration

  Alajoki, T., Koponen, M., Huttunen, A., Tuomikoski, M., Heikkinen, M., Keränen, A., Keränen, K., Mäkinen, J-T., Jaakola, T., Aikio, J. & Rönkä, K., 2013, 46th International Symposium on Microelectronics, IMAPS 2013. Curran Associates Inc., p. 188-193

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• The Effect of Torsional Bending on Reliability and Lifetime of Printed Silver Conductors

  Hannila, E., Remes, K., Kurkela, T., Happonen, T., Keranen, K. & Fabritius, T., Jun 2020, In: IEEE Transactions on Electron Devices. 67, 6, p. 2522-2528 7 p., 9089357.

  Research output: Contribution to journal › Article › Scientific › peer-review
  1 Citation (Scopus)

• Electronic Tattoo with Transferable Printed Electrodes and Interconnects for Wireless Electrophysiology Monitoring

  Huttunen, O. H., Behfar, M. H., Hiitola-Keinänen, J. & Hiltunen, J., 21 Jan 2022, (E-pub ahead of print) In: Advanced Materials Technologies.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

• Design and validation of a novel master-making process chain for organic and large area electronics on flexible substrates

  Velkova, V., Lalev, G., Hirshy, H., Scholz, S., Hiitola-Keinänen, J., Gold, H., Haase, A., Hast, J., Stadlober, B. & Dimov, S., 2010, In: Microelectronic Engineering. 87, 11, p. 2139-2145

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  16 Citations (Scopus)

• R2R Electrical Sintering of Nanoparticle Structures

  Allen, M., Alastalo, A., Aronniemi, M., Mattila, T., Sääskilahti, K., Suhonen, M. & Seppä, H., 2008, p. 291-296. 6 p.

  Research output: Contribution to conference › Conference article › Scientific › peer-review

• A screen-printed Ag/AgCl reference electrode with long-term stability for electroanalytical applications

  Dawkins, R. C., Wen, D., Hart, J. N. & Vepsäläinen, M., 10 Oct 2021, In: Electrochimica Acta. 393, 139043.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  3 Citations (Scopus)

  152 Downloads (Pure)