Find Research Outputs

Search concepts
Selected filters
2019
1 Citation (Scopus)

A multiscale modelling approach for estimating the effect of defects in unidirectional carbon fiber reinforced polymer composites

Antin, K. N., Laukkanen, A., Andersson, T., Smyl, D. & Vilaça, P., 12 Jun 2019, In : Materials. 12, 12, 15 p., 2885.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
Carbon fibers
Polymers
Defects
Composite materials
Microstructure

Data-Driven Optimization Of Metal Additive Manufacturing Solutions

Laukkanen, A., Pinomaa, T., Andersson, T., Lindroos, M., Yashchuk, I. & Suhonen, T., Oct 2019, Euro PM2019 Proceedings. European Power Metallurgy Association EPMA

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Deformation and damage mechanisms in high entropy alloys by multiscale materials modeling

Laukkanen, A., Lindroos, M., Andersson, T. & Suhonen, T., Sep 2019.

Research output: Contribution to conferenceConference AbstractScientific

Finite element modeling of Al6082 Plasma Electrolytic Oxidation coatings

Khakalo, S., Laukkanen, A., Suhonen, T., Holmberg, K., Bousser, E., Yerokhin, A., Withers, P. J. & Matthews, A., Oct 2019, Proceedings of the 32nd Nordic Seminar on Computational Mechanics. Niemi, A. H. & Koivurova, H. (eds.). University of Oulu, p. 104-107 4 p. (University of Oulu: Mechanical Engineering. Report ; No. 9).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access
coatings
oxidation
unloading
indentation
aluminum alloys

Micromechanical Modeling-Based Damage Laws for Fatigue Design of Additively Manufactured IN718 Alloy

Laukkanen, A., Pinomaa, T., Lindroos, M. & Andersson, T., Jun 2019, Additive Manufacturing with Powder Metallurgy 2019, AMPM2019 Conference Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Micromechanical modeling of polycrystalline high manganese austenitic steel subjected to abrasive contact

Lindroos, M., Laukkanen, A. & Andersson, T., Dec 2019, In : Friction. 17 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
Austenitic steel
Manganese
Abrasives
Twinning
Dislocations (crystals)
1 Citation (Scopus)

Micromechanical modeling of short crack nucleation and growth in high cycle fatigue of martensitic microstructures

Lindroos, M., Laukkanen, A., Andersson, T., Vaara, J., Mäntylä, A. & Frondelius, T., Dec 2019, In : Computational Materials Science. 170, 13 p., 109185.

Research output: Contribution to journalArticleScientificpeer-review

short cracks
High Cycle Fatigue
Nucleation
Microstructure
Crack

Process-Structure-Properties Modeling of Selective Laser Melted Maraging Steel Using Phase-Field Method and Crystal Plasticity

Pinomaa, T., Lindroos, M., Andersson, T. & Laukkanen, A., Jun 2019, Additive Manufacturing with Powder Metallurgy 2019, AMPM2019 Conference Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Process-Structure-Properties-Performance Modeling for Selective Laser Melting

Pinomaa, T., Yashchuk, I., Lindroos, M., Andersson, T., Provatas, N. & Laukkanen, A., 24 Oct 2019, In : Metals. 9, 11, 1138.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
Melting
Fatigue of materials
Lasers
Powders
Defects
2018
2 Citations (Scopus)

Characterization of DLC-Coated and Uncoated Surfaces by New Directional Blanket Curvature Covering (DBCC) Method

Wolski, M., Podsiadlo, P., Stachowiak, G. W., Holmberg, K., Laukkanen, A. & Ronkainen, H., 2018, In : Tribology Letters. 66, 4, 153.

Research output: Contribution to journalArticleScientificpeer-review

Diamond
blankets
Diamonds
coverings
Carbon
7 Citations (Scopus)

Crystal Growth in Polyethylene by Molecular Dynamics: The Crystal Edge and Lamellar Thickness

Verho, T., Paajanen, A., Vaari, J. & Laukkanen, A., 10 Jul 2018, In : Macromolecules. 51, 13, p. 4865-4873 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
Polyethylene
Crystallization
Crystal growth
Molecular dynamics
Polyethylenes
10 Citations (Scopus)

Crystal plasticity modeling and characterization of the deformation twinning and strain hardening in Hadfield steels

Lindroos, M., Cailletaud, G., Laukkanen, A. & Kuokkala, V. T., 21 Mar 2018, In : Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 720, p. 145-159 15 p.

