Find Research outputs

Search results

• Printed polymer rectifier circuit and APLAC simulation method

  Hassinen, T., Qing, Q., Seppä, H., Helistö, P. & Sandberg, H., 2008.

  Research output: Contribution to conference › Conference Abstract › Scientific

• Partial carbon footprint estimate for printed electronic circuit

  Niininen, M., Siitonen, S., Gooden, P., Leedham, T., Alastalo, A. & Kololuoma, T., 2014.

  Research output: Contribution to conference › Conference Poster › Scientific

• Printed low-voltage programmable write-once-read-many-memories

  Leppäniemi, J., Fukuda, N., Alastalo, A., Mattila, T., Eiroma, K. & Kololuoma, T., 2014, Proceedings of the 5th Electronics System-Integration Technology Conference, ESTC 2014. IEEE Institute of Electrical and Electronic Engineers

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  1 Citation (Scopus)

• Nanocellulose–polyurethane substrate material with tunable mechanical properties for wearable electronics

  Pursula, P., Kiri, K., McCaffrey, C., Sandberg, H., Vartiainen, J., Flak, J. & Lahtinen, P., 8 Nov 2018, In: Flexible and Printed Electronics. 3, 12 p., 045002.

  Research output: Contribution to journal › Article › Scientific › peer-review
  9 Citations (Scopus)

• Printable optics and electronics: a short summary from the printo-project 2002 - 2004

  Kololuoma, T., 2006, Research and development activities in printed intelligence 2006. VTT Technical Research Centre of Finland, p. 7-11

  Research output: Chapter in Book/Report/Conference proceeding › Chapter or book article › Professional

• High rectifier output voltages with printed organic charge pump circuit

  Heljo, P., Lilja, K. E., Majumdar, H. & Lupo, D., 2014, In: Organic Electronics. 15, 1, p. 306-310 5 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  22 Citations (Scopus)

• Technical innovations and business from printed functionality

  Lindqvist, U., Eiroma, K., Hakola, L., Jussila, S., Kaljunen, T., Moilanen, P., Rusko, E., Siivonen, T. & Välkkynen, P., 2008, Espoo: VTT Technical Research Centre of Finland. 84 p. (VTT Tiedotteita - Meddelanden - Research Notes; No. 2436).

  Research output: Book/Report › Report

  Open Access

• Printed diagnostics: the lab of the future will be flat

  Kololuoma, T. & Liedert, R., 2014.

  Research output: Contribution to conference › Conference article › Scientific

• Hybrid Thermal Modeling to Predict LED Thermal Behavior in Hybrid Electronics

  Hannila, E., Heinilehto, N., Remes, K., Lauri, J., Keranen, K. & Fabritius, T., 2021, In: IEEE Transactions on Instrumentation and Measurement. 70, 9286559.

  Research output: Contribution to journal › Article › Scientific › peer-review

• Printed supercapacitors: Manufacturing, electrical properties and life-time

  Keskinen, J., von Hertzen, L., Bergelin, M., Johansson, M., Flyktman, T. & Jansson, E., 2014.

  Research output: Contribution to conference › Other conference contribution › Scientific

• Sintering of printed nanoparticle structures using laser treatment

  Laakso, P., Ruotsalainen, S., Halonen, E., Mäntysalo, M. & Kemppainen, A., 2009, Proceedings of ICALEO 2009: 28th International Congress on Applications of Lasers and Electro-Optics. Orlando: Laser Institute of America, p. 1360-1366

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

  22 Citations (Scopus)

• Anode ink formulation for a fully printed flexible fuel cell stack

  Hakola, L., Parra Puerto, A., Vaari, A., Maaninen, T., Kucernak, A., Viik, S. & Smolander, M., Jun 2020, In: Flexible and Printed Electronics. 5, 2, 025002.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File
  4 Citations (Scopus)

  112 Downloads (Pure)

• Inkjet printed metallic micropillars for bare die flip-chip bonding

  Khorramdel, B., Kraft, T. M. & Mäntysalo, M., 1 Dec 2017, In: Flexible and Printed Electronics. 2, 4, 045005.

