Find Research Outputs

3D features on plastic substrate by combining thermal and UV-nanoimprinting

Haatainen, T., Mäkelä, T. & Ahopelto, J., 2009.

Research output: Contribution to conferenceConference PosterScientificpeer-review

plastics
lithography
alignment
polymers
silicon

3D flip chip packaging of MEMS sensor

Gädda, A., Tuovinen, R., Rimminen, H., Lalu, S., Saarilahti, J. & Kärkkäinen, A., 1 Jan 2014, Proceedings of the 5th Electronics System-Integration Technology Conference, ESTC 2014. IEEE Institute of Electrical and Electronic Engineers , 6962737

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Soldering alloys
Packaging
Sensors
Application specific integrated circuits
Plating
37 Citations (Scopus)

3D forming of paperboard: The influence of paperboard properties on formability

Vishtal, A., Hauptmann, M., Zelm, R., Majschak, J-P. & Retulainen, E., 2014, In : Packaging Technology and Science. 27, 9, p. 677-691

Research output: Contribution to journalArticleScientificpeer-review

Paperboards
Formability
Packaging
Modified atmosphere packaging
Mechanical properties

3-D imaging with scannerless LIDAR

Ailisto, H., Heikkinen, V., Mitikka, R., Myllylä, R., Kostamovaara, J., Mäntyniemi, A., Koskinen, M., Ulbrich, G. & Pereira do Carmo, J., 2001, Proceedings of ODIMAP III: 3nd Topical Meeting on Optoelectronic Distance/Displacement Measurements and Applications. Pavia, IT, 20 - 22 Sept. 2001. Pavia, p. 202-207

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access

3D measurement controlled by a cad model-based measurement planning and vision system

Ailistö, H., Mitikka, R., Moring, I., Jokinen, H. & Kaisto, I., 1 Jan 1996, In : International Journal of Pattern Recognition and Artificial Intelligence. 10, 2, p. 151-164 14 p.

Research output: Contribution to journalArticleScientificpeer-review

Planning
Robots
Computer aided design
Range finders
Industrial applications

3D measurement controlled by a CAD model-based measurement planning and vision system

Ailisto, H., Mitikka, R., Moring, I., Jokinen, H. & Kaisto, I., 1996, Machine vision for advanced production. Pietikäinen, M. & Pau, L-F. (eds.). World Scientific Publishing, p. 151-164 (Series in machine perception and artificial intelligence, Vol. 22).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

10 Citations (Scopus)

3D micromechanical compass

Kyynäräinen, J., Saarilahti, J., Kattelus, H., Meinander, T., Suhonen, M., Oja, A., Seppä, H., Pekko, P., Kuisma, H., Ruotsalainen, S. & Tilli, M., 1 Mar 2007, In : Sensor Letters. 5, 1, p. 126-129

Research output: Contribution to journalArticleScientificpeer-review

Magnetometers
magnetometers
chips
coils
flux density
5 Citations (Scopus)

3D micro-nano structured hybrid scaffolds: An investigation into the role of nanofiber coating on viability, proliferation and differentiation of seeded mesenchymal stem cells

Pilehrood, M. K., Atashi, A., Sadeghi-Aliabadi, H., Nousiainen, P. & Harlin, A., 2016, In : Journal of Nanoscience and Nanotechnology. 16, 9, p. 9000-9007

Research output: Contribution to journalArticleScientificpeer-review

Nanofibers
Mesenchymal Stromal Cells
Polystyrenes
Osteoblasts
Adipocytes

3D-muodonhaku: Menetelmiä ja sovelluksia

Translated title of the contribution: 3D Shape Retrieval: Methods and ApplicationsTossavainen, T., Sääski, J., Ruusu, R., Salonen, T. & Granholm, G., 2007, Espoo: VTT Technical Research Centre of Finland. 41 p. (VTT Working Papers; No. 77).

Research output: Book/ReportReport

Open Access

3-D näkö ja kolmiulotteinen muodonmittaus

Ailisto, H., 1989, Helsinki. 6 p.

Research output: Book/ReportReport

15 Citations (Scopus)

3D Nanostructuring of hydrogen silsesquioxane resist by 100 keV electron beam lithography

Vila-Comamala, J., Gorelick, S., Guzenko, V. A. & David, C., 2011, In : Journal of Vacuum Science and Technology B: Nanotechnology and Microelectronics. 29, 6, 5 p., 06F301.