Research output: Contribution to journalArticleScientificpeer-review

strain hardening
Steel
Twinning
twinning
Strain hardening
4 Citations (Scopus)

Microstructure based modeling of the strain rate history effect in wear resistant Hadfield steels

Lindroos, M., Laukkanen, A., Cailletaud, G. & Kuokkala, V. T., 15 Feb 2018, In : Wear. 396-397, p. 56-66 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Steel
strain rate
Strain rate
Wear of materials
histories
3 Citations (Scopus)

Utilizing the theory of critical distances in conjunction with crystal plasticity for low-cycle notch fatigue analysis of S960 MC high-strength steel

Dabiri, M., Lindroos, M., Andersson, T., Afkhami, S., Laukkanen, A. & Björk, T., 1 Dec 2018, In : International Journal of Fatigue. 117, p. 257-273 17 p.

Research output: Contribution to journalArticleScientificpeer-review

High Strength Steel
Crystal Plasticity
Notch
High strength steel
Fatigue
2017
1 Citation (Scopus)

A crystal plasticity approach for shear banding in hot rolled high-strength steels

Lindroos, M., Laukkanen, A. & Kuokkala, V-T., 2017, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 48, 11, p. 5608-5615 8 p.

Research output: Contribution to journalArticleScientificpeer-review

high strength steels
High strength steel
plastic properties
Plasticity
Textures
16 Citations (Scopus)

Comparison of laboratory rolling-sliding wear tests with in-service wear of nodular cast iron rollers against wire ropes

Oksanen, V., Valtonen, K., Andersson, P., Vaajoki, A., Laukkanen, A., Holmberg, K. & Kuokkala, V. T., 1 Jan 2017, In : Wear. 340-341, p. 73-81

Research output: Contribution to journalArticleScientificpeer-review

Wire rope
Nodular iron
rollers
wear tests
sliding

Digitaalinen materiaalikehitys luo säästöä ja tehokkuutta teollisuuden materiaaliratkaisuihin

Lindoors, M., Laukkanen, A., Andersson, T. & Holmberg, K., 2017, In : Hitsaustekniikka. 69, 1, p. 41-42

Research output: Contribution to journalArticleProfessional

Digital engineering and agile manufacturing as future enablers

Kortelainen, J., Laukkanen, A., Puukko, P. & Komi, E., 2017, Towards a new era in manufacturing: Final report of VTT's For Industry spearhead programme. VTT Technical Research Centre of Finland, p. 53-65 (VTT Technology, Vol. 288).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

Digitalizing materials development

Hokka, M., Kuokkala, V-P., Laukkanen, A. & Holmberg, K., 2017, BSA - Breakthrough Steels and Applications: Final Report 3/2017. p. 130-142 (DIMECC Publications Series; No. 16).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

DIMECC Breakthrough materials doctoral school

Heino, M., Hokka, M., Kuokkala, V-T., Holmberg, K. & Laukkanen, A., 2017, BSA - Breakthrough Steels and Applications: Final Report 3/2017. p. 143-148 (DIMECC Publications Series; No. 16).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

Focus on friction and wear

Lehtovaara, A., Laukkanen, A., Morales-Espejel, G. E., Kallio, M., Linjamaa, A. & Norrby, T., 1 Jan 2017, In : Tribologia. 35, 3, p. 16-19 4 p.