  Research output: Contribution to journal › Article › Scientific › peer-review
  7 Citations (Scopus)

• Low cost printed flexible multilayer substrates

  Jaakola, T., Lahti, M., Petäjä, J., Kautio, K., Rönkä, K. & Lenkkeri, J., 2008, Proceedings: 10th Electronics Packaging Technology Conference, EPTC 2008. Piscataway, NJ, USA: IEEE Institute of Electrical and Electronic Engineers, p. 344-349

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  9 Citations (Scopus)

• Dielectric properties of a printed sol-gel matrix composite

  Lehnert, T., Herbeck-Engel, P., Adam, J., Klein, G., Kololuoma, T. & Veith, M., 2010, In: Advanced Engineering Materials. 12, 5, p. 379-384 6 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  7 Citations (Scopus)

• The Effect of Torsional Bending on Reliability and Lifetime of Printed Silver Conductors

  Hannila, E., Remes, K., Kurkela, T., Happonen, T., Keranen, K. & Fabritius, T., Jun 2020, In: IEEE Transactions on Electron Devices. 67, 6, p. 2522-2528 7 p., 9089357.

  Research output: Contribution to journal › Article › Scientific › peer-review
  1 Citation (Scopus)

• Beyond flexible towards sustainable electronics: 55-1 / A. Vasara Invited Paper

  Vasara, A., Hakola, L., Välimäki, M., Vilkman, M., Orelma, H., Immonen, K., Torvinen, K., Hast, J. & Smolander, M., 28 Jun 2021, In: Digest of Technical Papers - SID International Symposium. 52, 1, p. 764-767 4 p.

  Research output: Contribution to journal › Article in a proceedings journal › Scientific › peer-review
  1 Citation (Scopus)

• Design of a lighting system with high-power LEDs, large area electronics, and light management structure in the LUMENTILE European project

  Carraro, L., Simonetta, M., Benetti, G., Tramonte, A., Capelli, G., Benedetti, M., Randone, E. M., Ylisaukko-oja, A., Keränen, K., Facchinetti, T. & Giuliani, G., 1 Jan 2017, Light Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XXI. Krames, M. R., Kim, J. K., Tu, L-W. & Strassburg, M. (eds.). International Society for Optics and Photonics SPIE, 1012419. (Proceedings of SPIE, Vol. 10124).

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  1 Citation (Scopus)

• R2R Electrical Sintering of Nanoparticle Structures

  Allen, M., Alastalo, A., Aronniemi, M., Mattila, T., Sääskilahti, K., Suhonen, M. & Seppä, H., 2008, p. 291-296. 6 p.

  Research output: Contribution to conference › Conference article › Scientific › peer-review

• In-mould integration of electronics into mechanics and reliability of overmoulded electronic and optoelectronic components

  Alajoki, T., Koponen, M., Juntunen, E., Petaja, J., Heikkinen, M., Ollila, J., Sitomaniemi, A., Kosonen, T., Aikio, J. & Makinen, J-T., 2009, European Microelectronics and Packaging Conference. IEEE Institute of Electrical and Electronic Engineers, p. 1-6

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review
  10 Citations (Scopus)

• Electronic Tattoo with Transferable Printed Electrodes and Interconnects for Wireless Electrophysiology Monitoring

  Huttunen, O. H., Behfar, M. H., Hiitola-Keinänen, J. & Hiltunen, J., 21 Jan 2022, (E-pub ahead of print) In: Advanced Materials Technologies.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access
  1 Citation (Scopus)

• Technologies, innovations and new business opportunities in printed intelligence

  Kopola, H., Hurme, E., Kuusisto, J-M., Smolander, M., Tuomikoski, M., Kololuoma, T., Hast, J., Känsäkoski, M., Alastalo, A., Kemppainen, A., Södergård, C., Qvintus-Leino, P. & Maaninen, A., 2007, Proceedings on CD.

  Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

• Printable, organic, and large-area realisation of integrated circuits

  Solehmainen, K., 2010, Plastic Electronics Conference & Exhibition 2010 Programme and Abstracts: Programme and Abstracts. Dresden, Germany

  Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Scientific

• Printed half-wave and full-wave rectifier circuits based on organic diodes

  Heljo, P. S., Li, M., Lilja, K. E., Majumdar, H. & Lupo, D., 2013, In: IEEE Transactions on Electron Devices. 60, 2, p. 870-874

  Research output: Contribution to journal › Article › Scientific › peer-review
  34 Citations (Scopus)

• Digital transformation and trillion sensors in paper business

  Kemppainen, A., 2016.

  Research output: Contribution to conference › Conference article › Scientific