Research output: Contribution to journalArticleScientificpeer-review

Electron beam lithography
Hydrogen
NEMS
Photonic crystals
Aspect ratio

3D-ohutlevykappaleen nopea piensarjavalmistus

Penttilä, R., Savinainen, T. & Varis, J., 2000, In : Ohutlevy. 2, p. 18-19

Research output: Contribution to journalArticleProfessional

3D-ohutlevytuotteiden joustava räätälöity sarjavalmistus ja automatisoidun valmistuksen uudet prosessit

Savinainen, T., Määttä, T. & Kujanpää, V., 2010, SISU 2010 - Uusi tuotantoajattelu: Loppuraportti. Helsinki: TEKES, p. 91-93 (Tekesin ohjelmaraportti; No. 1/2010).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

3D-paikkatietoselaimet tulevat

Parmes, E. & Rainio, K., 2006, In : Positio. 1, p. 17-19

Research output: Contribution to journalArticleProfessional

66 Citations (Scopus)

3D-printable bioactivated nanocellulose-alginate hydrogels

Leppiniemi, J., Lahtinen, P., Paajanen, A., Mahlberg, R., Metsä-Kortelainen, S., Pinomaa, T., Pajari, H., Vikholm-Lundin, I., Pursula, P. & Hytönen, V., 2017, In : ACS Applied Materials & Interfaces. 9, 26, p. 21959-21970 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Hydrogels
Hydrogel
Alginate
Printing
Avidin

3D-printing of cellulosic materials: Properties and suitability on cellulosic fabrics

Tenhunen, T-M., Varis, P., Kammiovirta, K., Puolakka, A., Setälä, H., Harlin, A., Kääriäinen, P., Österberg, M., Tammelin, T. & Orelma, H., 2017.

Research output: Contribution to conferenceConference articleScientific

3D Printing of Soft Magnetic Cores For Electrical Machines

Pippuri, J., Metsä-Kortelainen, S., Lindroos, T., Savolainen, M., Jokinen, A., Revuelta, A., Pasanen, A. & Ruusuvuori, K., 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. Aaltonen, J., Virkkunen, R., Koskinen, K. T. & Kuivanen, R. (eds.). Tampere University of Technology, p. 48-51 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access
3D printers
Magnetic cores
Printing
Machine design
Steel sheet
16 Citations (Scopus)

3D processing on 6 in. high resistive SOI wafers: Fabrication of edgeless strip and pixel detectors

Eränen, S., Kalliopuska, J., Orava, R., van Remortel, N. & Virolainen, T., 2009, In : Nuclear Instruments and Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 607, 1, p. 85-88

Research output: Contribution to journalArticleScientificpeer-review

strip
Pixels
pixels
insulators
wafers

3D radiation pattern measurement of LTCC antennas at 60 GHz

Lamminen, A., Titz, D., Kyrö, M., Azhar, S. M., Ferrero, F., Luxey, C., Säily, J., Jacquemond, G. & Vainikainen, P., 2011, Millimetre Wave Days Proceedings: Fourth Global Symposium on Millimeter Waves GSMM2011. p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Directional patterns (antenna)
Antenna feeders
Antennas
Radiation
Temperature

3D RF integration at VTT

Vähä-Heikkilä, T., 2013, Nanosensors, Biosensors, and Info-Tech Sensors and Systems . Varadan, V. K. (ed.). International Society for Optics and Photonics SPIE, 86910V. (Proceedings of SPIE, Vol. 8691).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Temperature

3D-ROCK Mallinnusjärjestelmä kallioperän rakennetutkimuksiin

Translated title of the contribution: SD-ROCK Modelling system for structural investigations of the bedrockVaittinen, T., Torpo, A., Hakala, M., Johansson, E. & Halonen, O., 1992, Espoo: VTT Technical Research Centre of Finland. 112 p. (VTT Julkaisuja - Publikationer, Vol. 763).