Research output: Contribution to journalArticleScientificpeer-review

Finland
Technical presentations
tribology
friction
Tribology

Integrated computational materials engineering for emerging manufacturing technologies

Andersson, T., Laukkanen, A., Sippola, M., Majaniemi, S., Pinomaa, T. & Suhonen, T., 2017, Towards a new era in manufacturing: Final report of VTT's For Industry spearhead programme. VTT Technical Research Centre of Finland, p. 66-71 (VTT Technology, Vol. 288).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

4 Citations (Scopus)

Multiscale characterisation of 3D surface topography of DLC coated and uncoated surfaces by directional blanket covering (DBC) method

Wolski, M., Podsiadlo, P., Stachowiak, G. W., Holmberg, K., Laukkanen, A., Ronkainen, H., Gee, M., Nunn, J., Gachot, C. & Li, L., 2017, In : Wear. 388-389, p. 47-56 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Diamond
blankets
Surface topography
Diamonds
topography
5 Citations (Scopus)

On the effect of deformation twinning and microstructure to strain hardening of high manganese austenitic steel 3D microstructure aggregates at large strains

Lindroos, M., Laukkanen, A., Cailletaud, G. & Kuokkala, V., 15 Oct 2017, In : International Journal of Solids and Structures. 125, p. 68-76 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Twinning
Manganese
Strain Hardening
Large Strain
Austenitic steel
5 Citations (Scopus)

Topographical orientation effects on surface stresses influencing on wear in sliding DLC contacts, Part 2: Modelling and simulations

Laukkanen, A., Holmberg, K., Ronkainen, H., Stachowiak, G., Podsiadlo, P., Wolski, M., Gee, M., Gachot, C. & Li, L., 15 Oct 2017, In : Wear. 388-389, p. 18-28 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Diamond
sliding
Diamonds
Carbon
diamonds
2016
4 Citations (Scopus)

An investigation into the effect of substrate on the load-bearing capacity of thin hard coatings

Wang, C. T., Hakala, T. J., Laukkanen, A., Ronkainen, H., Holmberg, K., Gao, N., Wood, R. J. K. & Langdon, T. G., 2016, In : Journal of Materials Science. 51, 9, p. 4390-4398

Research output: Contribution to journalArticleScientificpeer-review

Hard coatings
Bearing capacity
Loads (forces)
Substrates
Coatings

Component scale process model for metal additive manufacturing

Andersson, T., Laukkanen, A., Pinomaa, T., Laakso, P., Puukko, P., Lindroos, T. & Laitinen, T., 2016, World PM2016 Proceedings. European Power Metallurgy Association EPMA

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

6 Citations (Scopus)

Effective interface model for design and tailoring of wc-co microstructures

Laukkanen, A., Pinomaa, T., Holmberg, K. & Andersson, T., 2016, In : Powder Metallurgy. 59, 1, p. 20-30

Research output: Contribution to journalArticleScientificpeer-review

microstructure
Microstructure
Composite materials
composite materials
Tungsten carbide

Modelling chloride ingress under freeze-thaw loading: 3D FEM approach

Laukkanen, A., Pinomaa, T., Andersson, T., Ferreira, M. & Bohner, E., 2016. 8 p.

Research output: Contribution to conferenceConference articleScientific

Modelling fracture behaviour of high strength low alloy steel with microstructural FE model and crystal plasticity

Andersson, T., Laukkanen, A., Sippola, M. . S., Saukkonen, T. & Hänninen, H., 2016.

Research output: Contribution to conferenceConference articleScientific

Multiscale characterisation of 3D surface topography of DLC coated and uncoated surfaces by directional blanket covering (DBC) method

Wolski, M., Podsiadlo, P., Stachowiak, G., Holmberg, K., Laukkanen, A., Ronkainen, H., Gee, M., Nunn, J., Gachot, C. & Li, L., 2016, In : Wear. 388-389, p. 47-56

Research output: Contribution to journalArticleScientificpeer-review

Diamond
blankets
Surface topography
Diamonds
topography

Multiscale interface model for design of nano-microstructures in hard materials

Laukkanen, A., Pinomaa, T., Andersson, T., Paajanen, A., Lindroos, T. & Holmberg, K., 2016, World PM2016 Proceedings. European Power Metallurgy Association EPMA

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Multiscale materials modeling for metal additive manufacturing

Laukkanen, A., Andersson, T., Pinomaa, T., Majaniemi, S., Sippola, M. & Suhonen, T., 2016.

Research output: Contribution to conferenceOther conference contributionScientific

Multiscale Materials Modeling of Coatings

Suhonen, T., Laukkanen, A., Andersson, T., Pinomaa, T. & Holmberg, K., 2016, p. 20-23.

