Find Research outputs

Search results

• 2007

  Inkjet printing of transparent and conductive patterns of single-walled carbon nanotubes and PEDOT-PSS composites

  Mustonen, T., Kordás, K., Saukko, S., Tóth, G., Penttilä, J. S., Helistö, P., Seppä, H. & Jantunen, H., 2007, In: Physica Status Solidi B: Basic Research. 244, 11, p. 4336-4340

  Research output: Contribution to journal › Article › Scientific › peer-review
  105 Citations (Scopus)

• Logistics - Increasing intelligence in supply chains

  Permala, A., Kotovirta, V., Huovila, H., Maijala, P., Salmela, H. & Hiljanen, H., 2007, Intelligent Products and Systems: Technology theme - Final report. Ventä, O. (ed.). Espoo: VTT Technical Research Centre of Finland, p. 96-105 (VTT Publications; No. 635).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter or book article › Professional

  Open Access
  1 Citation (Scopus)

• Manufacture of organic electronic components using standard printers/proofers

  Sandberg, H., Lehtinen, K., Jussila, S., Rutanen, K., Ruotsalainen, T. & Hassinen, T., 2007.

  Research output: Contribution to conference › Conference Abstract › Scientific

• Metallic nanoparticles in a polymeric matrix: Electrical impedance switching and negative differential resistance

  Vilkman, M., Baral, J., Laiho, A., Nuopponen, M., Hassinen, T., Ras, R., Sandberg, H. G. O., Tenhu, H., Österbacka, R. & Ikkala, O., 2007.

  Research output: Contribution to conference › Conference article › Scientific

• Physical browsing with NFC technology

  Ailisto, H., Matinmikko, T., Häikiö, J., Ylisaukko-oja, A., Strömmer, E., Hillukkala, M., Wallin, A., Siira, E., Pöyry, A., Törmänen, V., Huomo, T., Tuikka, T., Leskinen, S. & Salonen, J., 2007, VTT Technical Research Centre of Finland. 70 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 2400).

  Research output: Book/Report › Report

  Open Access
  8 Citations (Scopus)

• Printable optics and optoelectronics

  Kopola, H., Tuomikoski, M., Kololuoma, T., Hast, J., Välimäki, M., Kopola, P., Huttunen, O-H. & Maaninen, A., 2007, Advanced Laser Technologies, Book of Abstracts. University of Oulu, 16

  Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Scientific

• Printed Electronics USA 2006; Painaminen suoraan pakkaukseen pudottaisi RFID-tunnisteen hinnan sentteihin

  Paukku, J., 2007, In: GT-lehti. 1, p. 3-5

  Research output: Contribution to journal › Article › Professional

• Printed large area OLED lighting

  Tuomikoski, M., Kopola, P. & Maaninen, A., 2007, Conference Proceedings of Printed Electronics: IDTechEx 2007.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Printed organic solar cells

  Hast, J., Tuomikoski, M., Kopola, P., Maaninen, A. & Kopola, H., 2007, p. 23-29.

  Research output: Contribution to conference › Conference Abstract › Scientific

• Technologies, innovations and new business opportunities in printed intelligence

  Kopola, H., Hurme, E., Kuusisto, J-M., Smolander, M., Tuomikoski, M., Kololuoma, T., Hast, J., Känsäkoski, M., Alastalo, A., Kemppainen, A., Södergård, C., Qvintus-Leino, P. & Maaninen, A., 2007, Proceedings on CD.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Towards printable organic field-effect transistors based on poly(3, 3’’’-didodecyl quarter thiophene) utilizing a crosslinkable gate dielectric layer

  Jussila, S., Ruotsalainen, T. & Sandberg, H., 2007, p. PI-39.

  Research output: Contribution to conference › Conference article › Scientific

• Towards roll to roll manufacturing of flexible OLED devices

  Maaninen, A., Tuomikoski, M., Välimäki, M., Maaninen, T. & Kopola, H., 2007.

  Research output: Contribution to conference › Conference Abstract › Scientific
• 2006

  Electrostatic discharge of charged electronic modules

  Paasi, J., 2006, Proceedings of the 2nd Nordic ESD Conference. 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

• Fabrication of Plastic Microfluidic Channels using Roll to Roll Hot Em

  Mäkelä, T., Haatainen, T., Majander, P. & Ahopelto, J., 2006.

  Research output: Contribution to conference › Conference article › Scientific › peer-review

• Inkjet printing for making fine conductors and multi layer electronics

  Hakola, L., 2006. 19 p.

  Research output: Contribution to conference › Other conference contribution › Professional

  Open Access

• Low cost approach for point-of-care diagnostics

  Känsäkoski, M., Huttunen, O-H., Ollitervo, S., Lippo, S., Kurkinen, M., Kivimäki, L., Pulli, T., Takkinen, K., Maaninen, A. & Kopola, H., 2006.

  Research output: Contribution to conference › Conference Poster › Scientific

• Printable Electronics for Sensors and RFID

  Alastalo, A., 2006, Research and development activities in printed intelligence 2006. VTT Technical Research Centre of Finland, p. 32-33

  Research output: Chapter in Book/Report/Conference proceeding › Chapter or book article › Professional

• Printable optics and electronics: a short summary from the printo-project 2002 - 2004

  Kololuoma, T., 2006, Research and development activities in printed intelligence 2006. VTT Technical Research Centre of Finland, p. 7-11

  Research output: Chapter in Book/Report/Conference proceeding › Chapter or book article › Professional

• Roadmap on printed functionality and hybrid media

  Hakola, L., Lindqvist, U., Linna, H., Siivonen, T. & Södergård, C., 2006, Proceedings. IARIGAI - International Association of Research Organizations for the Printing, Information and Communication Industries, 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Roll-to-roll manufacturing of organic solar cells

  Hast, J., Kopola, H., Tuomikoski, M., Kopola, P. & Maaninen, A., 2006.

  Research output: Contribution to conference › Conference article › Scientific

• Roll to roll nanoimprinting of conducting polyaniline using a novel imprinting device

  Mäkelä, T., Haatainen, T., Majander, P. & Ahopelto, J., 2006, p. 1.

  Research output: Contribution to conference › Conference Abstract › Scientific › peer-review

  Open Access

• Towards Roll-to-roll fabricated integrated modules

  Hast, J., Kololuoma, T., Kopola, H., Maaninen, A., Petäjä, J., Sandberg, H. & Tuomikoski, M., 2006, Proceedings of Printed Electronics Europe 06. 19.-21. 4.. Canbridge

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

• Tunable hydrophilicity on a hydrophobic fluorocarbon polymer coating on silicon

  Kolari, K. & Hokkanen, A., 2006, In: Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films. 24, 4, p. 1005-1011 7 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  13 Citations (Scopus)
• 2005

  A Nordic approach to novel micro and nanotechnology

  Tuovinen, J., Ahopelto, J., Aikio, J., Karioja, P., Kattelus, H., Kololuoma, T., Kopola, H., Oja, A. & Vähä-Heikkilä, T., 2005, Proceedings of 5th ESA/ESTEC. European Space Agency (ESA), 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Benefits of inkjet printing for printed electronics

  Hakola, L., 2005. 22 p.

  Research output: Contribution to conference › Other conference contribution › Professional