Research output: Book/ReportReport

bedrock
1 Citation (Scopus)

3DS-colorimeter based on a mobile phone camera for industrial applications

Miettinen, J., Martinkauppi, B. & Suopajärvi, P., 2013, Sensors, Cameras, and Systems for Industrial and Scientific Applications XIV. Widenhorn, R. (ed.). International Society for Optics and Photonics SPIE, 86590M. (Proceedings of SPIE, Vol. 8659).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Colorimeters
Mobile phones
Industrial applications
Cameras
Color
7 Citations (Scopus)

3D simulations of 3D silicon radiation detector structures

Kalliopuska, J., Eränen, S. & Orava, R., 2006, In : Nuclear Instruments and Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 568, 1, p. 27-33

Research output: Contribution to journalArticleScientificpeer-review

silicon radiation detectors
Silicon detectors
Radiation detectors
Detectors
Surface charge

3D tulee etäläsnäolosovelluksiin

Valli, S., 2010, In : GT-lehti. 4, p. 30-31

Research output: Contribution to journalArticleProfessional

3D tuli elokuvateatteriin

Laine, J., 2008, In : GT-lehti. 7, 21.

Research output: Contribution to journalArticleProfessional

3D-tulostuksella lisäarvoa tuotteisiin

Kujanpää, V., 2015.

Research output: Contribution to conferenceConference articleProfessional

Open Access

3D-tulostuksen suunnittelu- ja päätöksenteko-opas yrityksille

Sekhurov, S., Eklund, P., Kujanpää, V., Pekkarinen, J., Syrjälä, K. & Vihinen, J., 2017, 42 p. (DIMECC Publications Series; No. 12).

Research output: Book/ReportReport

Open Access

3D-tulostus

Kujanpää, V., 2017.

Research output: Contribution to conferenceConference articleProfessional

3D-tulostus ja lämpökäsittely - prosessiparametrit, muodostuvat mikrorakenteet ja lämpökäsittelyt

Sirén, M., 2017. 29 p.

Research output: Contribution to conferenceOther conference contributionProfessional

Open Access

3D-tulostus mullistaa elintarvikkeiden tuotannon

Metsä-Kortelainen, S., Lille, M., Sözer, N. & Kalpio, T., 2016, In : Promaint. 29, 5, p. 42-44

Research output: Contribution to journalArticleProfessional

3D visualisation as a tool for managing diagnostic and prognostic information of industrial machinery

Rönkkö, J., Rainio, K., Hagberg, V-M., Järvinen, P., Markkanen, J. & Ylikerälä, M., 2006, Prognostics for industrial machinery availability: Final seminar. Espoo: VTT Technical Research Centre of Finland, p. 38-48

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access
XML
Machinery
Visualization
User interfaces
Cranes
1102 Downloads (Pure)

3GPP nonterrestrial networks: A concise review and look ahead

Anttonen, A., Ruuska, P. & Kiviranta, M., 2019, VTT Technical Research Centre of Finland. 31 p. (VTT Research Report; No. VTT-R-00079-19).

Research output: Book/ReportReport

Open Access
File

3GSM World Congress 2003: "Korvat+suu+silmät" on tulevaisuuden matkapuhelinviestinnän suunta

Kangas, S., 2003, In : GT-lehti. 1, p. 3-5

Research output: Contribution to journalArticleProfessional

1 Citation (Scopus)

3He dimers in two-dimensional 3He–4He mixture films

Saarela, M., Paaso, J., Krotscheck, E. & Schörkhuber, K., 2000, In : Physica B: Condensed Matter. 284-288, Part 1, p. 331-332 2 p.

Research output: Contribution to journalArticleScientificpeer-review

Dimers
dimers
Binding energy
Ground state
solidification

3-omega measurement of thermal conductivities of Thermal Interface Materials in the range 10 - 300 K

Chapuis, P., Schmidt, M., Cuffe, J., Prunnila, M., Ahopelto, J. & Sotomayor Torres, C. M., 2009, Book of Abstracts (CD). Materials research society

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

3rd European Federation of Biotechnology Conference: Physiology of Yeasts and Filamentous Fungi PYFF3

Kuokka-Ihalainen, A. (ed.), Saloheimo, M. (ed.) & Pakula, T. (ed.), 2007, Espoo: VTT Technical Research Centre of Finland. 193 p. (VTT Symposium; No. 245).