Research output: Contribution to conferenceConference articleScientific

21 Citations (Scopus)

Optimization and simulation of SLM process for high density H13 tool steel parts

Laakso, P., Riipinen, T., Laukkanen, A., Andersson, T., Jokinen, A., Revuelta, A. & Ruusuvuori, K., 2016, Physics Procedia. Elsevier, Vol. 83. p. 26-35

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
Tool steel
Melting
Lasers
Hatches
High strength steel
4 Citations (Scopus)

Predicting stiffness and strength of birch pulp: Polylactic acid composites

Sippola, M., Immonen, K., Miettinen, A., Laukkanen, A., Andersson, T., Peltola, H., Harlin, A. & Holmberg, K., 2016, In : Journal of Composite Materials. 50, 18, p. 2549-2563

Research output: Contribution to journalArticleScientificpeer-review

Pulp
Stiffness
Acids
Composite materials
Fibers

Process model for metal additive manufacturing

Andersson, T., Laukkanen, A. & Pinomaa, T., 2016.

Research output: Contribution to conferenceConference articleScientific

Relaxation behaviour of copper in disposal canisters

Rantala, J., Pohja, R., Auerkari, P., Laukkanen, A. & Andersson, T., 2016, Baltica X: International Conference on Life Management and Maintenance for Power Plants. Auerkari, P. (ed.). Espoo: VTT Technical Research Centre of Finland, 8 p. (VTT Technology, Vol. 261).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
cans
disposal
copper
creep analysis
waste disposal

Topographical orientation effects on friction and wear in sliding DLC, part 2: modelling and simulations

Laukkanen, A., Holmberg, K., Ronkainen, H., Stachowiak, G., Podsiadlo, P., Wolski, M., Gee, M., Gachot, C. & Li, L., 2016.

Research output: Contribution to conferenceConference articleScientific

VTT ProperTune: Computational multiscale materials modeling concept

Suhonen, T., Laukkanen, A., Andersson, T., Pinomaa, T. & Holmberg, K., 23 May 2016

Research output: Non-textual formWeb publication/siteProfessional

Open Access
Powders
Software engineering
Physics
Processing

VTT ProperTune: Computational Multiscale Materials Modeling Concept

Suhonen, T., Laukkanen, A., Andersson, T., Pinomaa, T. & Holmberg, K., 2016, In : Thermal Spray Bulletin. 68, 2, p. 102-106

Research output: Contribution to journalArticleScientificpeer-review

2015

Additive manufacturing of spare part supported by digital design concept

Laitinen, T., Julkunen, P., Laukkanen, A., Puukko, P. & Turunen, E., 2015, Advances in Powder Metallurgy and Particulate Materials : Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2015.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

3D printers
spare parts
manufacturing
routes
microstructure

Effective interface model for design and tailoring of wc-co microstructures

Laukkanen, A., Andersson, T., Pinomaa, T. & Holmberg, K., 2015, Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition. European Power Metallurgy Association EPMA

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Carbides
microstructure
Microstructure
carbides
Binders
17 Citations (Scopus)

Experimental study on the behavior of wear resistant steels under high velocity single particle impacts

Lindroos, M., Apostol, M., Kuokkala, V-T., Laukkanen, A., Valtonen, K., Holmberg, K. & Oja, O., 2015, In : International Journal of Impact Engineering. 78, p. 114-127

Research output: Contribution to journalArticleScientificpeer-review

Wear of materials
Steel
Strain rate
Projectiles
Carbides

Low-temperature fracture characteristics of new 900-960 MPa yield ultra-high strength and 12% Cr ferritic stainless steel grades for structural use

Nevasmaa, P., Karjalainen-Roikonen, P. & Laukkanen, A., 2015. 31 p.

Research output: Contribution to conferenceConference articleScientific

Material integrity of welded copper overpack: Annual report 2014

Rantala, J., Auerkari, P., Laukkanen, A., Andersson, T. & Saukkonen, T., 2015, VTT Technical Research Centre of Finland. 17 p. (VTT Research Report, Vol. VTT-R-00773-15).

Research output: Book/ReportReport

Open Access
integrity
copper
cans
oxides
waste disposal