Research output: Book/ReportBook (editor)

Open Access
biotechnology
yeast
physiology
fungus
academic research

3rd Generation revolution or evolution?

Mitts, H., 1995, In : Mobile Communications International. May, p. 35-38

Research output: Contribution to journalArticleProfessional

3-ulotteisen pohjavesivirtausmallinnuksen edistyneet menetelmät ja työkalut

Koskinen, L., 1991, Pohjavesimallinnuksen seminaari. Espoo: VTT Technical Research Centre of Finland, p. 75-80 (VTT Symposium; No. 126).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsProfessional

3x3 transfer matrix modelling of integrated optical devices

Cherchi, M., 16 Mar 2018, (Submitted) In : arXiv preprint. 6 p., 1803.06208.

Research output: Contribution to journalOther journal contributionScientific

Optical devices
Resonators
Boundary conditions
Geometry
1 Citation (Scopus)

3μm silicon photonics

Aalto, T., Cherchi, M., Harjanne, M., Sun, F. & Kapulainen, M., 1 Jan 2018, 2018 Optical Fiber Communications Conference and Exposition, OFC 2018 - Proceedings. Optical Society of America OSA, Vol. Part F84-OFC 2018. p. 3-5 3 p. TU3A.5

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Silicon
Photonics
Integrated circuits
Infrared radiation
14 Citations (Scopus)

0/2 harmonic emission from thin foils

Aboites, V., Hughes, T., McGoldrick, E., Sim, S., Karttunen, S. & Evans, R., 1985, In : The Physics of Fluids. 28, 8, p. 2555 - 2562 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Metal foil
Plasma waves
Refraction
Laser pulses
Plasmas

4,4'-[Thiophene-2,5-diylbis(ethyne-2,1-diyl)]dibenzonitrile

Figueira, J., Vertlib, V., Rodrigues, J., Nättinen, K. & Rissanen, K., 2008, In : Acta Crystallographica Section E: Structure Reports Online. E64, 4, p. o765-o766

Research output: Contribution to journalArticleScientificpeer-review

Open Access
Thiophenes
Acetylene
Thiophene
thiophenes
Molecules

4. nordiska murverkssymposiet. Del 1

VTT, 1982, Espoo: VTT Technical Research Centre of Finland. 540 p. (VTT Symposium; No. 13).

Research output: Book/ReportBook (editor)

4. nordiska murverkssymposiet. Del 2

VTT, 1982, Espoo: VTT Technical Research Centre of Finland. 210 p. (VTT Symposium; No. 20).

Research output: Book/ReportBook (editor)

4. pohjoismaisten rakennustutkijain kokous Helsingissä 29.-31.8.1952: Selostuksia

Virtala, V. & Tuomola, T., 1953, Helsinki: VTT Technical Research Centre of Finland. 22 p. (Valtion teknillinen tutkimuslaitos. Tiedoitus; No. 112).

Research output: Book/ReportReport

4. pohjoismaisten rakennustutkijain kokous Helsingissä 29.-31.8.1952: Esitelmät

Lauritzen, V., Birkeland, Ö., Jacobsson, M. & Rahtu, H., 1953, Helsinki: VTT Technical Research Centre of Finland. 39 p. (Valtion teknillinen tutkimuslaitos. Tiedoitus; No. 111).

Research output: Book/ReportReport

40 vuotta tietopalvelutoimintaa. Julkaisu- ja kirjallisuuspalveluosastosta informaatiopalvelulaitokseksi

Lehti, M. & Tirronen, K., 1987, In : Informaatiopalvelu tiedottaa. 5, 1, p. 3-7

Research output: Contribution to journalArticleProfessional

41st R3-Nordic Symposium: Cleanroom technology, contamination control and cleaning

Wirtanen, G. (ed.) & Salo, S. (ed.), 2010, Espoo: VTT Technical Research Centre of Finland. 228 p. (VTT Symposium; No. 266).

Research output: Book/ReportBook (editor)

Open Access
electronics industry
pharmaceutical industry
food industry
risk assessment
contamination

43 lehden toimitustilasto. Oma lehti tuottaa puolet lehden tekstiaineistosta

Siivonen, T., 1986, In : Suomen Lehdistö. 57, 10, p. 32-34

Research output: Contribution to journalArticleProfessional